diff --git a/docs/Installation/Firmware/freenove-esp32s3-n16r8.md b/docs/Installation/Firmware/freenove-esp32s3-n16r8.md
new file mode 100644
index 000000000..2b0935fc3
--- /dev/null
+++ b/docs/Installation/Firmware/freenove-esp32s3-n16r8.md
@@ -0,0 +1,49 @@
+# Firmware Installation (Freenove ESP32S3)
+
+## Manual Firmware Installation / Manual Firmware Update
+
+  ### 1. Flash microcontroller content (ESP32S3 based microcontroller)
+
+   - Put your board into bootloader mode (IO0 grounded + board reset)
+   - Three files to be flashed with correct flash offset
+
+      | Filename          | Offset      | Description
+      |:------------------|:------------|:------
+      | bootloader.bin    | 0x0         | Bootloader
+      | partitions.bin    | 0x8000      | Partition definition
+      | firmware.bin      | 0x10000     | User application
+  
+  - Use `Flash Download Tool` from Espressif or the console-based `esptool` to flash the files.
+  Usage is described [here](https://jomjol.github.io/AI-on-the-edge-device-docs/Installation/#flashing-using-the-flash-tool-from-espressif-gui).
+
+
+  ### 2. Prepare SD Card
+  - Format SD card with FAT32 (Windows recommenend. In MacOS formated cards could not working properly)
+  - Copy folders `/config` and `/html` from zip file to SD card root folder
+
+
+  ### 3. Configure WLAN
+
+  #### Option 1: Modify content directly in config file
+  Use config.json template from `sdcard/config/template` folder, copy it to 
+  `sdcard/config` folder and to configure your wlan connection.<br>
+  Note 1: If device is already booted once, a full config with default configuration is already sitting in `/config` folder. 
+  You can also use this file, search for section network and adapt the wlan config there.
+  Note 2: Be careful with syntax. Messing up the JSON notation, config is getting rejected.
+  
+  #### Option 2: Use Access Point feature
+  Usage is decribed [here](https://jomjol.github.io/AI-on-the-edge-device-docs/Installation/#remote-setup-using-the-built-in-access-point).
+
+
+
+## Web-based Firmware Installer
+
+ --> Not supported up to now.
+
+
+
+## OTA (Over-The-Air) Firmware Update
+
+  Select firmware package zip from github repository in WebUI OTA Updater page. 
+  The device is getting updated automatically. The existing configuration will not be overwritten.
+