Report libraries that do and do not work! #99
Replies: 7 comments 11 replies
-
I've been having trouble with getting the Ethernet lib to work with a w5500. Firstly, Udp.h needed the beginMulticast() virtual function added. But im still having issues. I think this might be a problem with the SPI lib but without and osciliscope or the any expertise with avr/arduino i can't speak intelligently. It might just be me. |
Beta Was this translation helpful? Give feedback.
-
DS1307RTC - works with small amendment This library almost works, but creates an instance which it calls RTC - this conflicts with the AVR's RTC. Renaming this instance within the library fixed it for me. |
Beta Was this translation helpful? Give feedback.
-
https://github.com/SpenceKonde/DS1307RTC
Does this work unmodified for you?
…On Fri, Apr 30, 2021 at 3:22 PM VernierCoven ***@***.***> wrote:
It's from here <https://github.com/PaulStoffregen/DS1307RTC>.
There is a check in it to see if RTC is already defined, and if it is to
undefine it. That was problematic for me, as I needed the AVR's RTC as well
as the external RTC.
Cheers!
—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub
<#99 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/ABTXEW6PWV2O6LK5IEF422TTLL7QRANCNFSM42P7IWGA>
.
--
____________
Spence Konde
Azzy’S Electronics
New products! Check them out at tindie.com/stores/DrAzzy
GitHub: github.com/SpenceKonde
ATTinyCore <https://github.com/SpenceKonde/ATTinyCore>: Arduino support for
all pre-2016 tinyAVR with >2k flash!
megaTinyCore <https://github.com/SpenceKonde/megaTinyCore>: Arduino support
for all post-2016 tinyAVR parts!
DxCore <https://github.com/SpenceKonde/DxCore>: Arduino support for the AVR
Dx-series parts, the latest and greatest from Microchip!
Contact: ***@***.***
|
Beta Was this translation helpful? Give feedback.
-
Hello, congratulations on your work. |
Beta Was this translation helpful? Give feedback.
-
About the LCD, I'm currently using https://github.com/laurb9/StepperDriver, the author says it is a derivate of the original Arduino LiquidCrystal Library but 5 times faster, and also works with 4, 8 wire parallel interface, I2C IO port expander (native I2C and bit bang) and Shift Regiter. Maybe it fits your need. |
Beta Was this translation helpful? Give feedback.
-
sorry, it is https://github.com/fmalpartida/New-LiquidCrystal |
Beta Was this translation helpful? Give feedback.
-
I believe PS2KeyAdvanced is working. I added the following to the PS2KeyAdvanced.h file:
https://github.com/techpaul/PS2KeyAdvanced I get similar output on an Arudino Pro Mini. |
Beta Was this translation helpful? Give feedback.
-
In the same spirit as the ongoing discussion on megaTinyCore... I know people must be using third party libraries with DxCore.
If people who are using this core could let me know which libraries they have used (include link to where that library comes from) or tried to use and whether they did or did not work, so I can gather all that together on a page with a big table of libraries, that'd be a big help, and we will all benefit from tables of known working libraries.
And also, a list of libraries known to not work (ideally, with a reason why they don't work so we can figure out what is needed to make them work and if it's worth the effort of doing.) would be of value too.
It is highly likely that anything that works on megaTinyCore will work here. There were some rough patches w/regards to I2C in recent months (on both cores), but those are sorted out by now. As are some old SPI issues from the beginning of the year, and the cores are VERY similar. That list is at: https://github.com/SpenceKonde/megaTinyCore/blob/master/megaavr/extras/LibraryCompatibility.md
Beta Was this translation helpful? Give feedback.
All reactions