README_EN

# sputnik_material_nft

This is a description of the material NFT, its composition, how it works and other useful information that may be useful to techno-magicians in the future to recreate the same or a similar artifact.

Every techno-mage should know that before casting any artifact, you need to prepare the primary elements: what the artifact will be created from.

The durability of the artifact will depend on the quality and purity of the primary elements, and the energy and thoughts invested by the magician during creation charges the artifact with the power of its impact on the material world.

Sputnik Material NFT consists of:

- beech tree
- plywood
- plexiglass 3 mm
- film on a transparent backing
- light blocking film
- diodes 2812b
- arduino nano shield
- arduino nano
- mgtf wires
- tact buttons
- microphone with dac
- resistors 1 kOhm
- resistor 10 kOhm
- magnetic power connector 10A
- power supply 5V 20A
- Neodymium magnets
- plastic parts printed on a 3D printer (petg plastic)
- picture mounts

Source materials

stl files for printing and source file for fusion 360

Description of Print Settings

Device diagram

General description of firmware for Arduino

Description of basic settings for each mode