Bosswerk MI600 / Deye SUN600

[hburkert]

My Bosswerk MI600 works fine with "deye-string.yaml". But you must supply your loggers serial-no and not inverter-serial-no in const.py

[ptalke]

If you want to additionally have the Temperature Reading from the Inverter, you can add the following to the yaml file:
Since there seems to be an offset of 1000, the measurement is 10 degrees to high.
Source: https://www.photovoltaikforum.com/thread/169125-answer-everything-about-deye-inverters/?postID=2722038#post2722038
- name: "AC Radiator Temp - substract 10 degrees"
class: "temperature"
state_class: "measurement"
uom: "C"
scale: 0.01
rule: 1
registers: [0x005A]
icon: 'mdi:thermometer'

[hex218]

Thanks! How did you find your inverter ip? My router won't show a new device - even though I'll get updates in solarman?!

[hburkert]

"Nearby" connect to your Deye-Inverter using WiFi accesspoint APnnnnnnn. After connection enter address 10.10.100.1 in your browser.
Quickset shows IP settings.

or analyze your network traffic with wireshark and search for connections 47.254.74.158 / access1.solarmanpv.com

[hburkert]

sorry, mistake: inverter address is 10.10.100.254 not 10.10.100.1

[hex218]

Thank you so much! Got it running now.
I didn't recognize it in my DHCP because it was named "PC-192-168-[...]" and I have a few devices like that (strangely).