-
Notifications
You must be signed in to change notification settings - Fork 201
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Sensor states Unknown after 4 days uptime #576
Comments
I recommend Solarman 1.4.3. |
Please enable debug logging and attach same. Add the following to
|
Still running the version v1.5.1, this is the log output, the update interval was set to 15s: Log output
If relevant, the logger is using a wifi connection, but the signal is strong.
Based on this suggestion, I have changed the config to use 30s interval, I am testing now if it will help. |
I have the very same issue. @markogresak did changing the update interval fix it? |
No, I am experiencing the same problems with longer interval. I am now testing with reinstalled version, first trying the latest (main), if that does not work, I will switch to 1.4.3. |
home-assistant_solarman_2024-05-28T20-38-17.572Z.log please can you check my log, I just tried to setup the solarman for my inverter 16kw but no data showing |
Update: None of the version I've tried helped, and the change to 30s interval did not fix it. I've mentioned the problem to my PV system installer. He saw the brief disconnection problem with other loggers as well, even when logging to the Solarman online service with an interval of 5 minutes. This leads me to believe there's a general networking problem with the wifi logger. I've explored the option to use Modebus, but then found the option to have a Solarman Stick Logger with ethernet connection. Unfortunately, after installing it, I've learned it does not work with this plugin, the connection is timing out. It's a problem with pysolarmanv5 module, reported under issue jmccrohan/pysolarmanv5#22. I have switched to https://github.com/kellerza/sunsynk. The solarman driver (pysolarmanv5) will not work, I've configured the connection with pymodbus driver and it's working will with an uptime of over 1 week so far. I am closing this issue as it appears to be unrelated with this integration or pysolarmanv5 module, there's a networking problem with wifi logger stick itself. |
My correction is working correctly, but after around 4 days of uptime, all sensors go to Unknown, even though
Status_connection
is still Connected. When I restart Home Assistant, the state is correct again.I am using v1.5.1 with definition deye_sg04lp3.yaml.
I did not find anything useful in the logs.
Can this be fixed, or is there at least a workaround?
The text was updated successfully, but these errors were encountered: