[WIP] Kamal setup

.kamal/hooks/docker-setup.sample

@@ -0,0 +1,13 @@
+#!/usr/bin/env ruby
+
+# A sample docker-setup hook
+#
+# Sets up a Docker network on defined hosts which can then be used by the application’s containers
+
+hosts = ENV["KAMAL_HOSTS"].split(",")
+
+hosts.each do |ip|
+  destination = "root@#{ip}"
+  puts "Creating a Docker network \"kamal\" on #{destination}"
+  `ssh #{destination} docker network create kamal`
+end

.kamal/hooks/post-deploy.sample

@@ -0,0 +1,14 @@
+#!/bin/sh
+
+# A sample post-deploy hook
+#
+# These environment variables are available:
+# KAMAL_RECORDED_AT
+# KAMAL_PERFORMER
+# KAMAL_VERSION
+# KAMAL_HOSTS
+# KAMAL_ROLE (if set)
+# KAMAL_DESTINATION (if set)
+# KAMAL_RUNTIME
+
+echo "$KAMAL_PERFORMER deployed $KAMAL_VERSION to $KAMAL_DESTINATION in $KAMAL_RUNTIME seconds"

.kamal/hooks/post-traefik-reboot.sample

@@ -0,0 +1,3 @@
+#!/bin/sh
+
+echo "Rebooted Traefik on $KAMAL_HOSTS"

.kamal/hooks/pre-build.sample

@@ -0,0 +1,51 @@
+#!/bin/sh
+
+# A sample pre-build hook
+#
+# Checks:
+# 1. We have a clean checkout
+# 2. A remote is configured
+# 3. The branch has been pushed to the remote
+# 4. The version we are deploying matches the remote
+#
+# These environment variables are available:
+# KAMAL_RECORDED_AT
+# KAMAL_PERFORMER
+# KAMAL_VERSION
+# KAMAL_HOSTS
+# KAMAL_ROLE (if set)
+# KAMAL_DESTINATION (if set)
+
+if [ -n "$(git status --porcelain)" ]; then
+  echo "Git checkout is not clean, aborting..." >&2
+  git status --porcelain >&2
+  exit 1
+fi
+
+first_remote=$(git remote)
+
+if [ -z "$first_remote" ]; then
+  echo "No git remote set, aborting..." >&2
+  exit 1
+fi
+
+current_branch=$(git branch --show-current)
+
+if [ -z "$current_branch" ]; then
+  echo "Not on a git branch, aborting..." >&2
+  exit 1
+fi
+
+remote_head=$(git ls-remote $first_remote --tags $current_branch | cut -f1)
+
+if [ -z "$remote_head" ]; then
+  echo "Branch not pushed to remote, aborting..." >&2
+  exit 1
+fi
+
+if [ "$KAMAL_VERSION" != "$remote_head" ]; then
+  echo "Version ($KAMAL_VERSION) does not match remote HEAD ($remote_head), aborting..." >&2
+  exit 1
+fi
+
+exit 0

.kamal/hooks/pre-connect.sample

@@ -0,0 +1,47 @@
+#!/usr/bin/env ruby
+
+# A sample pre-connect check
+#
+# Warms DNS before connecting to hosts in parallel
+#
+# These environment variables are available:
+# KAMAL_RECORDED_AT
+# KAMAL_PERFORMER
+# KAMAL_VERSION
+# KAMAL_HOSTS
+# KAMAL_ROLE (if set)
+# KAMAL_DESTINATION (if set)
+# KAMAL_RUNTIME
+
+hosts = ENV["KAMAL_HOSTS"].split(",")
+results = nil
+max = 3
+
+elapsed = Benchmark.realtime do
+  results = hosts.map do |host|
+    Thread.new do
+      tries = 1
+
+      begin
+        Socket.getaddrinfo(host, 0, Socket::AF_UNSPEC, Socket::SOCK_STREAM, nil, Socket::AI_CANONNAME)
+      rescue SocketError
+        if tries < max
+          puts "Retrying DNS warmup: #{host}"
+          tries += 1
+          sleep rand
+          retry
+        else
+          puts "DNS warmup failed: #{host}"
+          host
+        end
+      end
+
+      tries
+    end
+  end.map(&:value)
+end
+
+retries = results.sum - hosts.size
+nopes = results.count { |r| r == max }
+
+puts "Prewarmed %d DNS lookups in %.2f sec: %d retries, %d failures" % [ hosts.size, elapsed, retries, nopes ]

.kamal/hooks/pre-deploy.sample

@@ -0,0 +1,109 @@
+#!/usr/bin/env ruby
+
+# A sample pre-deploy hook
+#
+# Checks the Github status of the build, waiting for a pending build to complete for up to 720 seconds.
+#
+# Fails unless the combined status is "success"
+#
+# These environment variables are available:
+# KAMAL_RECORDED_AT
+# KAMAL_PERFORMER
+# KAMAL_VERSION
+# KAMAL_HOSTS
+# KAMAL_COMMAND
+# KAMAL_SUBCOMMAND
+# KAMAL_ROLE (if set)
+# KAMAL_DESTINATION (if set)
+
+# Only check the build status for production deployments
+if ENV["KAMAL_COMMAND"] == "rollback" || ENV["KAMAL_DESTINATION"] != "production"
+  exit 0
+end
+
+require "bundler/inline"
+
+# true = install gems so this is fast on repeat invocations
+gemfile(true, quiet: true) do
+  source "https://rubygems.org"
+
+  gem "octokit"
+  gem "faraday-retry"
+end
+
+MAX_ATTEMPTS = 72
+ATTEMPTS_GAP = 10
+
+def exit_with_error(message)
+  $stderr.puts message
+  exit 1
+end
+
+class GithubStatusChecks
+  attr_reader :remote_url, :git_sha, :github_client, :combined_status
+
+  def initialize
+    @remote_url = `git config --get remote.origin.url`.strip.delete_prefix("https://github.com/")
+    @git_sha = `git rev-parse HEAD`.strip
+    @github_client = Octokit::Client.new(access_token: ENV["GITHUB_TOKEN"])
+    refresh!
+  end
+
+  def refresh!
+    @combined_status = github_client.combined_status(remote_url, git_sha)
+  end
+
+  def state
+    combined_status[:state]
+  end
+
+  def first_status_url
+    first_status = combined_status[:statuses].find { |status| status[:state] == state }
+    first_status && first_status[:target_url]
+  end
+
+  def complete_count
+    combined_status[:statuses].count { |status| status[:state] != "pending"}
+  end
+
+  def total_count
+    combined_status[:statuses].count
+  end
+
+  def current_status
+    if total_count > 0
+      "Completed #{complete_count}/#{total_count} checks, see #{first_status_url} ..."
+    else
+      "Build not started..."
+    end
+  end
+end
+
+
+$stdout.sync = true
+
+puts "Checking build status..."
+attempts = 0
+checks = GithubStatusChecks.new
+
+begin
+  loop do
+    case checks.state
+    when "success"
+      puts "Checks passed, see #{checks.first_status_url}"
+      exit 0
+    when "failure"
+      exit_with_error "Checks failed, see #{checks.first_status_url}"
+    when "pending"
+      attempts += 1
+    end
+
+    exit_with_error "Checks are still pending, gave up after #{MAX_ATTEMPTS * ATTEMPTS_GAP} seconds" if attempts == MAX_ATTEMPTS
+
+    puts checks.current_status
+    sleep(ATTEMPTS_GAP)
+    checks.refresh!
+  end
+rescue Octokit::NotFound
+  exit_with_error "Build status could not be found"
+end

.kamal/hooks/pre-traefik-reboot.sample

@@ -0,0 +1,3 @@
+#!/bin/sh
+
+echo "Rebooting Traefik on $KAMAL_HOSTS..."

config/credentials.yml.enc

@@ -1 +1 @@
-BZ7hJ1Q/E6O5OSrGEVEqVzH7xhDQ6/unNX6tY6eYmTCo+K8kymS70b/1fHFaZiYLbWqx4tc/73L0irvjg6W0wB5B+a8SCgvjo2wP1VqfFEeBNlPJI82ZJdBFkz30dsBgf1gw6Rraj3Ze4e/IcMJQo8UP8I5x+Ps2IPrEYGlhUHi8cBR8R11qIxHHattpfxqQ7M89C8l+hsjf793ZyLnt9TmFZdxWbxnBDdZHhYSpmJTVV34mFDP9qZ7hPYTGXzGqhpszIP+6l59pmTpyBO/Pq21eX7MpQi+XwZCCxTGAq5ih0TgiBwf9IAhiTgZ7/96vVYrcU+7h4KMnJk19hwl3NHXuaWo6uET3F8Munc/qTz/ShXxCX3zX2g57fyPkf6pzXA6QXGzf8flemmesGUjYJbKZX1VZ--tlJOD/9KN6MF1juj--IdnvUnXcOke5Wp5YlKghwg==
+irbDWudk4jCs1xkxpK/cNdd9UHkVP+Sk8XlMLXiFl4636ZMZQlGRIJLRcK7OS12gjeCDkS6Ac9/z0IwTyzT1yYp0Hdd8bDgwDS/0gK/2/kGjfAfz1fRaYc+KbMRMIERxpgdL4wceMxAaW2XvpM+POUzPIaJDFj5l5t1iLoEYbBhPI6AHLyxhivSKnmixowiA4gerDgTkXQ==--+44A5a8oAobbmQDx--E4wpoVDDrY0JE13R3AV2Gw==

config/deploy.yml

@@ -0,0 +1,101 @@
+# Name of your application. Used to uniquely configure containers.
+service: rails-world
+
+# Name of the container image.
+image: sergeaf/rails-world
+
+# Deploy to these servers.
+servers:
+  - 165.227.38.160
+
+# To persist sqlite data, we need to mount a volume.
+volumes:
+  - storage:/rails/storage
+
+# Credentials for your image host.
+registry:
+  username: sergeaf
+  password:
+    - KAMAL_REGISTRY_PASSWORD
+
+# Inject ENV variables into containers (secrets come from .env).
+# Remember to run `kamal env push` after making changes!
+env:
+  clear:
+    RAILS_ENV: production
+  secret:
+    - RAILS_MASTER_KEY
+
+# Use a different ssh user than root
+# ssh:
+#   user: app
+
+# Configure builder setup.
+# builder:
+#   args:
+#     RUBY_VERSION: 3.2.0
+#   secrets:
+#     - GITHUB_TOKEN
+#   remote:
+#     arch: amd64
+#     host: ssh://app@192.168.0.1
+
+# Use accessory services (secrets come from .env).
+# accessories:
+#   db:
+#     image: mysql:8.0
+#     host: 192.168.0.2
+#     port: 3306
+#     env:
+#       clear:
+#         MYSQL_ROOT_HOST: '%'
+#       secret:
+#         - MYSQL_ROOT_PASSWORD
+#     files:
+#       - config/mysql/production.cnf:/etc/mysql/my.cnf
+#       - db/production.sql:/docker-entrypoint-initdb.d/setup.sql
+#     directories:
+#       - data:/var/lib/mysql
+#   redis:
+#     image: redis:7.0
+#     host: 192.168.0.2
+#     port: 6379
+#     directories:
+#       - data:/data
+
+# Configure custom arguments for Traefik. Be sure to reboot traefik when you modify it.
+# traefik:
+#   args:
+#     accesslog: true
+#     accesslog.format: json
+
+# Configure a custom healthcheck (default is /up on port 3000)
+# healthcheck:
+#   path: /healthz
+#   port: 4000
+
+# Bridge fingerprinted assets, like JS and CSS, between versions to avoid
+# hitting 404 on in-flight requests. Combines all files from new and old
+# version inside the asset_path.
+#
+# If your app is using the Sprockets gem, ensure it sets `config.assets.manifest`.
+# See https://github.com/basecamp/kamal/issues/626 for details
+#
+# asset_path: /rails/public/assets
+
+# Configure rolling deploys by setting a wait time between batches of restarts.
+# boot:
+#   limit: 10 # Can also specify as a percentage of total hosts, such as "25%"
+#   wait: 2
+
+# Configure the role used to determine the primary_host. This host takes
+# deploy locks, runs health checks during the deploy, and follow logs, etc.
+#
+# Caution: there's no support for role renaming yet, so be careful to cleanup
+#          the previous role on the deployed hosts.
+# primary_role: web
+
+# Controls if we abort when see a role with no hosts. Disabling this may be
+# useful for more complex deploy configurations.
+#
+# allow_empty_roles: false