Skip to content

Latest commit

 

History

History
13 lines (11 loc) · 479 Bytes

GettingStarted.md

File metadata and controls

13 lines (11 loc) · 479 Bytes
Raw

Getting Started

Basic Operation

  1. Turn on the vent switch. You will hear the vent and see the vent tube vibrating.
  2. Make sure the chiller is on.
  3. Make sure the compressor is on (both the actual compressor unit and the toggle switch on the laser cutter for it).
  4. Make sure the capacitive probe is connected.
  5. Make sure the emergency stop button is disengaged.
  6. Turn on the laser cutter.
  7. Open LightBurn.
  8. Do a test cut of something small.
  9. Cut your design.