miniRGBii Rev 1.1

Changelog:
v1.1:

• Changed footprint sizes for C84, C64, C69 tantalum capacitors
• Shrunk overall board size due to above change
• Changed silkscreen link on the rear of the board to a dynamic short URL for easier updating without the need for new revisions
• Added the TAPR Open Hardware License

Fabrication outputs are now available in the /outputs folder on the master branch, as well as attached in this release.

The following files are available:

• miniRGBii_gerber.zip: compressed contents of the /outputs/gerber folder, ready for upload for fabrication
• miniRGBii_BOM.csv/xml: generic bill of materials for the components of the board
• miniRGBii-top-pos-CPL.csv: generic pick-and-place file for SMD assembly of the top board side

The following PCB-fab specific files are also available:

• JLCPCB:
  • miniRGBii_BOM_JLC.csv/xml: bill of materials for the components of the board with JLCPCB/LCSC-specific product codes
  • miniRGBii-top-pos-CPL_JLC.csv: Pick-and-place file for SMD assembly of the top board side with JLCPCB's header names
  • Note: By default JLC may flip the big capacitors around, make sure they're facing the right way (positive is facing towards the left hand side of the board)

You may contribute other PCB-fab specific files by opening a Pull Request
For any questions or discrepancies, you may open an Issue or contact us on the Discord server linked in the README

miniRGBii Rev 1.0

Initial Release of miniRGBii, should be functional