FIx Users-Manual

Wiznet · Aug 1, 2023 · 25bf605 · 25bf605
1 parent d0c2356
commit 25bf605
Show file tree

Hide file tree

Showing 8 changed files with 98 additions and 77 deletions.
diff --git a/docs/Product/S2E-Module/WIZ510SSL/Configuration-Tool-Manual-EN.md b/docs/Product/S2E-Module/WIZ510SSL/Configuration-Tool-Manual-EN.md
@@ -316,6 +316,7 @@ section are available below.
 
 
 
+:::info
 **Please take caution of the following when using Trigger code.**
 
 1.  It can only be recognized as switch code if there is a time gap of
@@ -328,7 +329,7 @@ section are available below.
 4.  The default interval of the time gap before and after the command
     mode switch code is 500ms. The operation is based on the timer value
     of the serial data packaging option.
-
+:::
 
 
 #### 5\) Connection password (TCP server mode only)

diff --git a/docs/Product/S2E-Module/WIZ5xxSR-RP-Series/configuration-tool-manual-en.md b/docs/Product/S2E-Module/WIZ5xxSR-RP-Series/configuration-tool-manual-en.md
@@ -321,6 +321,7 @@ The configuration tool is composed of four sections. Details of each section are
         - Default: \[2B\]\[2B\]\[2B\] (+++)
     - Each byte value reads hex code only.
 
+:::info
 **Please take caution of the following when using Trigger code.**
 
 1. It can only be recognized as switch code if there is a time gap of at least 500ms of no data communication time before and after the 3-byte command mode switch.
@@ -330,7 +331,7 @@ The configuration tool is composed of four sections. Details of each section are
 3. Do not end the command mode switch code with CR((CR: Carriage return, ('\\r', 0x0D) )) or LF((LF: Line feed, ('\\n', 0x0A) )).
 
 4. The default interval of the time gap before and after the command mode switch code is 500ms. The operation is based on the timer value of the serial data packaging option.
-
+:::
 
 
 #### 5\) Connection password (TCP server mode only)

diff --git a/docs/Product/S2E-Module/WIZ750SR/Configuration-Tool-Manual-EN.md b/docs/Product/S2E-Module/WIZ750SR/Configuration-Tool-Manual-EN.md
@@ -21,17 +21,17 @@ opened.
 
 |                                                                     |
 | ------------------------------------------------------------------- |
-| ![](/img/products/wiz750sr/usermanual/configtool_overview.png)          |
+| ![](/img/products/wiz750sr/usermanual/configtool_overview.png)      |
 | Figure: **Configuration Tool for WIZ750SR & WIZ107/108SR Products** |
 
 -----
 
 ## Configuration Tool Layout
 
-|                                                          |
-| -------------------------------------------------------- |
+|                                                              |
+| ------------------------------------------------------------ |
 | ![](/img/products/wiz750sr/usermanual/configtool_layout.png) |
-| Figure: **Configuration Tool Layout**                    |
+| Figure: **Configuration Tool Layout**                        |
 
 The configuration tool is composed of four sections. Details of each
 section are available below.
@@ -60,10 +60,10 @@ section are available below.
 
 ### 1\. Icon Menu
 
-|                                                             |
-| ----------------------------------------------------------- |
+|                                                                 |
+| --------------------------------------------------------------- |
 | ![](/img/products/wiz750sr/usermanual/configtool_icon_menu.png) |
-| Figure: **Menu Icons**                                      |
+| Figure: **Menu Icons**                                          |
 
 1.  Program is operated in Windows only.
 
@@ -114,10 +114,10 @@ section are available below.
   - The following pop-up will appear once the firmware upload is
     complete.
 
-|                                                                          |
-| ------------------------------------------------------------------------ |
+|                                                                              |
+| ---------------------------------------------------------------------------- |
 | ![](/img/products/wiz750sr/usermanual/configtool_firmwareupload_success.png) |
-| Figure: **Popup Message - Firmware Upload Successfully**                 |
+| Figure: **Popup Message - Firmware Upload Successfully**                     |
 
   - Use **TCP/UDP port 50002 to upload firmware** on to WIZ750SR.
     Firmware upload can be unsuccessful due to firewall or virus
@@ -154,10 +154,10 @@ DURING FIRMWARE UPLOADING**
   - If the module and PC can communicate via same network, the following
     ping reply will appear.
 
-|                                                                |
-| -------------------------------------------------------------- |
+|                                                                    |
+| ------------------------------------------------------------------ |
 | ![](/img/products/wiz750sr/usermanual/configtool_ping_success.png) |
-| Figure: **Ping Request and Reply**                             |
+| Figure: **Ping Request and Reply**                                 |
 
 #### 7\) Firewall
 
@@ -173,10 +173,10 @@ DURING FIRMWARE UPLOADING**
 
 ### 2\. Device List
 
-|                                                               |
-| ------------------------------------------------------------- |
+|                                                                   |
+| ----------------------------------------------------------------- |
 | ![](/img/products/wiz750sr/usermanual/configtool_device_list.png) |
-| Figure: **Device List**                                       |
+| Figure: **Device List**                                           |
 
   - List of devices searched will appears.
       - Each device will be listed accordingly to each MAC addresses.
@@ -239,10 +239,10 @@ The serial debug message is printed via separate Debug UART and not Data UART, a
 
     ### 3\. Network Configuration Tab
 
-|                                                               |
-| ------------------------------------------------------------- |
+|                                                                   |
+| ----------------------------------------------------------------- |
 | ![](/img/products/wiz750sr/usermanual/configtool_tab_network.png) |
-| Figure: **Network Configuration Tab**                         |
+| Figure: **Network Configuration Tab**                             |
 
 #### 1\) IP Address Allocation
 
@@ -291,10 +291,10 @@ The serial debug message is printed via separate Debug UART and not Data UART, a
 
 ### 4\. Serial Configuration Tab
 
-|                                                              |
-| ------------------------------------------------------------ |
+|                                                                  |
+| ---------------------------------------------------------------- |
 | ![](/img/products/wiz750sr/usermanual/configtool_tab_serial.png) |
-| Figure: **Serial Configuration Tab**                         |
+| Figure: **Serial Configuration Tab**                             |
 
 #### 1\) Debug Message Enable
 
@@ -404,6 +404,7 @@ multi-selected but has priority as shown below.
 1.  Serial data can be collected according to the setting (character,
     size, or time) and be sent together.
 
+:::info
     **Please take caution of the following when using Trigger code.**
 
 1.  It can only be recognized as switch code if there is a time gap of
@@ -417,16 +418,16 @@ multi-selected but has priority as shown below.
     mode switch code is 500ms. The operation is based on the timer value
     of the serial data packaging option.
 
-
+:::
 
 -----
 
 ### 5\. Options Configuration Tab
 
-|                                                               |
-| ------------------------------------------------------------- |
+|                                                                   |
+| ----------------------------------------------------------------- |
 | ![](/img/products/wiz750sr/usermanual/configtool_tab_options.png) |
-| Figure: **Options Configuration Tab**                         |
+| Figure: **Options Configuration Tab**                             |
 
 #### 1\) Inactivity Timer Settings
 
@@ -518,9 +519,9 @@ multi-selected but has priority as shown below.
 ### 6\. Progress Bar
 
 | Device Search             | ![](/img/products/wiz750sr/usermanual/configtool_operation_results.png) |
-| ------------------------- | ------------------------------------------------------------------- |
+| ------------------------- | ----------------------------------------------------------------------- |
 | Firmware Upload           | ![](/img/products/wiz750sr/usermanual/configtool_progress_bar.png)      |
-| Figures: **Progress Bar** |                                                                     |
+| Figures: **Progress Bar** |                                                                         |
 
   - Shows the result of search.
       - MAC addresses will be shown together if multiple devices are

diff --git a/docs/Product/S2E-Module/WIZ750SR/Configuration-Tool-Manual-KO.md b/docs/Product/S2E-Module/WIZ750SR/Configuration-Tool-Manual-KO.md
@@ -20,17 +20,17 @@ date: 2020-04-08
 
 |                                                                     |
 | ------------------------------------------------------------------- |
-| ![](/img/products/wiz750sr/usermanual/configtool_overview.png)          |
+| ![](/img/products/wiz750sr/usermanual/configtool_overview.png)      |
 | Figure: **Configuration Tool for WIZ750SR & WIZ107/108SR Products** |
 
 -----
 
 ## Configuration Tool Layout
 
-|                                                          |
-| -------------------------------------------------------- |
+|                                                              |
+| ------------------------------------------------------------ |
 | ![](/img/products/wiz750sr/usermanual/configtool_layout.png) |
-| Figure: **Configuration Tool Layout**                    |
+| Figure: **Configuration Tool Layout**                        |
 
 설정 프로그램은 크게 네 부분으로 구성되어 있습니다. 각 부분 상세 설명은 제목 링크를 통해 확인 할 수 있습니다.
 
@@ -60,10 +60,10 @@ date: 2020-04-08
 Configuration tool 상단에 위치하며, 제품의 검색 / 펌웨어 업로드 / 재시작 / 초기화 등을 수행 할 수
 있습니다.
 
-|                                                             |
-| ----------------------------------------------------------- |
+|                                                                 |
+| --------------------------------------------------------------- |
 | ![](/img/products/wiz750sr/usermanual/configtool_icon_menu.png) |
-| Figure: **Menu Icons**                                      |
+| Figure: **Menu Icons**                                          |
 
 1.  Windows용 프로그램을 제공합니다.
 
@@ -111,10 +111,10 @@ Configuration tool 상단에 위치하며, 제품의 검색 / 펌웨어 업로
   - 제품은 동작이 완료된 이후 자동으로 재시작(Reboot) 됩니다. 
   - 성공적으로 펌웨어 업로드 완료 시, 다음과 같은 메시지 팝업을 확인 할 수 있습니다.
 
-|                                                                          |
-| ------------------------------------------------------------------------ |
+|                                                                              |
+| ---------------------------------------------------------------------------- |
 | ![](/img/products/wiz750sr/usermanual/configtool_firmwareupload_success.png) |
-| Figure: **Popup Message - Firmware Upload Successfully**                 |
+| Figure: **Popup Message - Firmware Upload Successfully**                     |
 
   - **네트워크를 이용한 WIZ750SR 장치 펌웨어 업로드 기능은 TCP 포트 50002번을 이용**합니다. 만약 방화벽이나
     백신 프로그램에서 해당 포트를 차단하고 있을 경우, 장치 펌웨어 업로드에 실패할 수 있습니다.
@@ -150,10 +150,10 @@ Configuration tool 상단에 위치하며, 제품의 검색 / 펌웨어 업로
   - 제품이 PC와 동일 망에 위치하여 **통신이 가능한 경우**, 다음과 같이 Ping 응답(Ping reply)을 확인 할
     수 있습니다.
 
-|                                                                |
-| -------------------------------------------------------------- |
+|                                                                    |
+| ------------------------------------------------------------------ |
 | ![](/img/products/wiz750sr/usermanual/configtool_ping_success.png) |
-| Figure: **Ping Request and Reply**                             |
+| Figure: **Ping Request and Reply**                                 |
 
 #### 7\) Firewall
 
@@ -169,10 +169,10 @@ Configuration tool 상단에 위치하며, 제품의 검색 / 펌웨어 업로
 
 ### 2\. Device List
 
-|                                                               |
-| ------------------------------------------------------------- |
+|                                                                   |
+| ----------------------------------------------------------------- |
 | ![](/img/products/wiz750sr/usermanual/configtool_device_list.png) |
-| Figure: **Device List**                                       |
+| Figure: **Device List**                                           |
 
   - Search 기능을 통해 검색된 장치의 리스트가 표시됩니다.
       - 각각의 WIZ750SR 제품은 MAC 주소로 구분되어 표시됩니다.
@@ -234,10 +234,10 @@ WIZ750SR의 버전은 <strong>Major</strong> version number . <strong>Minor</str
 
 ### 3\. Network Configuration Tab
 
-|                                                               |
-| ------------------------------------------------------------- |
+|                                                                   |
+| ----------------------------------------------------------------- |
 | ![](/img/products/wiz750sr/usermanual/configtool_tab_network.png) |
-| Figure: **Network Configuration Tab**                         |
+| Figure: **Network Configuration Tab**                             |
 
 #### 1\) IP 주소 할당 방법
 
@@ -280,10 +280,10 @@ WIZ750SR의 버전은 <strong>Major</strong> version number . <strong>Minor</str
 
 ### 4\. Serial Configuration Tab
 
-|                                                              |
-| ------------------------------------------------------------ |
+|                                                                  |
+| ---------------------------------------------------------------- |
 | ![](/img/products/wiz750sr/usermanual/configtool_tab_serial.png) |
-| Figure: **Serial Configuration Tab**                         |
+| Figure: **Serial Configuration Tab**                             |
 
 #### 1\) 디버그 메시지 허용 설정
 
@@ -386,23 +386,25 @@ WIZ750SR의 버전은 <strong>Major</strong> version number . <strong>Minor</str
 
 
 
+:::info
 **Trigger code를 이용한 모드 전환 시 주의점**은 다음과 같습니다.
 
 
   - 3-byte 커맨드 모드 전환 코드 입력의 전/후로 **500ms 이상**의 데이터 전송 없는 시간 간격(Time gap)이 있어야 전환 코드로 인식합니다.
   - 3-byte 커맨드 모드 전환 코드의 각 byte 간 사이의 입력 시간 간격이 **500ms 이하**여야 합니다.
   - 커맨드 모드 전환 코드의 말미에는 CR((CR: Carriage return, 커서를 맨 왼쪽 시작 위치로 이동 ('\r', 0x0D) ))과 LF((LF: Line feed, 커서를 한 칸 아래로 이동하여 새 줄 추가 ('\n', 0x0A) ))를 붙이지 않습니다.((이와 반대로, 모드 전환 후 입력 될 시리얼 커맨드의 경우에는 각 커맨드의 마지막에 CR과 LF를 붙여야 합니다.))
   - 커맨드 모드 전환 코드 전, 후 간격과 사이 간격의 **초기 값은 500ms**이며, 시리얼 데이터 패킹 옵션의 **Timer** 값이 설정된 경우 간격 값은 설정된 Timer 값으로 변경됩니다.
+:::
 
 
 -----
 
 ### 5\. Options Configuration Tab
 
-|                                                               |
-| ------------------------------------------------------------- |
+|                                                                   |
+| ----------------------------------------------------------------- |
 | ![](/img/products/wiz750sr/usermanual/configtool_tab_options.png) |
-| Figure: **Options Configuration Tab**                         |
+| Figure: **Options Configuration Tab**                             |
 
 #### 1\) 비활성 타이머 설정
 
@@ -485,9 +487,9 @@ WIZ750SR의 버전은 <strong>Major</strong> version number . <strong>Minor</str
 ### 6\. Progress Bar
 
 | Device Search             | ![](/img/products/wiz750sr/usermanual/configtool_operation_results.png) |
-| ------------------------- | ------------------------------------------------------------------- |
+| ------------------------- | ----------------------------------------------------------------------- |
 | Firmware Upload           | ![](/img/products/wiz750sr/usermanual/configtool_progress_bar.png)      |
-| Figures: **Progress Bar** |                                                                     |
+| Figures: **Progress Bar** |                                                                         |
 
   - 검색 동작의 결과를 표시합니다.
       - 이 때, 장치가 다수 일 경우 사용자가 선택한 장치의 MAC 주소를 함께 표시합니다.

diff --git a/docs/Product/S2E-Module/WIZ750SR/Configuration-Tool-Manual-New-EN.md b/docs/Product/S2E-Module/WIZ750SR/Configuration-Tool-Manual-New-EN.md
@@ -330,6 +330,7 @@ DURING FIRMWARE UPLOADING**
 
 
 
+:::info
 **Please take caution of the following when using Trigger code.**
 
 1.  It can only be recognized as switch code if there is a time gap of
@@ -343,7 +344,7 @@ DURING FIRMWARE UPLOADING**
     mode switch code is 500ms. The operation is based on the timer value
     of the serial data packaging option.
 
-
+:::
 
 #### 5\) Connection password (TCP server mode only)
 

diff --git a/docs/Product/S2E-Module/WIZ750SR/Configuration-Tool-Manual-New-KO.md b/docs/Product/S2E-Module/WIZ750SR/Configuration-Tool-Manual-New-KO.md
@@ -304,12 +304,14 @@ Configuration tool 상단에 위치하며, 제품의 검색 / 펌웨어 업로
           - Default: \[2B\]\[2B\]\[2B\] (+++)
       - 각 byte의 값은 hex 코드만 인식합니다.
 
+:::info
 **Trigger code를 이용한 모드 전환 시 주의점**은 다음과 같습니다.
 
   - 3-byte 커맨드 모드 전환 코드 입력의 전/후로 **500ms 이상**의 데이터 전송 없는 시간 간격(Time gap)이 있어야 전환 코드로 인식합니다.
   - 3-byte 커맨드 모드 전환 코드의 각 byte 간 사이의 입력 시간 간격이 **500ms 이하**여야 합니다.
   - 커맨드 모드 전환 코드의 말미에는 CR((CR: Carriage return, 커서를 맨 왼쪽 시작 위치로 이동 ('\r', 0x0D) ))과 LF((LF: Line feed, 커서를 한 칸 아래로 이동하여 새 줄 추가 ('\n', 0x0A) ))를 붙이지 않습니다.((이와 반대로, 모드 전환 후 입력 될 시리얼 커맨드의 경우에는 각 커맨드의 마지막에 CR과 LF를 붙여야 합니다.))
   - 커맨드 모드 전환 코드 전, 후 간격과 사이 간격의 **초기 값은 500ms**이며, 시리얼 데이터 패킹 옵션의 **Timer** 값이 설정된 경우 간격 값은 설정된 Timer 값으로 변경됩니다.
+:::
 
 #### 5) Connection password (TCP server mode only)
 

diff --git a/docs/Product/S2E-Module/WIZ750SR/Users-Manual-EN.md b/docs/Product/S2E-Module/WIZ750SR/Users-Manual-EN.md
@@ -107,7 +107,7 @@ Default Remote host settings of WIZ750SR
 
 4.  In UDP 1:1 mode, data sent from an unspecified remote host are all discarded
 
-    ## Network Operation Mode
+## Network Operation Mode
 
 WIZ750SR supports four kinds of operation modes based on the network; **TCP server mode, TCP client mode, TCP server/client mixed mode, and UDP mode**. Users can select the network operation mode according to the feature and purpose of the serial device. Each operation modes are explained in detail below.
 
@@ -285,14 +285,16 @@ Flow control disabled</td>
   - The existing TCP connection will be lost if the mode changes to serial command mode.
   - Each byte value reads hex code only.
 
+:::info
 **Please take caution of the following when using Trigger code.**
 
 1.  It can only be recognized as switch code if there is a time gap of at least 500ms of no data communication time before and after the 3-byte command mode switch.
 2.  The time interval for each byte of the 3-byte command mode switch code has to be at most 500ms.
 3.  Do not end the command mode switch code with CR or LF.
 4.  The default interval of the time gap before and after the command mode switch code is 500ms. The operation is based on the timer value of the serial data packaging option.
 
-1.  The serial command after switching modes must end with CR and LF.
+5.  The serial command after switching modes must end with CR and LF.
+:::
 
 ### Serial Data Packing