mosquitto-auth-plug

This is a plugin to authenticate and authorize Mosquitto users from one of several distinct back-ends:

MySQL
PostgreSQL
CDB
SQLite3 database
Redis key/value store
TLS PSK (the psk back-end is a bit of a shim which piggy-backs onto the other database back-ends)
LDAP
HTTP (custom HTTP API)
JWT
MongoDB
Files

Introduction

This plugin can perform authentication (check username / password) and authorization (ACL). Currently not all back-ends have the same capabilities (the the section on the back-end you're interested in).

Capability	mysql	redis	cdb	sqlite	ldap	psk	postgres	http	jwt	MongoDB	Files
authentication	Y	Y	Y	Y	Y	Y	Y	Y	Y	Y	Y
superusers	Y					3	Y	Y	Y	Y	N
acl checking	Y	1	2	2		3	Y	Y	Y	Y	Y
static superusers	Y	Y	Y	Y		3	Y	Y	Y	Y	Y

Topic wildcards (+/#) are not supported
Currently not implemented; back-end returns TRUE
Dependent on the database used by PSK

Multiple back-ends can be configured simultaneously for authentication, and they're attempted in the order you specify. Once a user has been authenticated, the same back-end is used to check authorization (ACLs). Superusers are checked for in all back-ends. The configuration option is called auth_opt_backends and it takes a comma-separated list of back-end names which are checked in exactly that order.

auth_opt_backends cdb,sqlite,mysql,redis,postgres,http,jwt,mongo

Note: anonymous MQTT connections are assigned a username of configured in the plugin as auth_opt_anonusername and they are handled by a so-called fallback back-end which is the first configured back-end.

Passwords are obtained from the back-end as a PBKDF2 string (see section on Passwords below). Even if you try and store a clear-text password, it simply won't work.

The mysql back-end supports expansion of %c and %u as clientid and username respectively. This allows ACLs in the database to look like this:

+-----------+---------------------------------+----+
| username  | topic                           | rw |
+-----------+---------------------------------+----+
| bridge-01 | $SYS/broker/connection/%c/state |  2 |
+-----------+---------------------------------+----+

The plugin supports so-called superusers. These are usernames exempt from ACL checking. In other words, if a user is a superuser, that user doesn't require ACLs.

A static superuser is one configured with the fnmatch(3) auth_opt_superusers option. The other 'superusers' are configured (i.e. enabled) from within the particular database back-end. Effectively both are identical in that ACL checking is disabled if a user is a superuser.

Note that not all back-ends currently have 'superuser' queries implemented. todo. At that point the auth_opt_superusers will probably disappear.

Building the plugin

In order to compile the plugin you'll require a copy of the Mosquitto source code together with the libraries required for the back-end you want to use in the plugin. OpenSSL is also required.

Copy config.mk.in to config.mk and modify config.mk to suit your building environment, in particular, you have to configure which back-ends you want to provide as well as the path to the Mosquitto source and its library.

After a make you should have a shared object called auth-plug.so which you will reference in your mosquitto.conf.

Note that OpenSSL as shipped with OS X is probably too old. You may wish to use a version supplied by home brew or build your own, and then adapt OPENSSLDIR in config.mk.

Configuration

The plugin is configured in Mosquitto's configuration file (typically mosquitto.conf), and it is loaded into Mosquitto auth the auth_plugin option.

auth_plugin /path/to/auth-plug.so

Options therein with a leading auth_opt_ are handed to the plugin. The following "global" auth_opt_* plugin options exist:

Option	default	Mandatory	Meaning
backends		Y	comma-separated list of back-ends to load
superusers			fnmatch(3) case-sensitive string
log_quiet	false		don't log DEBUG messages

Individual back-ends have their options described in the sections below.

MySQL

The mysql back-end is currently the most feature-complete: it supports obtaining passwords, checking for superusers, and verifying ACLs by configuring up to three distinct SQL queries used to obtain those results.

You configure the SQL queries in order to adapt to whichever schema you currently have.

The following auth_opt_ options are supported by the mysql back-end:

Option	default	Mandatory	Meaning
host	localhost		hostname/address
port	3306		TCP port
user			username
pass			password
dbname		Y	database name
userquery		Y	SQL for users
superquery			SQL for superusers
aclquery			SQL for ACLs
mysql_opt_reconnect	true		enable MYSQL_OPT_RECONNECT option
mysql_auto_connect	true		enable auto_connect function
anonusername	anonymous		username to use for anonymous connections
cacheseconds			Deprecated. Alias for acl_cacheseconds
acl_cacheseconds	300		number of seconds to cache ACL lookups. 0 disables
auth_cacheseconds	0		number of seconds to cache AUTH lookups. 0 disables

The SQL query for looking up a user's password hash is mandatory. The query MUST return a single row only (any other number of rows is considered to be "user not found"), and it MUST return a single column only with the PBKDF2 password hash. A single '%s' in the query string is replaced by the username attempting to access the broker.

SELECT pw FROM users WHERE username = '%s' LIMIT 1

The SQL query for checking whether a user is a superuser - and thus circumventing ACL checks - is optional. If it is specified, the query MUST return a single row with a single value: 0 is false and 1 is true. We recommend using a SELECT IFNULL(COUNT(*),0) FROM ... for this query as it satisfies both conditions. ). A single '%s' in the query string is replaced by the username attempting to access the broker. The following example uses the same users table, but it could just as well reference a distinct table or view.

SELECT IFNULL(COUNT(*), 0) FROM users WHERE username = '%s' AND super = 1

The SQL query for checking ACLs is optional, but if it is specified, the mysql back-end can try to limit access to particular topics or topic branches depending on the value of a database table. The query MAY return zero or more rows for a particular user, each returning EXACTLY one column containing a topic (wildcards are supported). A single '%s' in the query string is replaced by the username attempting to access the broker, and a single '%d' is replaced with the integer value 1 signifying a read-only access attempt (SUB) or 2 signifying a read-write access attempt (PUB).

In the following example, the table has an INT(1) column rw containing 1 for readonly topics, and 2 for read-write topics:

SELECT topic FROM acls WHERE (username = '%s') AND (rw >= %d)

Mosquitto configuration for the mysql back-end:

auth_plugin /home/jpm/mosquitto-auth-plug/auth-plug.so
auth_opt_host localhost
auth_opt_port 3306
auth_opt_dbname test
auth_opt_user jjj
auth_opt_pass supersecret
auth_opt_userquery SELECT pw FROM users WHERE username = '%s'
auth_opt_superquery SELECT COUNT(*) FROM users WHERE username = '%s' AND super = 1
auth_opt_aclquery SELECT topic FROM acls WHERE (username = '%s') AND (rw >= %d)
auth_opt_anonusername AnonymouS

Assuming the following database tables:

mysql> SELECT * FROM users;
+----+----------+---------------------------------------------------------------------+-------+
| id | username | pw                                                                  | super |
+----+----------+---------------------------------------------------------------------+-------+
|  1 | jjolie   | PBKDF2$sha256$901$x8mf3JIFTUFU9C23$Mid2xcgTrKBfBdye6W/4hE3GKeksu00+ |     0 |
|  2 | a        | PBKDF2$sha256$901$XPkOwNbd05p5XsUn$1uPtR6hMKBedWE44nqdVg+2NPKvyGst8 |     0 |
|  3 | su1      | PBKDF2$sha256$901$chEZ4HcSmKtlV0kf$yRh2N62uq6cHoAB6FIrxIN2iihYqNIJp |     1 |
+----+----------+---------------------------------------------------------------------+-------+

mysql> SELECT * FROM acls;
+----+----------+-------------------+----+
| id | username | topic             | rw |
+----+----------+-------------------+----+
|  1 | jjolie   | loc/jjolie        |  1 |
|  2 | jjolie   | $SYS/something    |  1 |
|  3 | a        | loc/test/#        |  1 |
|  4 | a        | $SYS/broker/log/+ |  1 |
|  5 | su1      | mega/secret       |  1 |
|  6 | nop      | mega/secret       |  1 |
+----+----------+-------------------+----+

the above SQL queries would enable the following combinations (note the * at the beginning of the line indicating a superuser)

  jjolie     PBKDF2$sha256$901$x8mf3JIFTUFU9C23$Mid2xcgTrKBfBdye6W/4hE3GKeksu00+
	loc/a                                    DENY
	loc/jjolie                               PERMIT
	mega/secret                              DENY
	loc/test                                 DENY
	$SYS/broker/log/N                        DENY
  nop        <nil>
	loc/a                                    DENY
	loc/jjolie                               DENY
	mega/secret                              PERMIT
	loc/test                                 DENY
	$SYS/broker/log/N                        DENY
  a          PBKDF2$sha256$901$XPkOwNbd05p5XsUn$1uPtR6hMKBedWE44nqdVg+2NPKvyGst8
	loc/a                                    DENY
	loc/jjolie                               DENY
	mega/secret                              DENY
	loc/test                                 PERMIT
	$SYS/broker/log/N                        PERMIT
* su1        PBKDF2$sha256$901$chEZ4HcSmKtlV0kf$yRh2N62uq6cHoAB6FIrxIN2iihYqNIJp
	loc/a                                    PERMIT
	loc/jjolie                               PERMIT
	mega/secret                              PERMIT
	loc/test                                 PERMIT
	$SYS/broker/log/N                        PERMIT

The mysql back-end will re-connect to the MySQL server when the connection has gone away. If you wish, you can disable this by configuring:

auth_opt_mysql_opt_reconnect false
auth_opt_mysql_auto_connect false

LDAP

The LDAP plugin currently does authentication only; authenticated users are allowed to publish/subscribe at will.

The user with which Mosquitto connects to the broker is searched in the LDAP directory via the ldap_uri configuration parameter. This LDAP search MUST return exactly one entry. The user's password is then use with the DN of the entry found to bind to the directory. If that LDAP bind succeeds, the user is authenticated. In other cases, authentication fails.

Option	Mandatory	Meaning
binddn	Y	the DN of an object which may search users
bindpw	Y	its password
ldap_uri	Y	an LDAP uri with filter

Example configuration:

auth_plugin /path/to/auth-plug.so
auth_opt_backends ldap
auth_opt_binddn cn=manager,dc=mens,dc=de
auth_opt_bindpw s3crit
auth_opt_ldap_uri ldap://127.0.0.1/ou=Users,dc=mens,dc=de?cn?sub?(&(objectclass=inetOrgPerson)(uid=@))

CDB

Option	default	Mandatory	Meaning
cdbname		Y	path to .cdb

SQLITE

Option	default	Mandatory	Meaning
dbpath		Y	path to database
sqliteuserquery		Y	SQL for users

Example:

auth_opt_sqliteuserquery SELECT pw FROM users WHERE username = ?

Redis

auth_opt_redis_userquery GET %s
auth_opt_redis_aclquery GET %s-%s

In auth_opt_redis_userquery the parameter is the username, whereas in auth_opt_redis_aclquery, the first parameter is the username and the second is the topic. When using ACLS topic must be an exact match - wildcards are not supported.

If no options are provided then it will default to not using an ACL and using the above userquery.

Option	default	Mandatory	Meaning
redis_host	localhost		hostname / IP address
redis_port	6379		TCP port number

HTTP

The http back-end is for auth by custom HTTP API.

The following auth_opt_ options are supported by the http back-end:

Option	default	Mandatory	Meaning
http_ip		Y	IP address,will skip dns lookup
http_port	80		TCP port number
http_hostname			hostname for HTTP header
http_getuser_uri		Y	URI for check username/password
http_superuser_uri		Y	URI for check superuser
http_aclcheck_uri		Y	URI for check acl
http_with_tls	false	N	Use TLS on connect
http_basic_auth_key		N	Basic Authentication Key
http_retry_count	3	N	Number of retries done if backend is unavailable

If the configured URLs return an HTTP status code == 2xx, the authentication / authorization succeeds. If the status code == 4xx authentication / authorization fails. For status code == 5xx or server unreachable, the HTTP request will be retried up to http_retry_count. If all tries fail and if no other backend succeeded, then an error is returned and client is disconnected.

URI-Param	username	password	clientid	topic	acc
http_getuser_uri	Y	Y	N	N	N
http_superuser_uri	Y	N	N	N	N
http_aclcheck_uri	Y	N	Y	Y	Y

Mosquitto configuration for the http back-end:

auth_opt_backends http
auth_opt_http_ip 127.0.0.1
auth_opt_http_port 8089
#auth_opt_http_hostname example.org
auth_opt_http_getuser_uri /auth
auth_opt_http_superuser_uri /superuser
auth_opt_http_aclcheck_uri /acl

A very simple example service using Python and bottle can be found in examples/http-auth-be.py.

The http plugin can utilize environment variables which are exported before it (i.e. Mosquitto) is started by adding configuration settings like

auth_opt_<interface>_<method>_params <key>=<evn_name>[,<key>=<evn_name>]*

For example, set the following:

export DOMAIN=example.com
export PORT=8080

and add the following settings to mosquitto.conf:

auth_opt_http_getuser_params domain=DOMAIN,port=PORT
auth_opt_http_superuser_params domain=DOMAIN,port=PORT
auth_opt_http_aclcheck_params domain=DOMAIN,port=PORT

JWT

The jwt back-end is for auth by JWT-webtokens. The JWT and HTTP configurations are identical, so please read the http-section above.

The username-field is interpreted as the token-field and passed to the http-server in an Authorization-header.

Authorization: Bearer %token

Note: Some clients require the password-field to be populated. This field is ignored by the JWT-backend, so feel free to input some gibberish.

PostgreSQL

The postgres like mysql back-end is currently the most feature-complete: it supports obtaining passwords, checking for superusers, and verifying ACLs by configuring up to three distinct SQL queries used to obtain those results.

You configure the SQL queries in order to adapt to whichever schema you currently have.

The following auth_opt_ options are supported by the mysql back-end:

Option	default	Mandatory	Meaning
host	localhost		hostname/address
port	5432		TCP port
user			username
pass			password
dbname		Y	database name
userquery		Y	SQL for users
superquery			SQL for superusers
aclquery			SQL for ACLs

The SQL query for looking up a user's password hash is mandatory. The query MUST return a single row only (any other number of rows is considered to be "user not found"), and it MUST return a single column only with the PBKDF2 password hash. A single '$1' in the query string is replaced by the username attempting to access the broker.

SELECT pass FROM account WHERE username = $1 limit 1

The SQL query for checking whether a user is a superuser - and thus circumventing ACL checks - is optional. If it is specified, the query MUST return a single row with a single value: 0 is false and 1 is true. We recommend using a SELECT COALESCE(COUNT(*),0) FROM ... for this query as it satisfies both conditions. ). A single '$1' in the query string is replaced by the username attempting to access the broker. The following example uses the same users table, but it could just as well reference a distinct table or view.

SELECT COALESCE(COUNT(*),0) FROM account WHERE username = $1 AND super = 1

The SQL query for checking ACLs is optional, but if it is specified, the mysql back-end can try to limit access to particular topics or topic branches depending on the value of a database table. The query MAY return zero or more rows for a particular user, each returning EXACTLY one column containing a topic (wildcards are supported). A single '$1' in the query string is replaced by the username attempting to access the broker, and a single '$2' is replaced with the integer value 1 signifying a read-only access attempt (SUB) or 2 signifying a read-write access attempt (PUB).

In the following example, the table has a column rw containing 1 for readonly topics, and 2 for read-write topics:

SELECT topic FROM acl WHERE (username = $1) AND rw >= $2

Mosquitto configuration for the postgres back-end:

auth_plugin /home/jpm/mosquitto-auth-plug/auth-plug.so
auth_opt_host localhost
auth_opt_port 5432
auth_opt_dbname test
auth_opt_user jjj
auth_opt_pass supersecret
auth_opt_userquery SELECT pw FROM account WHERE username = $1 limit 1
auth_opt_superquery SELECT COALESCE(COUNT(*),0) FROM account WHERE username = $1 AND mosquitto_super = 1
auth_opt_aclquery SELECT topic FROM acls WHERE (username = $1) AND (rw & $2) > 0```

Assuming the following database tables:

=> SELECT * FROM account;
+----+----------+---------------------------------------------------------------------+-------+
| id | username | pw                                                                  | super |
+----+----------+---------------------------------------------------------------------+-------+
|  1 | jjolie   | PBKDF2$sha256$901$x8mf3JIFTUFU9C23$Mid2xcgTrKBfBdye6W/4hE3GKeksu00+ |     0 |
|  2 | a        | PBKDF2$sha256$901$XPkOwNbd05p5XsUn$1uPtR6hMKBedWE44nqdVg+2NPKvyGst8 |     0 |
|  3 | su1      | PBKDF2$sha256$901$chEZ4HcSmKtlV0kf$yRh2N62uq6cHoAB6FIrxIN2iihYqNIJp |     1 |
+----+----------+---------------------------------------------------------------------+-------+

=> SELECT * FROM acls;
+----+----------+-------------------+----+
| id | username | topic             | rw |
+----+----------+-------------------+----+
|  1 | jjolie   | loc/jjolie        |  1 |
|  2 | jjolie   | $SYS/something    |  1 |
|  3 | a        | loc/test/#        |  1 |
|  4 | a        | $SYS/broker/log/+ |  1 |
|  5 | su1      | mega/secret       |  1 |
|  6 | nop      | mega/secret       |  1 |
+----+----------+-------------------+----+

the above SQL queries would enable the following combinations (note the * at the beginning of the line indicating a superuser)

  jjolie     PBKDF2$sha256$901$x8mf3JIFTUFU9C23$Mid2xcgTrKBfBdye6W/4hE3GKeksu00+
  loc/a                                    DENY
  loc/jjolie                               PERMIT
  mega/secret                              DENY
  loc/test                                 DENY
  $SYS/broker/log/N                        DENY
  nop        <nil>
  loc/a                                    DENY
  loc/jjolie                               DENY
  mega/secret                              PERMIT
  loc/test                                 DENY
  $SYS/broker/log/N                        DENY
  a          PBKDF2$sha256$901$XPkOwNbd05p5XsUn$1uPtR6hMKBedWE44nqdVg+2NPKvyGst8
  loc/a                                    DENY
  loc/jjolie                               DENY
  mega/secret                              DENY
  loc/test                                 PERMIT
  $SYS/broker/log/N                        PERMIT
* su1        PBKDF2$sha256$901$chEZ4HcSmKtlV0kf$yRh2N62uq6cHoAB6FIrxIN2iihYqNIJp
  loc/a                                    PERMIT
  loc/jjolie                               PERMIT
  mega/secret                              PERMIT
  loc/test                                 PERMIT
  $SYS/broker/log/N                        PERMIT

MongoDB

The mongo back-end works with superuser and ACL checks. Additional build dependencies are https://github.com/mongodb/mongo-c-driver >=1.4.0 and https://github.com/mongodb/libbson >=1.4.0.

You should set up a users collection (required) and a topic lists collection (optional) with the following format:

Users collection

Each user document must have a username, a hashed password, and at least one of:

A superuser prop, allowing full access to all topics
An embedded array or sub-document to use as an ACL (see 'ACL format')
A foreign key pointing to another document containing an ACL (see 'ACL format')

You may use any combination of these options; authorisation will be granted if any check passes.

The user document has the following format (note that the property names are configurable variables, see 'Configuration').

{
    [user_username_prop]: string, // Username as given in the MQTT connect request
    [user_password_prop]: string, // A PBKDF2 hash, see 'Passwords' section
    [user_topiclist_fk_prop]: int | oid | string, // reference to a document in collection_topics)
    [user_topics_prop]: string[] | { [topic: string]: "r"|"w"|"rw" }, // see 'ACL format'
    [user_superuser_prop]: int | boolean // optional, superuser if truthy
}

As an example using default options, a user document with an embedded ACL might look like:

{
    "username": "user1",
    "password": "PBKDF2$sha256$901$8ebTR72Pcmjl3cYq$SCVHHfqn9t6Ev9sE6RMTeF3pawvtGqTu",
    "superuser": false,
    "topics": {
        "public/#": "r",
	"client/user1/#": "rw"
    }
}

Topic lists collection (optional)

If the user document references a separate topics document, that document should exist and must have the format:

{
    [topiclist_key_prop]: int | oid | string, // unique id, as referenced by users[user_topiclist_fk_prop],
    [topiclist_topics_prop]: string[] | { [topic: string]: "r"|"w"|"rw" } // see 'ACL format'
}

This strategy will be especially suitable if you have a complex ACL shared between many users.

ACL format

Topics may be given as either an array of topic strings, eg ["topic1/#", "topic2/+"], in which case all topics will be read-write, or as a sub-document mapping topic names to the strings "r", "w", "rw", eg { "article/#":"r", "article/+/comments":"rw", "ballotbox":"w" }.

Configuration

The following auth_opt_mongo_ options are supported by the mongo back-end:

Option	default	Meaning
uri	mongodb://localhost:27107	MongoDB connection string (database part is ignored)
database	mqGate	Name of the database containing users (and topiclists)
user_coll	users	Collection for user documents
topiclist_coll	topics	Collection for topiclist documents (optional if embedded topics are used)
user_username_prop	username	Username property name in the user document
user_password_prop	password	Password property name in the user document
user_superuser_prop	superuser	Superuser property name in the user document
user_topics_prop	topics	Name of a property on the user document containing an embedded topic list
user_topiclist_fk_prop	topics	Property used as a foreign key to reference a topiclist document
topiclist_key_prop	_id	Unique key in the topiclist document pointed to by user_topiclist_fk_prop
topiclist_topics_prop	topics	Property containing topics within the topiclist document

Mosquitto configuration for the mongo back-end:

auth_plugin /home/jpm/mosquitto-auth-plug/auth-plug.so
auth_opt_mongo_uri mongodb://localhost:27017

Files

The files backend attempts to re-implement the files behavior in vanilla Mosquitto, however the user's password file contains PBKDF2 passwords instead of passwords hashed with the mosquitto-passwd program; you would use our np utility or similar to create the PBKDF2 hashes.

The configuration directives for the Files backend are as follows:

auth_opt_backends files
auth_opt_password_file file.pw
auth_opt_acl_file file.acl

with examples of these files being:

`password_file`

# comment
jpm:PBKDF2$sha256$901$UGfDz79cAaydRsEF$XvYwauPeviFd1NfbGL+dxcn1K7BVfMeW
jane:PBKDF2$sha256$901$wvvH0fe7Ftszt8nR$NZV6XWWg01dCRiPOheVNsgMJDX1mzd2v

`acl_file`

user jane
topic read #

user jpm
topic dd

The syntax for the ACL file is that as described in mosquitto.conf(5).

Passwords

A user's password is stored as a PBKDF2 hash in the back-end. An example "password" is a string with five pieces in it, delimited by $, inspired by this.

PBKDF2$sha256$901$8ebTR72Pcmjl3cYq$SCVHHfqn9t6Ev9sE6RMTeF3pawvtGqTu
--^--- --^--- -^- ------^--------- -------------^------------------
  |      |     |        |                       |
  |      |     |        |                       +-- : hashed password
  |      |     |        +-------------------------- : salt
  |      |     +----------------------------------- : iterations
  |      +----------------------------------------- : hash function
  +------------------------------------------------ : marker

Note that the salt by default will be taken as-is (thus it will not be base64 decoded before the validation). In case your own implementation uses the raw bytes when hashing the password and base64 is only used for display purpose, compile this project with the -DRAW_SALT flag (you could add this in the config.mk file to CFG_CFLAGS).

Creating a user

A trivial utility to generate hashes is included as np. Copy and paste the whole string generated into the respective back-end.

$ np
Enter password:
Re-enter same password:
PBKDF2$sha256$901$Qh18ysY4wstXoHhk$g8d2aDzbz3rYztvJiO3dsV698jzECxSg

For example, in Redis:

$ redis-cli
> SET n2 PBKDF2$sha256$901$Qh18ysY4wstXoHhk$g8d2aDzbz3rYztvJiO3dsV698jzECxSg
> QUIT

Configure Mosquitto

listener 1883

auth_plugin /path/to/auth-plug.so
auth_opt_redis_host 127.0.0.1
auth_opt_redis_port 6379

# Usernames with this fnmatch(3) (a.k.a glob(3))  pattern are exempt from the
# module's ACL checking
auth_opt_superusers S*

ACL

In addition to ACL checking which is possibly performed by a back-end, there's a more "static" checking which can be configured in mosquitto.conf.

Note that if ACLs are being verified by the plugin, this also applies to Will topics (last will and testament). Failing to correctly set up an ACL for these, will cause a broker to silently fail with a 'not authorized' message.

Users can be given "superuser" status (i.e. they may access any topic) if their username matches the glob specified in auth_opt_superusers.

In our example above, any user with a username beginning with a capital "S" is exempt from ACL-checking.

PUB/SUB

At this point you ought to be able to connect to Mosquitto.

mosquitto_pub  -t '/location/n2' -m hello -u n2 -P secret

PSK

If Mosquitto has been built with PSK support, and auth-plug has been built with BE_PSK defined, it supports authenticating PSK connections over TLS, as long as Mosquitto is appropriately configured.

The way this works is that the psk back-end actually uses one of auth-plug's other databases (mysql, sqlite, cdb, etc.) to obtain the pre-shared key from the "users" query, and it uses the same database's back-end for performing authorization (aka ACL checks).

Consider the following mosquitto.conf snippet:

...
auth_opt_psk_database mysql
...
listener 8885
psk_hint hint1
tls_version tlsv1
use_identity_as_username true

TLS PSK is available on port 8885 and is activated with, say,

mosquitto_pub -h localhost -p 8885 -t x -m hi --psk-identity ps2 --psk 020202

The use_identity_as_username option has auth-plug see the name ps2 as the username, and this is given to the database back-end (here: mysql) to look up the password as defined for the mysql back-end. auth-plug uses its getuser() query to read the clear-text (not PKBDF2) hex key string which it returns to Mosquitto for authentication. If authentication passes, the connection is established.

For authorization, auth_plug uses the identity as the username and the topic to perform ACL-checking as described earlier.

The following log-snippet serves as an illustration:

New connection from ::1 on port 8885.
|-- psk_key_get(hint1, ps1) from [mysql] finds PSK: 1
New client connected from ::1 as mosqpub/90759-tiggr.ww. (c1, k60).
Sending CONNACK to mosqpub/90759-tiggr.ww. (0)
|-- user ps1 was authenticated in back-end 0 (psk)
|--   mysql: topic_matches(x, x) == 1
|-- aclcheck(ps1, x, 2) AUTHORIZED=1 by psk
Received PUBLISH from mosqpub/90759-tiggr.ww. (d0, q0, r0, m0, 'x', ... (2 bytes))
Received DISCONNECT from mosqpub/90759-tiggr.ww.

Requirements

hiredis, the Minimalistic C client for Redis
OpenSSL (tested with 1.0.0c, but should work with earlier versions)
A Mosquitto broker
A Redis server
MySQL
TinyCDB by Michael Tokarev (included in contrib/).

Credits

Uses base64.[ch] (and yes, I know OpenSSL has base64 routines, but no thanks). These files are

Copyright (c) 1995, 1996, 1997 Kungliga Tekniska Hgskolan (Royal Institute of Technology, Stockholm, Sweden).

Uses [uthash][2] by Troy D. Hanson.

Possibly related

Press

How to make Access Control Lists (ACL) work for Mosquitto MQTT Broker with Auth Plugin

Name		Name	Last commit message	Last commit date
Latest commit History 341 Commits
contrib		contrib
examples		examples
.gitignore		.gitignore
LICENSE.txt		LICENSE.txt
Makefile		Makefile
README.md		README.md
auth-plug.c		auth-plug.c
backends.c		backends.c
backends.h		backends.h
base64.c		base64.c
base64.h		base64.h
be-cdb.c		be-cdb.c
be-cdb.h		be-cdb.h
be-files.c		be-files.c
be-files.h		be-files.h
be-http.c		be-http.c
be-http.h		be-http.h
be-jwt.c		be-jwt.c
be-jwt.h		be-jwt.h
be-ldap.c		be-ldap.c
be-ldap.h		be-ldap.h
be-mongo.c		be-mongo.c
be-mongo.h		be-mongo.h
be-mysql.c		be-mysql.c
be-mysql.h		be-mysql.h
be-postgres.c		be-postgres.c
be-postgres.h		be-postgres.h
be-psk.c		be-psk.c
be-psk.h		be-psk.h
be-redis.c		be-redis.c
be-redis.h		be-redis.h
be-sqlite.c		be-sqlite.c
be-sqlite.h		be-sqlite.h
cache.c		cache.c
cache.h		cache.h
config.mk.in		config.mk.in
envs.c		envs.c
envs.h		envs.h
hash.c		hash.c
hash.h		hash.h
log.c		log.c
log.h		log.h
np.c		np.c
pbkdf2-check.c		pbkdf2-check.c
userdata.h		userdata.h
uthash.h		uthash.h

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Repository files navigation

mosquitto-auth-plug

Introduction

Building the plugin

Configuration

MySQL

LDAP

CDB

SQLITE

Redis

HTTP

JWT

PostgreSQL

MongoDB

Users collection

Topic lists collection (optional)

ACL format

Configuration

Files

`password_file`

`acl_file`

Passwords

Creating a user

Configure Mosquitto

ACL

PUB/SUB

PSK

Requirements

Credits

Possibly related

Press

About

Releases

Packages

Languages

License

Wolkabout/mosquitto-auth-plug

Folders and files

Latest commit

History

Repository files navigation

mosquitto-auth-plug

Introduction

Building the plugin

Configuration

MySQL

LDAP

CDB

SQLITE

Redis

HTTP

JWT

PostgreSQL

MongoDB

Users collection

Topic lists collection (optional)

ACL format

Configuration

Files

password_file

acl_file

Passwords

Creating a user

Configure Mosquitto

ACL

PUB/SUB

PSK

Requirements

Credits

Possibly related

Press

About

Resources

License

Stars

Watchers

Forks

Releases

Packages 0

Languages

`password_file`

`acl_file`

Packages