Source added

HumidityCC03_CS11/HumidityCC03_CS11.ino

@@ -0,0 +1,110 @@
+#include <xCore.h>  //include xCore library
+#include <xSW01.h>  //include sensor library
+#include <xOD01.h>
+
+#if defined(ESP8266)
+#define RED   RED
+#define GREEN GREEN
+#define BLUE  BLUE
+#include <ESP8266WiFi.h>
+#define Serial Serial
+
+#elif defined(ARDUINO_SAMD_ZERO)
+#define RED   CC03_RED
+#define GREEN CC03_GREEN
+#define BLUE  CC03_BLUE
+#define Serial SerialUSB
+
+#elif defined(ARDUINO_AVR_PRO)
+#define RED   CC01_RED
+#define GREEN CC01_GREEN
+#define BLUE  CC01_BLUE
+#define Serial Serial
+
+#elif defined(ESP32)
+#define RED   CW02_RED
+#define GREEN CW02_GREEN
+#define BLUE  CW02_BLUE
+#define Serial Serial
+#endif
+
+// Create a variable for the storage of data received from SW01  
+  float Relative_Humidity;
+  unsigned long previousMilli_1 = 0;  // timing variable for serial monitor
+  const long interval_1= 5000;        // time delay for serial monitor
+  bool flag;
+
+
+const int DELAY_TIME = 1000;
+
+xSW01 SW01;
+
+void setup() {
+
+  #if defined(ESP8266)
+  WiFi.forceSleepBegin();
+  Wire.begin(2, 14);
+  Wire.setClockStretchLimit(15000);
+
+#elif defined(ARDUINO_SAMD_ZERO)
+  Wire.begin();
+
+#elif defined(ARDUINO_AVR_PRO)
+  Wire.begin();
+
+#elif defined(ESP32)
+  Wire.begin();
+
+#endif
+
+  // Start the Serial Monitor
+  Serial.begin(115200);
+
+  // Start the SW01
+  SW01.begin();
+  OLED.begin();
+
+  //Intialising variables
+  Relative_Humidity = 0;
+
+  OD01.println("Humidity Project");
+  OD01.println("=================");
+
+  //Delay for sensor to normalise
+  delay(3000);
+}
+
+void loop() {
+
+  // Read and calculate data from SW01 sensor
+  SW01.poll();
+
+  // Request the temperature measurement from SW01 and store in
+  // the temperature variable   
+  Relative_Humidity = SW01.getHumidity(); // Relative Humidity in Percentage format
+  display_humidity();
+
+}
+
+void display_humidity() {
+
+  // timing delay according to interval_1 variable
+  // do not use the delay() function as it will pause all operations
+  unsigned long currentMilli_1 = millis();
+  if(currentMilli_1 - previousMilli_1 >= interval_1){
+    previousMilli_1 = currentMilli_1;
+    if(flag == false){
+      flag = true;
+    }
+    else{
+      flag = false;
+    }
+
+
+ // Show data over the Serial Monitor   
+  OD01.print("Relative_Humidity: ");
+  OD01.print(Relative_Humidity);
+  OD01.println(" %");
+  }
+}
+

HumidityCW01/HumidityCW01.ino

@@ -0,0 +1,72 @@
+#include <xCore.h>  //include xCore library
+#include <xSW01.h>  //include sensor library
+#include <xOD01.h>
+
+
+
+// Create a variable for the storage of data received from SW01  
+  float Relative_Humidity;
+  unsigned long previousMilli_1 = 0;  // timing variable for serial monitor
+  const long interval_1= 5000;        // time delay for serial monitor
+  bool flag;
+
+
+const int DELAY_TIME = 1000;
+
+xSW01 SW01;
+
+void setup() {
+  // Start the Serial Monitor
+  Serial.begin(115200);
+
+  // START I2C COMMUNICATION
+  Wire.begin(2, 14);
+
+  // Start the SW01
+  SW01.begin();
+  OLED.begin();
+
+  //Intialising variables
+  Relative_Humidity = 0;
+
+  OD01.println("Humidity Project");
+  OD01.println("=================");
+
+  //Delay for sensor to normalise
+  delay(3000);
+}
+
+void loop() {
+
+  // Read and calculate data from SW01 sensor
+  SW01.poll();
+
+  // Request the temperature measurement from SW01 and store in
+  // the temperature variable   
+  Relative_Humidity = SW01.getHumidity(); // Relative Humidity in Percentage format
+  display_humidity();
+
+}
+
+void display_humidity() {
+
+  // timing delay according to interval_1 variable
+  // do not use the delay() function as it will pause all operations
+  unsigned long currentMilli_1 = millis();
+  if(currentMilli_1 - previousMilli_1 >= interval_1){
+    previousMilli_1 = currentMilli_1;
+    if(flag == false){
+      flag = true;
+    }
+    else{
+      flag = false;
+    }
+
+
+ // Show data over the Serial Monitor   
+  OD01.print("Relative_Humidity: ");
+  OD01.print(Relative_Humidity);
+  OD01.println(" %");
+  }
+}
+