Skip to content

Latest commit

 

History

History
70 lines (53 loc) · 3.74 KB

README.md

File metadata and controls

70 lines (53 loc) · 3.74 KB

Plugin Configuration

Config Parameter Value Description
hal_zigbee.com_port Name or location of com port The port where radio dongle is connected
hal_zigbee.dongle= CC2531 or CONBEE or XBEE Configure the dongle type
hal_zigbee.network.channel Integer
hal_zigbee.network.panid Integer
hal_zigbee.network.epanid HEX
hal_zigbee.network.nwkey HEX
hal_zigbee.network.linkkey HEX

Hardware

You need to buy the following items:

  1. http://www.ti.com/tool/cc2531emk
  2. http://www.ti.com/tool/cc-debugger

Flashing Dongle

These instructions are a modified version of from: https://www.zigbee2mqtt.io/information/flashing_the_cc2531.html

Firmware

You first need to download the firmware that should be flashed to the stick. There are multiple sources where firmware can be downloaded at:

  • Download firmware from GitHub CC2531_DEFAULT_xxxxxxx.zip (If link is dead try latest version here). More information about available firmware can be found here.
  • Download official Z-STACK software (We do not actually need the software just the firmware binary that is included in the installation) from https://www.ti.com/tool/Z-STACK (You will need to create an account to download)

Windows

  1. Download and install the "SmartRF Flash Programmer" (Not v2) application from https://www.ti.com/tool/FLASH-PROGRAMMER

  2. Connect CC debugger to the CC2531 USB sniffer.

  3. Connect BOTH the CC2531 USB sniffer and the CC debugger to your PC using USB.

    • If the light on the CC debugger is RED press set reset button on the CC debugger. The light on the CC debugger should now turn GREEN. If not use CC debugger user guide to troubleshoot your problem.

  4. Start SmartRF Flash Programmer, with the properties below:

    • Flash image: Locate the binary at \Projects\zstack\ZNP\CC253x\dev\ (Make sure to select the .hex file and not the .bin file).
    • Uncheck "Retain IEEE address when reprogramming the chip".

  5. Press "Perform Action" to start flashing.

Linux or MacOS

  1. Install prerequisites for CC-Tool using a package manager (e.g. Homebrew for macOS)

    • Ubuntu/Debian: libusb-1.0-0-dev, libboost-all-dev, autoconf, libtool
    • Fedora: dh-autoreconf, boost-devel, libusb1-devel, gcc-c++
    • Archlinux: dh-autoreconf, libusb, boost
    • macOS: brew install autoconf automake libusb boost pkgconfig libtool
    • Raspbian: dh-autoreconf, libusb-1.0-0-dev, libboost-all-dev

  2. Build cc-tool

     git clone https://github.com/dashesy/cc-tool.git
 cd cc-tool
 ./bootstrap
 ./configure
 make

  3. Connect BOTH the CC2531 USB sniffer and the CC debugger to your PC using USB.

    • If the light on the CC debugger is RED press set reset button on the CC debugger. The light on the CC debugger should now turn GREEN. If not use CC debugger user guide to troubleshoot your problem.

  4. Flash your firmware:

     sudo ./cc-tool -e -w CC2531ZNP-Prod.hex

References