Home
The Kernal64 emulator can execute programs taken, mainly, from four types of devices:
- D64, 1541 disk format
- TAP/T64 tape format
- PRG files
- CRT, cartridges
Here a list of sites where you can find games, applications, utilities, etc:
- http://www.cbm8bit.com/
- http://www.elysium.filety.pl/tools/cartridges/pack.2/%3D%3D%3Dindex.html
- http://www.haddewig.de/nogames64/tools.html
- http://www.c64.com/
- http://csdb.dk/
- http://www.lyonlabs.org/commodore/onrequest/geos.html
- http://old.c64warez.com/
Yes, it's possible, still today, to connect to an old Bulletin Board System. For a list of BBS see http://cbbsoutpost.servebbs.com/
To connect to the external world, the RS-232 interface is used: Two ways are possible, the User Port and the Expansion Port. The first one was used, mainly, for the old Commodore modems. The RS-232 Kernal routines work on this implementation but are limited to 1200/2400 baud. The latter one was used by cartridges, like SwiftLink and can run up to 38400 baud.
To activate an RS-232 implementation go to the Settings Menu, and select RS-232. Here you can choose the available implementations. For SwiftLink, choose "SwiftLink $DF00" (if you want to put it on IO2) or "SwiftLink $DE00 + REU" to install a SwiftLink on $DE00 + 512K of REU on $DF00. Then it asked to type the configuration string: here you can type the bbs server and port, to connect immediately, or you can type 'modem' to postpone the connection. If you postpone the connection remember to connect inside your terminal program: in the terminal type ad host:port + RETURN. I suggest you to use NovaTerm v9.6 as a terminal program. Remember to select the SwiftLink RS-232 driver.
Here some examples:
