Skip to content

Latest commit

 

History

History
 
 

IoTOnboarding

Folders and files

NameName
Last commit message
Last commit date

parent directory

..
 
 
 
 
page_type urlFragment languages products description
sample
iot-onboarding
csharp
windows
windows-iot
This sample illustrates a technique for remotely joining your Headless Windows 10 IoT Core device (an IoT device without a display) to your home Wi-Fi network.

IoT WiFi Onboarding with AllJoyn

This sample illustrates a technique for remotely joining your Headless IoT Device (an IoT device without a display) to your home Wi-Fi network. To accomplish this, the sample starts a Wi-Fi Software Access Point (Soft-AP) on your IoT Device and then starts an AllJoyn Onboarding Producer. The Soft-AP provides a way for a PC or Smart Phone to remotely connect to your IoT Device, and the AllJoyn Producer provides a service for remotely configuring your IoT Device's Wi-Fi configuration.

Prerequisites

  1. A headed or headless IoT device with Wi-Fi capability. (e.g. RPi3, RPi2 with Wi-Fi adapter, etc).
  2. An available Wi-Fi network for onboarding your IoT device. Wi-Fi network may provide Open Authentication or may be secured with WPA2-PSK authentication. Substitute a Personal Hotspot from a cell phone if desired.
  3. A laptop with Wi-Fi capability running Windows 10. Substitute with another Windows 10 IoT Device if desired.
  4. Visual Studio 2015 or newer running on laptop or desktop.

Step 1: IoT Device Setup

Note: It is recommended to start with a clean O/S install of your IoT Device. Your IoT Device must not have been connected to a Wi-Fi network. Remove all Wi-Fi Network Profiles from your Iot Device if not starting from a clean O/S install.

  1. Install a clean O/S to your IoT Device. If using IoT Dashboard, deselect the "Wi-Fi Network Connection" checkbox when preparing your SD Card.

  2. If your IoT Device needs an external Wi-Fi adapter, attach it now.

  3. Boot your IoT Device with the clean O/S install.

  4. For some versions of Windows 10 IoT builds it may be necessary to configure the firewall to allow Inbound AllJoyn Connections. Note: Refer to Network Type and Firewall Configuration for additional information

    1. Temporarily connect your Iot Device to a wired LAN connection shared with your development system.
    2. Open a powershell connection with your IoT Device and login as an administrator
    3. From the powershell command line type the following: Set-NetFirewallRule -Name 'AllJoyn-Router-In-UDP' -Profile any Set-NetFirewallRule -Name 'AllJoyn-Router-In-TCP' -Profile any
    4. Disconnect your IoT Device from the wired LAN connection.
  5. For Windows 10 IoT builds 10.0.14393 or earlier, the IoT Onboarding sample must be replaced.
    Note: These steps are not required for newer Windows 10 IoT Builds.

    1. Temporarily connect your Iot Device to a wired LAN connection shared with your development system.
    2. Copy or clone samples to your development system.
    3. Build the IotOnboarding Solution (c:\samples\IotOnboarding\IotOnboarding.sln) for your Iot Device's platform (e.g. ARM, x86, x64).
    4. Deploy the IotOnboarding Solution to your IoT Device.
    5. Disconnect your IoT Device from the wired LAN connection.

Step 2: Wi-Fi Network Setup

  1. Ensure your Wi-Fi Router is on and configured to allow a network connection.

Step 3: Laptop Setup

  1. Download and unzip the Windows Universal Samples source from here.
  2. Within the Windows Universal Sample, find the AllJoyn Consumer Experiences solution (\samples\AllJoyn\ConsumerExperiences\cs\AllJoynConsumerExperiences.sln) and open with Visual Studio.
    Note: This sample will be used to onboard your IoT Device, however an alternate AllJoyn Onboarding Consumer may be used if desired.
  3. Build the AllJoyn Consumer Experiences Sample to run on your laptop. (For example, select Release/x64, Release/x86 or Release/Arm as necessary)
  4. If not already, disconnect your laptop from all Wi-Fi and wired networks.

Step 4: Onboard your IoT Device

  1. Run the AllJoyn Consumer Experiences Sample on your laptop.
  2. From the menu on the left, Select Scenario "2) Onboarding Consumer".
  3. Select "Physical Device".
  4. Press the "Scan" button.
  5. Select a laptop Wi-Fi Adapter from the drop-down list. After selection, another new drop-down should appear.
  6. Select the Soft-AP for your IoT Device from the new drop-down list (e.g. AJ_YourDeviceName_XXXXXXXXXXXX) and press Connect.
    Note: The the X's represent the MAC address of your device's Wi-Fi Adapter.
  7. Enter the password for your IoT Device's Soft-AP and press Connect again.
    Note: The default password is 'p@ssw0rd' without the quotes. Learn more about this below.
  8. The AllJoyn Consumer Experiences application will connect with your device's Soft-AP and will then connect to your device's AllJoyn Onboarding Producer. When completed successfully, the AllJoyn Consumer Experiences app queries your IoT Device for the list of Wi-Fi networks that are visible to your IoT Device. The list will be shown in the SSID dropdown.
  9. To Onboard your IoT Device to a Wi-Fi network, select the Wi-Fi network's SSID from the SSID drop-down menu.
  10. Enter a password for that network (if necessary).
  11. Press the Onboard button.
  12. If the Wi-Fi network credentials are valid, your IoT device will connect to your Wi-Fi network.

IotOnboarding Customization

The IotOnboarding code may be modified as needed for your use, but there are several basic settings that may be customized through the default configuration file "config.xml". Note that for experimentation, some of these values may be configured through your IoT Device's Web Interface when your IoT Device is connected to a wired LAN.

Setting Description
AllJoyn Onboarding Settings
Enabled Enables or Disables AllJoyn Onboarding
DefaultDescription Device description shared through the AllJoyn About Data
DefaultManufacturer Device manufacturer shared through the AllJoyn About Data
ModelNumber Device model number shared through the AllJoyn About Data
Psk Specifies the AllJoyn Onboarding Producer Authentication PSK. When this value is empty, the AllJoyn Onboarding Producer uses ECDHE_NULL authentication, otherwise ECDHE_PSK authentication is used.
SoftAP Settings
Enabled Enables or Disables the device's Soft AP (Note: if AllJoynOnboarding:Enabled is true, this value is ignored and assumed to be true)
Password The Soft-AP password. This value must conform to the WPA2-PSK requirements (It must be between 8 and 63 printable ASCII characters). (Note: This can also be set to empty and in this case Soft-AP uses "Open/None Authentication")
Ssid The Soft-AP SSID. This value will be prefixed with AJ_ if AllJoyn Onboarding is enabled. The value is suffixed with the Wi-Fi Adapter's MAC Address.

Additional Information

Multi-Level Authentication

There are two levels of authentication for Iot Onboarding. The first level establishes connectivity with the SoftAP. Once connected to the Soft-AP, the second level permits connectivity with the AllJoyn Producer. To reduce the number of authentication requests, the second level is disabled in the config.xml file. (Refer to the AllJoynOnboarding:Psk setting.)

Soft-AP Password Broadcast

The Soft-AP created by the IotOnboarding application utilizes WPA2-PSK authentication unless Open authentication is used. When using WPA2-PSK authentication, the password used for IoT Onboarding is shared through the Soft-AP's Information Elements so that supporting AllJoyn Consumer applications may connect to an IoT Device without prompting for a password. This functionality may be disabled through a code change in "OnboardingAccessPoint.cs".

Soft-AP and Wi-Fi Profiles

The Soft-AP and AllJoyn Onboarding settings are ignored when a Wi-Fi profile is detected. In theory, once a device has a Wi-Fi profile configured, there is no longer a need to Onboard the device. This behavior can be changed by modifying the control logic in OnboardingService.cs. For example, a hardware switch could be polled that re-enables the Soft-AP when a button is pressed. To change the logic, replace the code that sets the "_state" variable to "OnboardingState.ConfiguredValidated" when a Wi-Fi profile is found.

Network Type and Firewall Configuration

Soft-AP networks default to "Public" network types. This means that certain inbound connections will be blocked by the Windows Firewall and consequently the AllJoyn Onboarding Producer contained within the IotOnboarding sample will not be discoverd by an AllJoyn Consumer. To ensure the AllJoyn Producer is discoverable it may be necessary to configure the Windows Firewall to allow UDP and TCP inbound connections for the specific AllJoyn ports.

When embedding your own version of AllJoyn Onboarding in a commercial product, the firewall can be configured as part of your device's custom provisioning package (see Adding A Provisioning Package to An Image and the firewall configuration setting).