From 54d0c93bb25c0826cf6f867d338591908f452e5d Mon Sep 17 00:00:00 2001 From: ASDosjani <62965528+ASDosjani@users.noreply.github.com> Date: Thu, 27 Jun 2024 21:44:47 +0200 Subject: [PATCH 1/2] Sync index.md --- content/index.md | 66 +++++++++++++++++++++++++++++++++++------------- 1 file changed, 48 insertions(+), 18 deletions(-) diff --git a/content/index.md b/content/index.md index ac352cb..b64657b 100644 --- a/content/index.md +++ b/content/index.md @@ -1,32 +1,29 @@ ---- -title: 'Home' -description: 'Landingpage' ---- - # AM32-MultiRotor-ESC-firmware - -Firmware for STM32F051 based speed controllers for use with mutirotors +Firmware for ARM based speed controllers

GitHub license

The AM32 firmware is designed for STM32 ARM processors to control a brushless motor (BLDC). -The firmware is intended to be safe and fast with smooth fast startups and linear throttle. It is meant for use with multirotor aircraft and a flight controller. The firmware can also be built with support for crawlers. +The firmware is intended to be safe and fast with smooth fast startups and linear throttle. It is meant for use with multiple vehicle types and a flight controller. The firmware can also be built with support for crawlers. For crawler usage please read this wiki page [Crawler Hardware](https://github.com/AlkaMotors/AM32-MultiRotor-ESC-firmware/wiki/Crawler-Hardware-and-AM32) ## Features AM32 has the following features: -- Firmware upgradable via betaflight passthrough - only support G4, F4 and F7 FCs, and make sure your betaflight firmware is up to date when you trying to use passthrough +- Firmware upgradable via betaflight passthrough, single wire serial or arduino - Servo PWM, Dshot(300, 600) motor protocol support - Bi-directional Dshot - KISS standard ESC telemetry - Variable PWM frequency - Sinusoidal startup mode, which is designed to get larger motors up to speed +## Build instructions +Download and install Keil community edition. Open the Keil project for the mcu you want in the "Keil projects" folder. Install any mcu packs if prompted. +Select the build target from the drop down box and build project ## Firmware Release & Configuration Tool -The latest release of the firmware can be found [here](https://github.com/AlkaMotors/AM32-MultiRotor-ESC-firmware/releases/). +The latest release of the firmware can be found [here](https://am32.ca/downloads). To configure AM32 and upload firmware you can use the Multi_ESC config tool using Betaflight passthrough. They can be downloaded from here: @@ -35,27 +32,60 @@ To configure AM32 and upload firmware you can use the Multi_ESC config tool usin Alternately you can use the [Online-ESC Configurator](https://esc-configurator.com/) to flash or change settings with any web browser that supports web serial. + + ## Hardware +AM32 currently has support for STSPIN32F0, STM32F051, STM32G071, GD32E230, AT32F415 and AT32F421. +The CKS32F051 is not recommended due to too many random issues. +Target compatibility List can be found [here](https://github.com/AlkaMotors/AM32-MultiRotor-ESC-firmware/wiki/List-of-Supported-Hardware) (APR 2021) -Target compatibility List can be found [here](https://github.com/AlkaMotors/AM32-MultiRotor-ESC-firmware/wiki/List-of-Supported-Hardware) (DEC 2020) -## Installation & Documentation +## Installation & Bootloader -To use AM32 firmware on a blank ESC, a bootloader must first be installed using a ST-LINK. Choose the bootloader that matches the signal input pin of the ESC. +To use AM32 firmware on a blank ESC, a bootloader must first be installed using an ST-LINK, GD-LINK , CMIS-DAP or AT-LINK. THe bootloader will be dependant on the MCU used ont he esc . Choose the bootloader that matches the MCU type and signal input pin of the ESC. The compatibility chart has the bootloader pinouts listed. -Current bootloaders can be found [here](https://github.com/AlkaMotors/AM32_Bootloader_F051/releases/tag/V6). +Current bootloaders can be found [here](https://github.com/AlkaMotors/AM32_Bootloader_F051/tree/main/Bootloaders). + +After the bootloader has been installed the main firmware from can be installed either with the configuration tools and a Betaflight flight controller or a direct connection with a usb serial adapter modified for one wire. + +To update an existing AM32 bootloader an update tool can be found [here](https://github.com/AlkaMotors/F051_Bootloader_Updater/releases). ## Support and Developers Channel +There are two ways you can get support or participate in improving am32. +We have a discord server here: -There's a dedicated Slack chat channel here: +https://discord.gg/h7ddYMmEVV -[Slack](https://am32-invite.herokuapp.com/) +Etiquette: Please wait around long enough for a reply - sometimes people are out flying, asleep or at work and can't answer immediately. -Etiquette: Don't ask to ask and please wait around long enough for a reply - sometimes people are out flying, asleep or at work and can't answer immediately. +If you wish to support the project please join the Patreon. -## Contributors +https://www.patreon.com/user?u=44228479 + + +## Sponsors +The AM32 project would not have made this far without help from the following sponsors: +Holmes Hobbies - https://holmeshobbies.com/ - The project would not be where it is today without the support of HH. Check out the Crawlmaster V2 for the best am32 experience! + +Repeat Robotics - https://repeat-robotics.com/ - Bringing Am32 esc's to the fighting robot community! + +Quaternium - https://www.quaternium.com/ - Firmware development support and hardware donations + +Airbot - Many hardware donations + +NeutronRC - For hardware, am32 promotion and schematics + +Aikon - Hardware donations and schematics\ +Skystars - For hardware and taking a chance on the first commercial am32 esc's\ +Diatone - Hardware donations\ +T-motor - Motor and Hardware donations\ +HLGRC - Hardaware donations + + +## Contributors A big thanks to all those who contributed time, advice and code to the AM32 project.\ +Un!t\ Hugo Chiang (Dusking)\ Micheal Keller (Mikeller)\ ColinNiu\ From fe9767b0913ff3a83aaa432a8251d1581569cd20 Mon Sep 17 00:00:00 2001 From: ASDosjani Date: Sat, 29 Jun 2024 23:47:30 +0200 Subject: [PATCH 2/2] recommended fixes --- content/index.md | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/content/index.md b/content/index.md index b64657b..81ccce6 100644 --- a/content/index.md +++ b/content/index.md @@ -42,9 +42,9 @@ Target compatibility List can be found [here](https://github.com/AlkaMotors/AM32 ## Installation & Bootloader -To use AM32 firmware on a blank ESC, a bootloader must first be installed using an ST-LINK, GD-LINK , CMIS-DAP or AT-LINK. THe bootloader will be dependant on the MCU used ont he esc . Choose the bootloader that matches the MCU type and signal input pin of the ESC. +To use AM32 firmware on a blank ESC, a bootloader must first be installed using an ST-LINK, GD-LINK, CMSIS-DAP, AT-LINK, J-Link or any other CMSIS capable debug probe. The bootloader will be dependant on the MCU used on the esc. Choose the bootloader that matches the MCU type and signal input pin of the ESC. The compatibility chart has the bootloader pinouts listed. -Current bootloaders can be found [here](https://github.com/AlkaMotors/AM32_Bootloader_F051/tree/main/Bootloaders). +Current bootloaders can be found [here](https://github.com/AlkaMotors/AM32_Bootloader_F051/tree/main/Bootloaders) or [here](https://am32.ca/downloads). After the bootloader has been installed the main firmware from can be installed either with the configuration tools and a Betaflight flight controller or a direct connection with a usb serial adapter modified for one wire. @@ -85,7 +85,7 @@ HLGRC - Hardaware donations ## Contributors A big thanks to all those who contributed time, advice and code to the AM32 project.\ -Un!t\ +Eike Ahmels (un!t)\ Hugo Chiang (Dusking)\ Micheal Keller (Mikeller)\ ColinNiu\