Merge pull request #600 from analogdevicesinc/tfcollins/adrv9002-prof…

…ile-updates

adi/adrv9002.py

@@ -120,8 +120,12 @@ def write_stream(self, value):
             attr_encode = "stream_config".encode("ascii")
             iio._d_write_attr(self._ctrl._device, attr_encode, data)
 
-    # we cannot really get the profile. The driver will just throw EPERM
-    profile = property(None, write_profile)
+    @property
+    def profile(self):
+        profile_data = self._get_iio_dev_attr_str("profile_config")
+        return dict(x.split(": ") for x in profile_data.split("\n"))
+
+    # we cannot really get the stream. The driver will just throw EPERM
     stream = property(None, write_stream)
 
     @property
@@ -719,3 +723,8 @@ def tx1_lo(self):
     @tx1_lo.setter
     def tx1_lo(self, value):
         self._set_iio_attr("altvoltage3", "frequency", True, value)
+
+    @property
+    def api_version(self):
+        """api_version: Get the version of the API"""
+        return self._get_iio_debug_attr_str("api_version")

examples/adrv9002_profile_example.py

@@ -0,0 +1,177 @@
+"""This example demonstrates how to load a prebuilt profile or create a custom
+profile for the ADRV9002 transceiver. If you have libadrv9002-iio installed,
+you can create a custom profile. Otherwise, you can use a prebuilt profile that
+was generated using libadrv9002-iio or TES.
+"""
+
+import argparse
+import os
+import time
+
+import adi
+import matplotlib.pyplot as plt
+import numpy as np
+from scipy import signal
+
+# Find the location of this script since the profile folder is relative to it
+loc = os.path.dirname(os.path.realpath(__file__))
+
+try:
+    # Try using libadrv9002 to load profiles
+    # Available at: https://analogdevicesinc.github.io/libadrv9002-iio/
+    import adrv9002 as libadrv9002
+    import copy
+
+    use_prebuilt_profiles = False
+except ImportError:
+    print("libadrv9002 not found. Using prebuilt profiles.")
+    use_prebuilt_profiles = True
+    profile_folder = os.path.join(loc, "adrv9002_profiles")
+
+# Add CLI argument for URI
+parser = argparse.ArgumentParser()
+parser.add_argument(
+    "uri", help="URI for IIO context with ADRV9002-EVAL or AD-JUPITER-EZ"
+)
+args = parser.parse_args()
+
+# Create ADRV9002 interface
+uri = args.uri
+sdr = adi.adrv9002(uri=uri)
+
+# Read back radio settings
+current_profile = sdr.profile
+interface_mode = current_profile["SSI interface"].lower()
+api_version = sdr.api_version
+
+print("\nCurrent radio settings:")
+print(f"Interface mode: {interface_mode}")
+print(f"API version: {api_version}")
+
+
+# Configure ADRV9002
+# See here for more information on the ADRV9002 python API:
+# https://analogdevicesinc.github.io/pyadi-iio/devices/adi.adrv9002.html
+if use_prebuilt_profiles:
+    api_version = api_version.replace(".", "_")
+    rate = 40 if interface_mode == "lvds" else 5
+    name = f"lte_{rate}_{interface_mode}_api_{api_version}"
+
+    print(f"\nLoading prebuilt profile: {name}")
+else:
+    #  Create profile configuration
+    print("\nCreating custom profile")
+    rx1 = libadrv9002.rx_radio_channel_config()
+    rx1.enabled = True
+    rx1.adc_high_performance_mode = True
+    rx1.frequency_offset_correction_enable = False
+    rx1.analog_filter_power_mode = 2  # High power/performance
+    rx1.analog_filter_biquad = False
+    rx1.analog_filter_bandwidth_hz = 18000000
+    rx1.channel_bandwidth_hz = 18000000
+    rx1.sample_rate_hz = 30720000
+    rx1.nco_enable = False
+    rx1.nco_frequency_hz = 0
+    rx1.rf_port = 0  # RX-A
+
+    rx2 = copy.deepcopy(rx1)
+
+    tx1 = libadrv9002.tx_radio_channel_config()
+    tx1.enabled = True
+    tx1.sample_rate_hz = 30720000
+    tx1.frequency_offset_correction_enable = False
+    tx1.analog_filter_power_mode = 2  # High power/performance
+    tx1.channel_bandwidth_hz = 18000000
+    tx1.orx_enabled = True
+    tx1.elb_type = 2
+
+    tx2 = copy.deepcopy(tx1)
+
+    r_cfg = libadrv9002.radio_config()
+    r_cfg.adc_rate_mode = 3  # High Performance
+    r_cfg.fdd = False
+    r_cfg.lvds = True
+    r_cfg.ssi_lanes = 2
+    r_cfg.ddr = True
+    r_cfg.adc_rate_mode = 3  # High Performance
+    r_cfg.short_strobe = True
+    r_cfg.rx_config[0] = rx1
+    r_cfg.rx_config[1] = rx2
+    r_cfg.tx_config[0] = tx1
+    r_cfg.tx_config[1] = tx2
+
+    clk_cfg = libadrv9002.clock_config()
+    clk_cfg.device_clock_frequency_khz = 38400
+    clk_cfg.clock_pll_high_performance_enable = True
+    clk_cfg.clock_pll_power_mode = 2  # High power/performance
+    clk_cfg.processor_clock_divider = 1
+
+    adrv_cfg = libadrv9002.adrv9002_config()
+    adrv_cfg.clk_cfg = clk_cfg
+    adrv_cfg.radio_cfg = r_cfg
+
+    # Generate profile and stream binary
+    profile, stream = libadrv9002.generate_profile(adrv_cfg)
+
+    # Save profile and stream
+    name = "custom_profile"
+    profile_folder = os.path.join(loc, "adrv9002_profiles")
+    if not os.path.exists(profile_folder):
+        os.makedirs(profile_folder)
+
+    with open(os.path.join(profile_folder, f"{name}.json"), "w") as f:
+        f.write(str(profile))
+    with open(os.path.join(profile_folder, f"{name}.stream"), "wb") as f:
+        f.write(stream)
+
+    print(f"\nProfile and stream saved to {profile_folder}")
+
+
+# Load profile
+sdr.write_stream_profile(
+    os.path.join(profile_folder, f"{name}.stream"),
+    os.path.join(profile_folder, f"{name}.json"),
+)
+
+
+sdr.rx_enabled_channels = [0]
+sdr.rx_ensm_mode_chan0 = "rf_enabled"
+sdr.rx_ensm_mode_chan1 = "rf_enabled"
+sdr.tx_hardwaregain_chan0 = -20
+sdr.tx_ensm_mode_chan0 = "rf_enabled"
+sdr.tx_cyclic_buffer = True
+
+sdr.rx0_lo = 1000000000
+sdr.tx0_lo = 1000000000
+
+fs = int(sdr.rx0_sample_rate)
+
+# Set single DDS tone for TX on one transmitter
+sdr.dds_single_tone(1000000, 0.9, channel=0)
+
+# Create a sinewave waveform
+# fc = 1000000
+# N = 1024
+# ts = 1 / float(fs)
+# t = np.arange(0, N * ts, ts)
+# i = np.cos(2 * np.pi * t * fc) * 2 ** 14
+# q = np.sin(2 * np.pi * t * fc) * 2 ** 14
+# iq = i + 1j * q
+#
+# # Send data
+# sdr.tx(iq)
+
+sdr.rx_buffer_size = 2 ** 18
+
+# Collect data
+for r in range(20):
+    x = sdr.rx()
+    f, Pxx_den = signal.periodogram(x, fs)
+    plt.clf()
+    plt.semilogy(f, Pxx_den)
+    # plt.ylim([1e-9, 1e2])
+    plt.xlabel("frequency [Hz]")
+    plt.ylabel("PSD [V**2/Hz]")
+    plt.draw()
+    plt.pause(0.05)
+    time.sleep(0.1)