Gateway assembly

Jump to bottom

Mario Frei edited this page Mar 5, 2020 · 6 revisions

Gateway Feather 32u4 Fona

Insert SIM-card into Adafruit Feather 32u4 Fona
Plug Feather 32u4 FONA in custom PCB
Plug in XBee module in custom PCB
Connect the GSM-Antenna to the Feather 32u4 FONA board
Connect the battery to the Feather 32u4 FONA board

Gateway Feather - Add devices

Gateway Mega

Plug Gateway Mega shield onto Arduino Mega
Plugin the components below into the Gateway Mega shield. Make sure that the ground pins from the breakout boards are aligned with the ground pins from the gateway shield.
- SparkFun RTC (incl. Battery)
- SparkFun SD card reader (incl. SD-card)
- SparkFun XBee Explorer Regulated (incl. XBee module)
- Adafruit FONA - Mini Cellular GSM Breakout (incl. SIM-card, antenna, battery; Make sure to connect the 5V pinhole to 5V on the gateway shield, see orange jumper cable)

Gateway Mega - Add devices