Program XBee

• Install X-CTU from digi.com
• Connect SparkFun XBEE Explorer USB board
• Click on «Discover devices»
• Select the Serial Port of the XBee Explorer USB board
• Click «Next»
• Click «Add selected devices»
• Select the XBee you want to program in the left hand side panel
• Click on «Profile» -> Load configuration file
• Choose the appropriate Xbee configuration file from the repository
• Debugging XBee network
  • Connect coordinator with SparkFun Explorer USB board to computer.
  • Open the Xbee module in X-CTU.
  • In the top right corner of the X-CTU window, click on the mesh network button.
  • Click on «Scan».
  • All XBee modules connected to the coordinator will show up.