This repository contains code to incorporate micropython with the IRA setup.
Before you can do anything useful, you will need to setup your local environment and the ESP32 controller. Detailed instructions can be found in the Getting Started guide.
But installing things alone is not enough, you will also need to configure your device. This is described in the Configuration Guidelines.
The design of the system is described in the Design document.
task package VERSION=<major.minor.patch>The copy the contents of the build folder to the ota http server
- Implement topic structure according to individual outputs
- Implement FX
- Implement DMX
- Implement Dual Core support
- Commands
- Command white_pixels
- Command config_change
- Command set_pixel: check if pixel ID is not larger then pixel_count
- Command set_pixel: allow for range support, or implement dedicated command 'set_pixel_range 1-10#ff0000,15-30#00ff00'
- Implement OTA
- Implement IR Config
- Implement IR Blaster reactive behavior