-
Notifications
You must be signed in to change notification settings - Fork 33
/
system.h
108 lines (85 loc) · 5.41 KB
/
system.h
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
/*
system.h - Header for system level commands and real-time processes
Part of Grbl
Copyright (c) 2014-2015 Sungeun K. Jeon
Grbl is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
Grbl is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with Grbl. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef system_h
#define system_h
#include "grbl.h"
// Define system executor bit map. Used internally by realtime protocol as realtime command flags,
// which notifies the main program to execute the specified realtime command asynchronously.
// NOTE: The system executor uses an unsigned 8-bit volatile variable (8 flag limit.) The default
// flags are always false, so the realtime protocol only needs to check for a non-zero value to
// know when there is a realtime command to execute.
#define EXEC_STATUS_REPORT bit(0) // bitmask 00000001
#define EXEC_CYCLE_START bit(1) // bitmask 00000010
#define EXEC_CYCLE_STOP bit(2) // bitmask 00000100
#define EXEC_FEED_HOLD bit(3) // bitmask 00001000
#define EXEC_RESET bit(4) // bitmask 00010000
#define EXEC_SAFETY_DOOR bit(5) // bitmask 00100000
#define EXEC_MOTION_CANCEL bit(6) // bitmask 01000000
// Alarm executor bit map.
// NOTE: EXEC_CRITICAL_EVENT is an optional flag that must be set with an alarm flag. When enabled,
// this halts Grbl into an infinite loop until the user aknowledges the problem and issues a soft-
// reset command. For example, a hard limit event needs this type of halt and aknowledgement.
#define EXEC_CRITICAL_EVENT bit(0) // bitmask 00000001 (SPECIAL FLAG. See NOTE:)
#define EXEC_ALARM_HARD_LIMIT bit(1) // bitmask 00000010
#define EXEC_ALARM_SOFT_LIMIT bit(2) // bitmask 00000100
#define EXEC_ALARM_ABORT_CYCLE bit(3) // bitmask 00001000
#define EXEC_ALARM_PROBE_FAIL bit(4) // bitmask 00010000
#define EXEC_ALARM_HOMING_FAIL bit(5) // bitmask 00100000
// Define system state bit map. The state variable primarily tracks the individual functions
// of Grbl to manage each without overlapping. It is also used as a messaging flag for
// critical events.
#define STATE_IDLE 0 // Must be zero. No flags.
#define STATE_ALARM bit(0) // In alarm state. Locks out all g-code processes. Allows settings access.
#define STATE_CHECK_MODE bit(1) // G-code check mode. Locks out planner and motion only.
#define STATE_HOMING bit(2) // Performing homing cycle
#define STATE_CYCLE bit(3) // Cycle is running or motions are being executed.
#define STATE_HOLD bit(4) // Active feed hold
#define STATE_SAFETY_DOOR bit(5) // Safety door is ajar. Feed holds and de-energizes system.
#define STATE_MOTION_CANCEL bit(6) // Motion cancel by feed hold and return to idle.
// Define system suspend states.
#define SUSPEND_DISABLE 0 // Must be zero.
#define SUSPEND_ENABLE_HOLD bit(0) // Enabled. Indicates the cycle is active and currently undergoing a hold.
#define SUSPEND_ENABLE_READY bit(1) // Ready to resume with a cycle start command.
#define SUSPEND_ENERGIZE bit(2) // Re-energizes output before resume.
#define SUSPEND_MOTION_CANCEL bit(3) // Cancels resume motion. Used by probing routine.
// Define global system variables
typedef struct {
uint8_t abort; // System abort flag. Forces exit back to main loop for reset.
uint8_t state; // Tracks the current state of Grbl.
uint8_t suspend; // System suspend bitflag variable that manages holds, cancels, and safety door.
volatile uint8_t rt_exec_state; // Global realtime executor bitflag variable for state management. See EXEC bitmasks.
volatile uint8_t rt_exec_alarm; // Global realtime executor bitflag variable for setting various alarms.
int32_t position[N_AXIS]; // Real-time machine (aka home) position vector in steps.
// NOTE: This may need to be a volatile variable, if problems arise.
uint8_t homing_axis_lock; // Locks axes when limits engage. Used as an axis motion mask in the stepper ISR.
volatile uint8_t probe_state; // Probing state value. Used to coordinate the probing cycle with stepper ISR.
int32_t probe_position[N_AXIS]; // Last probe position in machine coordinates and steps.
uint8_t probe_succeeded; // Tracks if last probing cycle was successful.
} system_t;
extern system_t sys;
// Initialize the serial protocol
void system_init();
// Returns if safety door is open or closed, based on pin state.
uint8_t system_check_safety_door_ajar();
// Executes an internal system command, defined as a string starting with a '$'
uint8_t system_execute_line(char *line);
// Execute the startup script lines stored in EEPROM upon initialization
void system_execute_startup(char *line);
// Returns machine position of axis 'idx'. Must be sent a 'step' array.
float system_convert_axis_steps_to_mpos(int32_t *steps, uint8_t idx);
// Updates a machine 'position' array based on the 'step' array sent.
void system_convert_array_steps_to_mpos(float *position, int32_t *steps);
#endif