• Introduction
• First principles
• Organization
  • Process vs progress
  • Let it go
  • Reuse vs reinvent
  • What and why before how
• Design
  • Architectural patterns
  • Project bootstrapping
• Development
  • Programming languages
  • Version control
  • Handling dependencies
  • Build tools
  • Continuous integration
  • Deployment
  • Documentation
  • Source management
• Runtime failures
  • Out of memory (OOM)
  • Segmentation fault
  • A note on return status
  • Races
• Algorithms and data structures
  • Performance
  • Volumetric data
  • Rotations / orientations
• Coordinate systems
  • Geodetic coordinates
• Date, time, and locale
• Protocols and serialization
• General style policies
  • Naming
  • Formatting
  • Use tools
  • Do not abuse tools
• Coding styles
  • Follow common styles
  • Don’t follow styles literally
  • General rules
  • C++
• Package conventions
  • Naming
  • Layout
  • Installation paths
• Networking
  • TCP
• Fixing robot models
  • Inertia
• Other
  • ROS
  • Telemetry

Introduction

This is a collection of my passive-aggressive notes on software development. It primarily concerns C++, Linux, and robotic applications, in other words, embedded / headless systems consisting of a large number of heterogeneous software components, running with minimal human intervention. Sections of the document are ordered by decreasing level of abstraction.

First principles

1. Human friendliness: minimize everyone’s mental work.

   • The less you need to think the more you can do.

2. Consistency: make your choices and stick to them.

   • Ensures (1).

3. Automation: any action that is performed more than once must be automated.

   • Ensures (1) and (2).

Organization

Process vs progress

• In my experience the trade-off between the two is always biased to the latter, i.e., everything else is sacrificed to delivering quick results. In the end, the codebase is unmanageable, results are unstable, and further progress becomes more and more challenging. The more ambitious your goals are the more effort you have to spend on organizing your processes, possibly delaying your progress.

• This trade-off is also important in refactoring legacy code base: if you have no proper processes to ensure that there are no regressions and new requirements are met, you are just adding to a pile of garbage without a hope to improve anything.

Let it go

The field is quite dynamic and, although the changes are not always for the best, you have to adapt and be ready to abandon your past achievements if necessary and move on.

Reuse vs reinvent

Professional curiosity and ambitions, as well as laziness, often push developers to reinventing existing tools and methodologies, rather than studying alternatives and making an informed and pragmatic choice. Maintaining your own code is often more expensive than working around the quirks of 3rd party software.

What and why before how

When a new development is being discussed it is common to lose focus and drift toward discussion of implementation rather than the purpose. Even experienced developers tend to be carried away. For this reason, it is advisable to explicitly separate discussions of what must be done, and how it must be done. The first must result in a requirements document that would help to ensure that development is moving in the right direction and to track progress.

Design

Architectural patterns

Transformation API symmetry

If you transform data to a different representation, e.g., by writing it from memory to a file, you or somebody else almost always is going to need to perform the reverse transformation. Take this into account when designing new API and don’t neglect implementation of reverse operations: that helps to find bugs, facilitates testing, makes your code and data more coherent. Also, assuming that users must manually compose input files for your code is a dick move.

Examples:

• URDF format is commonly used for robot model description in ROS. There is a standard parser for it, but no emitter. Unfortunately you may need to modify and store model automatically, e.g., when performing parameter identification, in which case you’ll have to implement some ugly workarounds.

• The second example comes from STL library where you can find std::to_string (since C++11) but no std::from_string. For this reason, boost::lexical_cast should always be preferred since it works both ways.

Configuration-driven development

• Start implementing services (ROS nodes) with a configuration file, this way you can avoid hardcoded constants and save time during development and testing.

• Configuration files are better than command line arguments: they are more general and scalable.

• Choose YAML or JSON by default. XML is unnecessarily verbose, lacks array type, has ambiguous choice between attributes and child nodes. Custom formats such as TOML should also be avoided since they are generally inferior to YAML/JSON.

• Use serialization / reflection libraries to abstract from a particular file format, e.g., https://github.com/asherikov/ariles.

• Don’t forget to respect transformation API symmetry –- sooner or later you are going to need to modify configuration during execution and export it for future use.

• Global configuration of the system, e.g., via ROS parameter server, is quite convenient, but should always be used as read-only from services. Use messages or services to pass parameters between services instead.

• Environment variables should not be used for controlling your services, but might be necessary to alter behavior of 3rd-party applications and scripts.

Process isolation

Isolation between processes is way better than between threads. Use this to your advantage by isolating 3rd-party, potentially unreliable, or non-critical components of you software system in standalone processes. For the same reason, I recommend using ROS nodelets only when absolutely necessary, they are just a workaround for poor IPC.

Let it crash

“Let it crash” approach to failure handling comes from Erlang – a language designed for telecommunication applications https://en.wikipedia.org/wiki/Erlang\_(programming_language)#%22Let_it_crash%22_coding_style

You have to accept that your programs are going to crash, which means that:

• you have to have a restarting mechanism in place, e.g., a service manager;

• in some cases it is better to crash than try to recover on the fly, e.g., segmentation faults mentioned above;

• you should exploit process isolation as described above to localize failures.

Let it vanish

This is also an old and ubiquitous design pattern, but I don’t recall a specific term for it so I named it to relate to “let it crash”. The main idea is that you have to design your software to lose data when appropriate:

• If you are working with large amounts of data you may simply run out of memory if you don’t limit size of you buffers.

• Even if your data buffers are limited you may run into situations when they are filled to a degree when data gets too old by the time the processing code receives it. This is relevant for many data-rich sensors such as cameras, lidars, etc.

I/O isolation

I/O is expensive, especially when it is performed via interactive terminals. It is a common practice to localize I/O in separate threads to avoid interference with time critical operations. For a similar reason, you should generally delay transferring of debug and logging information until the end of time critical methods, such as control loops.

State machines

State machines are often employed for representing robot behaviors, but in my opinion they should be used more for implementation of individual services. Any time you work on a service that changes its behavior in response to some command messages, for example using http://wiki.ros.org/actionlib, it is necessary to consider a finite state machine.

Fail early

Early failures usually have lower cost, for example, if you can detect a failure during source code compilation you are saving time on deployment and tests, if you can validate drone state before takeoff you can potentially avoid a crash, and so on.

Single source shared parameters

Parameters shared by different components of the stack should come from the same source. If they are stored in multiple independent locations, they are inevitably going to get out of sync, which, in turn, would lead to failures or poor performance. Extraction and distribution of shared parameters should not necessarily happen at runtime, on the contrary, it may be preferable to perform this during startup or build phases in order to comply with “fail early” principle.

For example, an URDF / SDF model of a robot can be the source of its total mass and geometric dimensions.

Separate logic from interfaces

Separate software logic from interfaces, both human and API:

• Interfaces involve potentially heavy I/O.
• They introduce dependencies on third party components, making it difficult to test, migrate, and evolve the core functionality.
• Sometimes, interfaces are not necessary for normal operation, e.g., debugging helpers, but may still introduce critical bugs.

For example, if your node receives a path, do not generate visual debugging data, such as ROS markers for rviz, in the same node; but rather create an independent node that would also subscribe for the path and generate necessary visualization info.

Project bootstrapping

There are a few things that should be done first when starting a new project.

Infrastructure first

• Prepare templates for new packages, source code files, copyright notice, etc.

• Bring up build and development infrastructure: CI, version control system.

• Integrate static / dynamic analysis tools before starting coding:

  • such tools are the most valuable at the early stages of development;

  • their late integration may require too much resources and is unlikely to be ever fully completed.

Simulation

Simulation is a crucial component for testing your system. All code should always be validated in simulation before deployment to save time and reduce risks. For this reason simulation must be implemented as soon as possible.

Integration tests

Integration tests are more important on early stages of development: a simple test that starts your system with a simulator and terminates immediately has more value than a single thoroughly unit-tested component. Integration tests focus your attention on the whole system rather than its parts. However, complex integration tests are difficult to maintain and are prone to become fragile on later stages of development, at which point you should support them with component specific tests.

Development

Programming languages

• Minimize the number of programming languages used in your system, this dramatically decreases maintenance costs, facilitates code reviews, improves code quality, etc.

• Even more importantly: don’t mix languages in the same software component, e.g., don’t execute python code from C++ code. It is better to implement it in the same language, even if it is not the default one for the system as a whole.

• Likewise, use the same version of compiler and language versions across-the-board.

• Stick to the default compiler version provided by your distribution (this is particularly true for C++): new language features are never worth the maintenance costs associated with integration of a custom compiler version.

• Compiled languages are usually preferable to interpreted languages: compilation is pretty much a mandatory static analysis step. Sometimes the only way to check validity of an interpreted program is to execute it, which is quite inconvenient.

Three elephants

• C++ is the main language for implementation of onboard components. Its flaws, such as complexity, bad syntax, and lack of fool-proofing, are well compensated by performance, expressive power, vast amount of development tools and reusable open-source libraries. C++ is also under active development currently, so it is catching up with new concepts relatively quickly.

• python is for off-board data processing and analysis, e.g., machine learning. Sometimes you can use other languages for this purpose, but python’s wide adoption and the number of 3rd party libraries makes other choices impractical. python is also often used for scripting, but I strongly believe that shell is a better alternative for such use cases.

• shell / make are often overlooked, but are perfect for various automation tasks, such as running tests in bulk, handling files and directories, etc.

  • The main power of shell is not in the language itself, but in various utilities that help to address your tasks in a much more expressive way than any scripting language: sed, xargs, grep, cut, sort, etc.

  • One can argue that make functionality is covered by shell scripts, but in my opinion it allows to achieve the same goals in a cleaner and more concise way.

  • Young developers often see make as a deprecated build tool, which is wrong -- it is a general purpose automation utility. It was not superseded by cmake or whatnot in this context.

  • There are a few modern alternatives to make such as https://github.com/go-task/task or https://github.com/casey/just.

  • Don't forget that /bin/sh is not the same thing as /bin/bash.

Version control

• Main branches, e.g., master, should be protected from direct pushes. The protection must include either review requirement or CI check, and should apply to repository owners as well.

• The main value of reviews is knowledge transfer in the team, both regarding the developed software system and programming in general.

Handling dependencies

• Dependencies should be installed using system binary packages. If a system package is outdated, suck it up and use it anyway unless there are dangerous flaws that directly affect your application.

• If a system package does not exist or unusable, consider other options: 3rd-party package repositories, vcpkg, conan. For new projects nix and guix should be considered first. However, it may be more convenient to build a package by yourself to handle dependencies consistently.

• ROS development is usually performed in workspaces (http://wiki.ros.org/catkin/workspaces), where you can work with multiple packages coming from various version control systems or tarballs. There exist several tools for building packages in workspaces taking dependencies into account: catkin_make (consider it to be deprecated), catkin_tools, colcon. wstool and vcstool help to manage code sources and versions. I find the ‘workspace’ approach to be very convenient, but it may require injection of package meta-information in non-ROS packages to handle dependencies properly (the process is sometimes referred to as catkinization). A description of the process can be found at http://wiki.ros.org/ROS/Tutorials/catkin/CreatingPackage -– it boils down to adding package description in package.xml file and optional special commands in CMakeLists.txt.

• You can also incorporate dependencies into your packages in several ways, all of which are inferior to workspaces, but may be needed, e.g., to perform non-invasive catkinization:

  • git submodules are not too bad, but depend on external repositories which makes them fragile and difficult to fork. Also, they are not handled by git transparently, so you have to remember to do recursive fetch, etc.

  • cmake external projects should never be used -– in addition to being fragile as git submodules, they are difficult to be used in the right way due to interface complexity, and introduce annoying build time limitations due to mixing of building and fetching phases.

  • Me personal favorite for addressing this task and the most robust approach is git read-tree, which allows to inject code directly into your project repository.

Build tools

cmake

cmake is probably the most common build tool for C++ projects. It may seem to be simple to use, but in my experience it is a wrong impression. Making the project portable, cross-compilable, usable as dependency, relocatable after installation, etc is tricky, especially due to tendency to half-ass cmake scripts: nobody bothers to study the meaning of parameters and their implications in different scenarios.

• My general advice regarding cmake is to keep scripts as simple as possible, the more logic you put in there the higher is the chance to mess something up. Most importantly, do not implement your own dependency management, such as conditional fetching & compilation of dependencies (been there, did that https://github.com/asherikov/ariles/blob/head_2/CMakeLists.txt), offload depedency management to other tools, such as package managers, colcon, etc.

• If you can avoid cmake option by creating an additional package – do it.

• Do not output autogenerated files to the source directory – use binary directory instead in order to avoid conflicts, permission issues, maintaining gitignore files.

Continuous integration

• Continuous integration is often perceived as an isolated environment, which leads to poor design choices in its implementation. Literally all tasks performed in CI, must also be performed manually during development: compilation. testing, static/dynamic analysis, binary package generation, etc. Hence, you should implement a development environment which supports those operations and then build CI based on it. A notable example is https://github.com/asherikov/ccws.

• Do not use CI pipelines for scripting -– all essential functionality must be performed in a generic scripting language to facilitate migration between different CI systems.

• It is usually beneficial to treat service failures differently in CI and in deployment: in the first case we want to detect such situations to be able to fix them, in the second we want the system to recover.

• Test failures in CI can be handled in two ways:

  • testing continues in order to collect results for all tests, which is good for periodic, e.g., nightly, jobs;

  • testing stops immediately, which is preferable for merge request tests since the author receives feedback as soon as possible; in this case it is also useful to arrange tests so that the quick ones are executed first.

Deployment

Deployment can be divided into three stages:

1. system image generation;
2. system configuration;
3. binary package deployment.

At this point docker is perceived as the way to go, but keep in mind that it covers only the third stage and has other drawbacks. Binary packages, however, for example Debian packages, can address the second stage as well using embedded installation scripts.

Test deployments

Development of robotic systems usually requires quick deployments of packages for testing. A common approach to address this task in ROS environment is to perform a plain copy of locally compiled packages to a target machine, e.g., from a workspace installation directory. This method does not facilitate tracking of deployments, which may become a significant issue when the target is shared by many developers. It is, however, even more inconvenient to perform binary package releases for this purpose –- the ROS buildfarm system is not designed for this, which is, in my opinion, a direct consequence of treating this task as non-interactive and “pure-CI”. I’ve tried to address it in https://github.com/asherikov/ccws by allowing developers to generate binary packages locally.

Documentation

• Document your classes, methods, and source files using doxygen http://www.doxygen.org/. There are a some alternatives, e.g. https://github.com/cppalliance/mrdocs, https://github.com/NaturalDocs/NaturalDocs, https://github.com/hdoc/hdoc, https://github.com/vovkos/doxyrest, https://github.com/copperspice/doxypress, but they do not seem to be significantly better than doxygen ATM.

• Each repository must contain a README.md file with a brief description of its purpose.

• Diagrams are often useful or necessary to understand internals of a system. Classical “industrial” approach to software development implies that you design a system by drawing diagrams first and then translating them to actual code, ideally with some automatic code generation tool. I find this method to be rather inconvenient: I am much more efficient while working with code or text in general rather than graphics. Moreover, it is more difficult to keep design diagrams in sync with implementation. For these reasons, I prefer tools that extract information from the code, e.g., doxygen. Another interesting example is https://github.com/boost-ext/sml which allows generation of finite state machine diagrams from their C++ implementations.

Source management

git

• Some branch naming conventions require using slashes in branch names, e.g., bugfix/..., which is a bad idea, since branch names are likely to be reused for other purposes, e.g., docker tags, and might require extra work to escape or replace them. Make your life easier by not making it harder, stick to letters, numbers, dashes, and underscores.

Runtime failures

Out of memory (OOM)

• Linux (at least Ubuntu) does not handle OOM well by default https://bugs.launchpad.net/ubuntu/+source/linux/+bug/159356, so you have to take extra measures to avoid such situations and protect your system from freezes.

Segmentation fault

• An important property of segmentation fault is that it is generally non-recoverable: if your program tried to write to someone else’s memory, it is quite likely that it has already trashed its own memory.

A note on return status

• If your application was terminated by a signal, the return code indicates the signal code, e.g., -6 corresponds to SIGABRT and usually indicates an exception in C++ code, -9 –- SIGSEGV. If exit code is unsigned, e.g., 134, subtract 128.

Races

In my experience races are quite common and particularly difficult to debug: a service behavior may depend on states of multiple other services, hardware components, etc, in which case it is necessary to be extra cautious when responding to changes in these states and avoid implicit assumptions on the sequence of their appearance.

Algorithms and data structures

Performance

• Performance optimization is often focused on computational complexity of algorithms, i.e., the mount of resources required to run them (https://en.wikipedia.org/wiki/Computational_complexity). In practice, it is usually a bad approach when you work with non-trivial data: the type of resources and access to them are much more important. Pay attention to memory access and especially I/O. For example, loading a geographic model from a file every time you perform a coordinate conversion is not going to be a good solution no matter how much you reduce the number of conversions.

• Legacy algorithms often measure their complexity in number of single floating point operations. Modern hardware is actually much better at performing arithmetic operations in bulk due to vectorization instructions, e.g., see https://eigen.tuxfamily.org/index.php?title=FAQ#Vectorization. For this reason, brute-force algorithms that use plain linear algebra may perform better than classic algorithms containing loops, conditionals, and recursion. Note that interpreted languages, such as Matlab and python, can also benefit from matrix-based operations for slightly different reasons https://www.mathworks.com/help/matlab/matlab_prog/vectorization.html.

Volumetric data

OcTree (https://octomap.github.io/) is commonly used for representation of volumetric data, but it is not always a good solution:

• when you build a map based on readings from range sensors such as lidars don’t expect to benefit from tree pruning of occupied cells -– the scans give you a thin surface of objects, so the tree leafs cannot be merged together;

• in terms of performance OcTree is inferior to VDB (https://www.openvdb.org/);

• OcTrees, however, are useful when you need to work with different resolutions of the same map, this structure naturally supports such slicing.

Rotations / orientations

There are multiple ways to represent rotations. Some people claim than quaternion is always the right thing to use – they are wrong.

Euler angles

• Euler angles are bad, you should always avoid them, but there is one exception: user interfaces. Euler angles are more intuitive than other representations and are good enough for simple orientations like ‘pitch forward by 30 degrees’.

• Stick to roll-pitch-yaw convention (RPY) to minimize confusion. Be careful when using third party software, sometimes it uses mislabeled YPR convention.

Rotation matrices

• Rotation matrices are very handy when you need to construct rotation using basis vectors or vice versa.

• Application of rotations using matrices may be faster than using quaternions, since it is a plain matrix multiplication.

• Rotation matrices have redundant variables and therefore tend to accumulate numerical errors.

Angle-axis

• Convenient complement for rotation matrices when you need to rotate a frame by a certain angle along specific axis.

Quaternions

• Should be used by default.

Coordinate systems

Geodetic coordinates

• Do not use LLA abbreviation for geodetic coordinates – it is ambiguous since both Lat-Lon and Lon-Lat orders are common in practice.

• There are two commonly used altitude measurements: with respect to the mean sea level, and to the WGS84 ellipsoid. Mean sea level (MSL) is more fragile and computationally expensive due to sea level determination logic. Ellipsoid altitude should be preferred in practice.

Date, time, and locale

• Dates must always be specified in YYYY-MM-DD format in order to facilitate sorting, e.g., 2018_10_02. Pad months and days with zeros when necessary. While we are on this topic we should also mention absurd MM-DD-YYYY convention and make fun of people who use it.

• Time zones and summer/winter time transitions can be confusing, for this reason I am inclined to use UTC time in deployment.

• 24h, aka ‘military’, time format is easier to read and parse and should always be preferred to a.m./p.m. convention.

• Use integers instead of floats for storing timestamps: time is inherently discrete in computer systems, and, more importantly, floating point precision varies depending on the magnitude.

• Don’t forget that some data, including dates and floats, is sometimes automatically formatted during I/O in accordance with system locale. For example, French locale uses comma to separate decimal part of floating point numbers instead of dot, which leads to funky issues like this zeux/pugixml#469. To be on a safe side, enforce C (POSIX) locale in deployment and while performing formatted I/O.

Protocols and serialization

• Do not use 32-bit floats for storing geodetic coordinates, this leads to a substantial, a couple of meters, errors simply due to representation limits. If memory usage is a concern, use 32-bit integers instead to get much smaller and uniform errors.

• Do not store UUID as string – weirdly enough it is a common thing, each UUID is 128 bit long label (https://en.wikipedia.org/wiki/Universally_unique_identifier) and should be stored like that.

General style policies

Naming

Ordering numbers

• Start numbering with 0.

• Pad numbers with zeros: 001, not 1.

Filenames

• Numbers in filenames should be strictly increasing, don’t fill the gaps when adding new files in order to avoid naming collisions in repository history. For example, if there are test_005 and test_010, a new test must be named test_011.

• Avoid all punctuation symbols except -, _, and .. Other symbols often have to be escaped in the command line and break word auto-selection logic in terminals.

• Filenames should be all lowercase with dashes or underscores as word separators.

Hierarchies

• Names are often organized in hierarchies: namespaces, field names in YAML or JSON files, filenames in directories, etc. It is a common stylistic mistake to duplicate parent names in child names, e.g., namespace logger { class LoggerParameters; }. This repetition is redundant and should be avoided: namespace logger { class Parameters; }. Another example is ROS convention of subdirectory naming in robot description repositories, e.g., https://github.com/ros-naoqi/pepper_robot, where each subdirectory includes redundant robot name. Yes, the reason is to match directory and package names, but practical value of this convention is next to zero.

Versions

• Classic three numbers or dates are ok, code names as used by ROS are not: most developers are not native English speakers –- remembering these names (I literally had to check eloquent in a dictionary) and their alphabetical ordering is by no means easier than numbers.

Prefix

• Names often include prefixes that narrow scope left to right. The general goal is to indicate a specific subsystems the named object belongs to in a non-ambiguous, but concise way.

• Choose a company name prefix, e.g., ‘mcy’ for ‘mycompany’, and use it consistently when needed to identify your packages, code, variables, etc. Try to pick something that is unlikely to lead to a naming collision.

Other

• Usage of abbreviations in any names should be avoided.

• Don’t waste your time on renaming things in accordance with the current political agenda. This is just sad.

Formatting

• Configure your text/source editor to drop trailing whitespaces to avoid polluting repository history and noisy diffs.

• Use tabulations only if required, e.g, in makefiles. There is a special place in hell for people who mix tabs and whitespaces for indentation.

• Formatting of human-readable files should never favor horizontal or vertical space preservation over readability: separate logical blocks with multiple empty lines and/or comments, add extra linebreaks and whitespaces, etc.

• Use 4 spaces for indentation: 2 is not enough, 8 is too much, anything else is a perversion.

• When editing files try to minimize the number of affected lines – this makes diffs more compact and readable. There are certain formatting conventions that can be helpful, e.g., when multiple parameters are passed to a function each of them, as well as the closing brace, should be on separate lines.

Use tools

• If your conventions are not enforced with some autoformatter or linter they are inevitably going to be broken.

• Compile and lint your code and files with all warnings enabled and treat warnings as errors, otherwise they are useless. There can be exceptions for specific warnings of course. Counterarguments like “-Werror Introduces a Toolchain Dependency” (https://embeddedartistry.com/blog/2017/05/22/werror-is-not-your-friend/) are weak, instead of dropping -Werror enforce language standard and test with all supported toolchains.

Do not abuse tools

• LLM-based code auto-completion tools, such a GitHub Copilot are quite good at generating boilerplate comments. The value of such comments, however, is often next to zero. Do not pollute your sources with comments like /* vector of integers */, they are not only useless and distracting, but may also be misleading if they get out of sync with the code.

Coding styles

Follow common styles

C++

• https://google.github.io/styleguide/cppguide.html
• http://isocpp.github.io/CppCoreGuidelines/CppCoreGuidelines
• http://www.stroustrup.com/JSF-AV-rules.pdf
• https://github.com/janwilmans/guidelines
• https://github.com/cpp-best-practices/cppbestpractices
• https://wiki.sei.cmu.edu/confluence/pages/viewpage.action?pageId=88046682

Don’t follow styles literally

Even widely accepted conventions are sometimes inconvenient or dangerous, such as double space indentations or usage of auto. Ignore non-compromising zealots that defend bad practices because “our father did it that way” or “this is the modern style”.

General rules

• Function names, variable names, and filenames should be descriptive; avoid abbreviation. Types and variables should be nouns, while functions should be “command” verbs, e.g., openFile().

• Prefixes are usually more apparent than suffixes, so the former is preferred in special names, e.g., g_global_variable instead of global_variable_g.

• Minimize scope of entities –- that improves your code granularity and makes it easier to maintain.

• Structurize data: Sometimes, you may see code where multiple independent variables are stacked in a single vector, e.g., position and orientation. Such style must not be allowed in modern C/C++/python code. Use classes or structures with appropriately named members instead, if not possible –- implement wrappers.

• Avoid multipurpose variables, e.g., a variable to store time or flag. This is a well known, but still recurring anti-pattern.

Hungarian notation

I am generally against any conventions that cannot not be automatically validated and are fully reliant on developer, including https://en.wikipedia.org/wiki/Hungarian_notation. There are, however, several cases when indicating the kind of variable, type, or function may be useful:

• Indicating global variables with g_ prefix – they should generally be avoided and used with care.

• Indicating template types and variables with t_ prefix – in order to emphasize objects that vary in different instantiations and may require additional hints for the compiler, e.g., typename, template.

• Indicating measurement unit of a parameter with a suffix (s for second, m for meter, etc). There are various options to disambiguate units in the code, but values loaded from configuration files often need clarification.

C++

General rules

• Enforce language standard using corresponding compiler flag. Don’t use standard extensions.

• Dependency on Boost is almost inevitable in large projects, don’t try to fight it by integrating newer compiler with the latest standard support. Don’t forget that unlike STL you can cut out parts of Boost if necessary.

• Avoid paradigm mixing: C++ is primarily an object oriented language, don’t try to turn it into something else. If you find yourself implementing a 30-line long method inside a return statement of a lambda function that returns another lambda function you have made a few wrong turns.

Fundamental (built-in) types

• In general, there is no reason in trying to optimize something by being smart with integer types, e.g., using short type, or uint8_t. STL actively uses std::size_t for unsigned integers and std::ptrdiff_t for signed integers, so those should be the default integer types.

• The same applies to floating point numbers, e.g., use double unless float is really necessary.

• If you need custom integer types use those that are explicit regarding their size and sign, e.g., uint16_t.

Type names

• Type names (classes, structures, typedefs, and enumerations) start with a capital letter and have a capital letter for each new word, with no underscores: MyExcitingClass, MyExcitingEnum.

Enumerations

• Names of the enumerators should be in upper case with underscores.

• Do not use global variables or defines in order to represent logically related values –- always use an enumeration in such cases.

• All enumerations must be defined within some container class scope. It is recommended to use some wrappers, e.g, http://aantron.github.io/better-enums/.

• The general rule for handling enumerations is to use a switch: known values should be handled as needed, all unknown values must be captured by default case and result in a failure. This approach ensures that any future extensions of the enumeration are going to result in failures which are easy to detect and fix. For example:

  BETTER_ENUM(DroneStatus, int, UNDEFINED = 0, INACTIVE, FLIGHT)

  DroneStatus status = DroneStatus::UNDEFINED; switch(status) { case DroneStatus::INACTIVE: break;

  case DroneStatus::FLIGHT: break;

  case default: throw(); }

Variables

• Variable names are all lowercase, with underscores between words, i.e., my_table_name.

• Global variables must be avoided. If it is not possible, their names must have g_ prefix, e.g., g_my_global_variable.

Functions and methods

• Functions should start with a lowercase letter and have a capital letter for each new word without underscores.

• Parameters which do not serve as outputs must be const.

• Input parameters must be passed by reference unless their type is fundamental: integral, floating point, or void, see https://en.cppreference.com/w/cpp/language/types.

• Output parameters must be gathered at the end of the parameter list: doSomething(input1, output1, output2, input2 = <default_value>).

• Avoid passing a value as a function parameter, use a variable instead, or add a comment, e.g., doSomething(/*verbose*/ false).

Classes

• It is not allowed to mix definitions with different access modifiers, i.e., methods and members with the same access modifier should be gathered together.

• It is recommended to use access modifiers multiple times to visually group members or methods.

• Names of member variables should have trailing underscores, i.e., member_name_.

• Methods, which do not change the corresponding class, must always be marked with const.

• In general, destructors of base classes must be defined and must be protected. If it is necessary to allow polymorphic destruction, the destructor should be defined as public and virtual.

• Constructors of base classes should be protected as well.

• Avoid implementing complex initialization in class constructors, use initialize() methods instead:

  • If constructor accepts dynamic parameters it may force using pointers for its instantiation, which is a good approach in some cases, but in my experience this it is a bad practice to enforce this pattern on developers –- let them choose how to instantiate classes.

  • Templated constructors do not allow explicit parameter specification -- templated parameters must be deduced from constructor inputs.

• Many common styles and static analysis tools insist on initialization of member variables on declaration and in member initializer lists of constructors when possible, which is obviously not always the case. When such conventions are enforced you end up with member initialization logic scattered all over the place. In my opinion a dedicated initialization method called from a constructor is the most transparent approach.

Macro

• If macro can help you to reduce code verbosity and avoid repetition, you should use it unless there is another way to achieve the same results. Banning macro completely, especially in third party libraries, is simply retarded. Copy-pasting is a much bigger sin than presumable obscurity introduced by macro.

• Macro name must be in all capitals with underscores and have a prefix to avoid collisions, e.g., MYCOMPANY_DEBUG.

• If you have a macro that enables / disables debugging, make it numeric in order to have finer control over debugging level, e.g.,

  • greater than 0: enables printing/generation of extra debug data, usually, at the expense of performance.

  • greater than 10: disables recovery behaviors, i.e., services are going to crash rather than recover in some cases, which is easier to detect in tests.

Namespaces

• Names of namespaces should be in lower case with possible underscores.

• Minimize scope of using namespace ... directives, never use them in public header files.

• All your code must be enclosed in mycompany namespace.

• As a rule of thumb, source code in a particular package should be additionally enclosed in a corresponding namespace. For example, code in mypackage should be in mycompany::mypackage namespace.

• Omit leading namespaces when possible and reasonable, e.g., mypackage::doSomething(...) instead of mycompany::mypackage::doSomething(...).

Templates

• Names of template parameters should follow the same conventions as the category they belong to (typenames, variables), but their names must include t_ prefix: t_BaseClass, t_integer_variable.

Header guards

• Although #pragma once is not part of the standard, it is widely supported and is more concise and less error-prone than classic header guards (#ifndef ... #define ... #endif).

Avoid auto

auto can break semantics of your program without breaking its syntax. Consider the following program using Eigen:

#include <iostream>
#include <Eigen/Core>

namespace
{
Eigen::Matrix3d getRandomSymmetricMatrix()
{
    Eigen::Matrix3d m = Eigen::Matrix3d::Random();

    return (m.transpose() * m);
}

Eigen::Matrix3d getRandomSymmetricMatrix2()
{
    auto m = Eigen::Matrix3d::Random();

    return (m.transpose() * m);
}
}

int main()
{
std::cout << getRandomSymmetricMatrix() << std::endl << std::endl;
std::cout << getRandomSymmetricMatrix2() << std::endl;

return (EXIT_SUCCESS);
}

Example output:

  1.22374 -0.234887  0.579107
-0.234887  0.994478 -0.659169
 0.579107 -0.659169   1.07338

-0.482262  0.839256 0.0753774
 -1.02165 -0.202315  0.942273
  0.15891  -0.84441  0.247298

Note that output of the second function is wrong, the reason for that is that Random() returns a random matrix generator rather than a matrix, so the second function returns a product between two different matrices generated on spot. Such errors cannot be detected by compiler or sanitizers, since the code is 100% correct. They are also difficult to pick up by reading the code – you have to know how Eigen API works and what to look for. Even though the issue is well known and documented https://eigen.tuxfamily.org/dox/TopicPitfalls.html#title3 developers following the ‘modern’ style fall for it over and over, e.g.

• https://stackoverflow.com/questions/59586537/eigen-gives-wrong-result-when-not-storing-intermediate-result
• https://stackoverflow.com/questions/55962829/eigen-c-how-can-i-fixed-the-values-after-a-random-matrix-initialization

Another possible side-effect of using auto with Eigen is performance degradation: auto mat3 = mat2 * mat1 here mat3 is an expression rather than a result of multiplication – it is going to be reevaluated every time it is used in the code.

Sometimes auto is encouraged to avoid typing long typenames, e.g., std::map<std::string, std::pair<int, std::string>>::const_iterator. This is a wrong solution to this problem:

• you should always define proxy types to encapsulate name complexity, e.g., using MyMap = std::map<std::string, std::pair<int, std::string>>, which allows to simply write MyMap::const_iterator and significantly improves code readability;

• in modern C++ you can also avoid using iterators explicitly in many cases.

This brings us to another important point: type is documentation which is automatically verified and enforced by compiler. Type omission makes the code more difficult to comprehend, e.g., consider an example from http://isocpp.github.io/CppCoreGuidelines/CppCoreGuidelines

auto hello = "Hello!"s; // a std::string
auto world = "world"; // a C-style string

C++ is a language where the difference between std::string and C-style string can be important, so we should avoid obscuring such details.

Package conventions

Naming

• Package naming convention can be surprisingly difficult to agree on and can hardly be universal:

  • Should a robot name precede package type or otherwise, i.e., robot_model or model_robot?

  • If version control system supports grouping of packages in folders, such as GitLab, should the groups be included in the package name?

  • Should the name indicate a programming language used in package? Is it possible that that would be necessary for disambiguation?

• ROS package naming conventions are a good starting point http://www.ros.org/reps/rep-0144.html.

Layout

• ROS1 catkin package template example https://github.com/asherikov/ccws/tree/master/pkg_template/catkin

• Public headers must be located in include/mypackage/ subfolder. Non-public headers should be kept together with source files in src.

Installation paths

• Read man pages for hier and systemd-unit, conventions may vary slightly depending on distribution.

• Don’t put your headers in the root of **/include/ folders, it is like peeing in public. Always use package specific subdirectories.

Networking

TCP

Sometimes TCP may seem to be a good choice for critical real-time data transfer since it doesn’t lose data. However, a better design choice is to embrace possible data loss and build a system that can tolerate it. Moreover, there are important implementation details in TCP that need to be kept in mind:

• Bufferization logic is more complicated and slower than in UDP, but, more importantly, transferring buffer may accumulate small independent packets to be sent in bursts. For example, if an application sends small telemetry packets such as GPS coordinates or encoder data at high frequency, they may stick together and arrive to the receiving application in small groups at lower frequency. See TCP_NODELAY in man tcp for a workaround.

• Networking stack takes measures to prevent conflicts between TCP sessions, in particular a side that initiated session termination blocks corresponding socket in TIME_WAIT state https://serverframework.com/asynchronousevents/2011/01/time-wait-and-its-design-implications-for-protocols-and-scalable-servers.html Default timeout on Linux for this state is 60 second, i.e., under certain circumstances you won’t be able to reestablish a TCP connection for a whole minute, which is more than enough to be fatal in robotic applications. SO_REUSEADDR socket option may be helpful for alleviating this issue.

Fixing robot models

Inertia

Ironically some commercial CAD systems incorrectly export inertia matrices of rigid bodies to URDF, so it is a good idea to verify them. One way to achieve this is to perform eigendecomposition of the matrix https://en.wikipedia.org/wiki/Moment_of_inertia#Principal_axes to obtain principal axes and moments of inertia, which can be used to specify orientation and extent of a rectangular cuboid. Obtained cuboid should roughly match visual representation of a rigid body.

Other

ROS

• Try to follow standard ROS conventions listed at http://www.ros.org/reps/rep-0000.html

• Avoid scripting in launch files: if and unless attributes, python code injection.

Telemetry

• Collect telemetry from everywhere: robots, servers, workstations, etc. It pays off in long term.

• Standard Linux / UNIX telemetry tools are usually not meant to handle data at sub-second resolution, so you are going to need a custom solution for robotic applications.

• Must have: grafana, PlotJuggler.