Sensor Community Enclosure

3D printed version of a Sensor.Community Air Sensor enclosure.

Introduction

This repository contains the parts and assembly instructions for creating my version of the Sensor.Community Air Sensor. This sensor uses a relativly cheap PM2.5/PM10 sensor, to measure the air quality. This data is then shared with Sensor.Community and other instances, to keep track of the (local) air quality.

Features

• 3D printed parts (for the specific enclosure I used, +/- 80x120 mm)
• Rigid mounting with additional weatherproofing
• Air quality, temperature and GPS (location and altitude)

Contents

• The 3d/ folder contains a 3D-printable designs for the necessary parts.
• The firmware/ folder contains a compiled version of the Airrohr firmware I used (added for archiving reasons).
• The images/ folder contains several pictures of the assembled sensor.

Instructions

Printing, assembly and flashing instructions can be found in Instructions.md.

License

The work in this repository is covered by CC BY-NC-SA 4.0. See the LICENSE.md file for more information.

Some parts of this project are covered by a different license.