Skip to content

beldmit/oqs-provider

 
 

Repository files navigation

GitHub actions GitHub actions GitHub actions oqs-provider

oqsprovider - Open Quantum Safe provider for OpenSSL (3.x)

Purpose

This repository contains code to enable quantum-safe cryptography (QSC) in a standard OpenSSL (3.x) distribution by way of implementing a single shared library, the OQS provider.

Status

Currently this provider fully enables quantum-safe cryptography for KEM key establishment in TLS1.3 including management of such keys via the OpenSSL (3.0) provider interface and hybrid KEM schemes. Also, QSC signatures including CMS and CMP functionality are available via the OpenSSL EVP interface. Key persistence is provided via the encode/decode mechanism, X.509 data structures, and PKCS#12 for bundling a private key with its corresponding X.509 certificate. Starting with OpenSSL 3.2 support for TLS1.3 signature functionality is available and final glitches for CMS have been resolved.

The standards implemented are documented in the separate file STANDARDS.md.

Algorithms

This implementation makes available the following quantum safe algorithms:

KEM algorithms

  • BIKE: bikel1, p256_bikel1, x25519_bikel1, bikel3, p384_bikel3, x448_bikel3, bikel5, p521_bikel5
  • CRYSTALS-Kyber: kyber512, p256_kyber512, x25519_kyber512, kyber768, p384_kyber768, x448_kyber768, x25519_kyber768, p256_kyber768, kyber1024, p521_kyber1024
  • FrodoKEM: frodo640aes, p256_frodo640aes, x25519_frodo640aes, frodo640shake, p256_frodo640shake, x25519_frodo640shake, frodo976aes, p384_frodo976aes, x448_frodo976aes, frodo976shake, p384_frodo976shake, x448_frodo976shake, frodo1344aes, p521_frodo1344aes, frodo1344shake, p521_frodo1344shake
  • HQC: hqc128, p256_hqc128, x25519_hqc128, hqc192, p384_hqc192, x448_hqc192, hqc256, p521_hqc256
  • ML-KEM: mlkem512, p256_mlkem512, x25519_mlkem512, mlkem768, p384_mlkem768, x448_mlkem768, x25519_mlkem768, p256_mlkem768, mlkem1024, p521_mlkem1024, p384_mlkem1024

Signature algorithms

  • CRYSTALS-Dilithium:dilithium2*, p256_dilithium2*, rsa3072_dilithium2*, dilithium3*, p384_dilithium3*, dilithium5*, p521_dilithium5*

  • ML-DSA:mldsa44*, p256_mldsa44*, rsa3072_mldsa44*, mldsa44_pss2048*, mldsa44_rsa2048*, mldsa44_ed25519*, mldsa44_p256*, mldsa44_bp256*, mldsa65*, p384_mldsa65*, mldsa65_pss3072*, mldsa65_rsa3072*, mldsa65_p256*, mldsa65_bp256*, mldsa65_ed25519*, mldsa87*, p521_mldsa87*, mldsa87_p384*, mldsa87_bp384*, mldsa87_ed448*

  • Falcon:falcon512*, p256_falcon512*, rsa3072_falcon512*, falconpadded512*, p256_falconpadded512*, rsa3072_falconpadded512*, falcon1024*, p521_falcon1024*, falconpadded1024*, p521_falconpadded1024*

  • SPHINCS-SHA2:sphincssha2128fsimple*, p256_sphincssha2128fsimple*, rsa3072_sphincssha2128fsimple*, sphincssha2128ssimple*, p256_sphincssha2128ssimple*, rsa3072_sphincssha2128ssimple*, sphincssha2192fsimple*, p384_sphincssha2192fsimple*, sphincssha2192ssimple, p384_sphincssha2192ssimple, sphincssha2256fsimple, p521_sphincssha2256fsimple, sphincssha2256ssimple, p521_sphincssha2256ssimple

  • SPHINCS-SHAKE:sphincsshake128fsimple*, p256_sphincsshake128fsimple*, rsa3072_sphincsshake128fsimple*, sphincsshake128ssimple, p256_sphincsshake128ssimple, rsa3072_sphincsshake128ssimple, sphincsshake192fsimple, p384_sphincsshake192fsimple, sphincsshake192ssimple, p384_sphincsshake192ssimple, sphincsshake256fsimple, p521_sphincsshake256fsimple, sphincsshake256ssimple, p521_sphincsshake256ssimple

  • MAYO:mayo1*, p256_mayo1*, mayo2*, p256_mayo2*, mayo3*, p384_mayo3*, mayo5*, p521_mayo5*

As the underlying liboqs at build time may be configured to not enable all algorithms, it is advisable to check the possible subset of algorithms actually enabled via the standard commands, i.e., openssl list -signature-algorithms -provider oqsprovider and openssl list -kem-algorithms -provider oqsprovider.

In addition, algorithms not denoted with "*" above are not enabled for TLS operations. This designation can be changed by modifying the "enabled" flags in the main algorithm configuration file.

In order to support parallel use of classic and quantum-safe cryptography this provider also provides different hybrid algorithms, combining classic and quantum-safe methods. There are two types of combinations: The Hybrids are listed above with a prefix denoting a classic algorithm, e.g., for elliptic curve: "p256_". The Composite are listed above with a suffix denoting a classic algorithm, e.g., for elliptic curve: "_p256".

A full list of algorithms, their interoperability code points and OIDs as well as a method to dynamically adapt them, e.g., for interoperability testing are documented in ALGORITHMS.md.

Building and testing -- Quick start

All component builds and testing described in detail below can be executed by running the scripts scripts/fullbuild.sh and scripts/runtests.sh respectively (tested on Linux Ubuntu and Mint as well as MacOS).

By default, these scripts always build and test against the current OpenSSL master branch.

These scripts can be configured by setting various variables. Please note that these scripts do not install oqsprovider. This can be facilitated by running cmake --install _build (and following the activation instructions.

Building and testing

The below describes the basic build-test-install cycle using the standard cmake tooling. Platform-specific notes are available for UNIX (incl. MacOS and cygwin) and Windows.

Configuration options

All options to configure oqs-provider at build- or run-time are documented in CONFIGURE.md.

Pre-requisites

To be able to build oqsprovider, OpenSSL 3.0 and liboqs need to be installed. It's not important where they are installed, just that they are. If installed in non-standard locations, these must be provided when running cmake via the variables "OPENSSL_ROOT_DIR" and "liboqs_DIR". See CONFIGURE.md for details.

Basic steps

cmake -S . -B _build && cmake --build _build && ctest --test-dir _build && cmake --install _build

Using

Usage of oqsprovider is documented in the separate USAGE.md file.

Note on OpenSSL versions

oqsprovider is written to ensure building on all versions of OpenSSL supporting the provider concept. However, OpenSSL still is in active development regarding features supported via the provider interface. Therefore some functionalities documented above are only supported with specific OpenSSL versions:

3.0/3.1

In these versions, CMS functionality implemented in providers is not supported: The resolution of openssl/openssl#17717 has not been not getting back-ported to OpenSSL3.0.

Also not supported in this version are provider-based signature algorithms used during TLS1.3 operations as documented in openssl/openssl#10512.

Also not fully supported in 3.0.2 is performance testing as per the openssl speed command as documented in #385.

3.2 and greater

These versions have full support for all TLS1.3 operations using PQ algorithms when deploying oqsprovider.

All versions

A limitation present in older OpenSSL versions is the number of default groups supported: At most 44 default groups may be specified , e.g., passing to SSL_CTX_set1_groups. Therefore caution is advised activating all KEMs supported by oqsprovider: This may lead to openssl crashing, depending on the OpenSSL version used: The problem is gone in OpenSSL "master" branch and (will be gone) in the releases 3.3.0, 3.2.2., 3.1.6 and 3.0.14.

For general OpenSSL implementation limitations, e.g., regarding provider feature usage and support, see here.

Governance & Contributions

Project governance is documented in GOVERNANCE.md and contribution policy is documented in CONTRIBUTING.md.

Discussions

The policy of this project is that all discussions pertaining to changes in the functional and non-functional aspects of oqsprovider shall take place in github. References to external discussion fora are discouraged to retain the free and open flow of thoughts unencumbered by potentially differing or changing access or data retention policies by github-external chat forums.

Team

Contributors to the oqsprovider include:

  • Michael Baentsch (initial author and maintainer; responsible for all code except as listed per specific contributions below)
  • Christian Paquin (original OpenSSL111 OQS integrator)
  • Richard Levitte (OpenSSL provider wizard and initial cmake setup)
  • Basil Hess (hybrid KEM integration & pqcrystals/mayo OID management)
  • Julian Segeth (some memory management improvements)
  • Alex Zaslavsky (improvements on OpenSSL integration)
  • Will Childs-Klein (improvements on Kyber hybrid OIDs)
  • Thomas Bailleux (many build, CI and usage improvements for different platforms)
  • Felipe Ventura (composite sig integration and OID management)
  • Iyán Méndez Veiga (PKCS#12 testing)

History

Documentation on current and past releases ("code history") is documented in the separate file RELEASE.md.

Acknowledgments

oqsprovider came into existence as a branch of oqs-openssl as part of the OQS project initially led by Douglas Stebila and Michele Mosca at the University of Waterloo but split off to become a separate project catering to the OpenSSL provider concept. With OQS joining PQCA oqsprovider also was folded into that organization.

The oqsprovider project had been supported through the NGI Assure Fund, a fund established by NLnet with financial support from the European Commission's Next Generation Internet programme, under the aegis of DG Communications Networks, Content and Technology under grant agreement No 957073.

Financial support for the development of Open Quantum Safe had been provided by Amazon Web Services and the Tutte Institute for Mathematics and Computing.

The OQS project would like to make a special acknowledgement to the companies who had dedicated programmer time to contribute source code to OQS, including Amazon Web Services, evolutionQ, Microsoft Research, Cisco Systems, and IBM Research.

Research projects which developed specific components of OQS have been supported by various research grants, including funding from the Natural Sciences and Engineering Research Council of Canada (NSERC); see here and here for funding acknowledgments.

Disclaimers

Standard software disclaimer

THIS SOFTWARE IS PROVIDED WITH NO WARRANTIES, EXPRESS OR IMPLIED, AND ALL IMPLIED WARRANTIES ARE DISCLAIMED, INCLUDING ANY WARRANTY OF MERCHANTABILITY AND WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE.

Component disclaimer

liboqs disclaimer

About

OpenSSL 3 provider containing post-quantum algorithms

Resources

License

Code of conduct

Security policy

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • C 83.7%
  • Roff 5.4%
  • Python 4.9%
  • Shell 4.2%
  • CMake 1.6%
  • Ruby 0.2%