JIG v3.x - Jetstream Powered Admin CRUD Generator

Jetstream Inertia Generator a.k.a jig allows you to generate code for simple Admin CRUDs (Create, Read, UPdate, Delete) which are fully compatible with a Laravel Project powered by the Jetstream - Inertia - Vue.js Stack.

Scenario

You are developing a NextGen project. The data model is complex. It requires Many CRUDS managed by the admin in order to power the main end-user functionality. You don't want to spend Days or even Months writing boilerplate code for all the CRUDs. If that is you, this package comes to your rescue. Just follow these simple steps:

• Generate a Migration for your CRUD table, e.g articles, and run php artisan migrate (About 2 minutes)
• With this package, just run php artisan jig:generate articles (About 3 seconds!!!)
• Build your css and javascript (About 27 seconds) DONE! In about 2 and a half minutes, you get a fully working module consisting of -:

• Model
• Admin Controller - Index, Create, Show, Edit, Store, Update, Delete
• API Controller - Index, Store, Show, Update, Delete
• An Authorization Policy - viewAny, view, create, update, delete, restore, forceDelete
• Generated Permissions for spatie/laravel-permissions - articles, articles.index, articles.create, articles.show, articles.edit, articles.delete
• Frontend Menu entry
• Frontend Datatable with Actions thanks to Using Yajra Datatables and datatables.net
• Tailwindcss-powered CREATE and EDIT forms,
• Tailwindcss - powered SHOW view.
• web and API routes
• Validation and Authorization Request Classes

What more could you ask for? Cut a day's work down to less than 3 minutes.

Dependencies

If you have followed the Jetstream - Inertia - Vue.js Installation instructions, then the project will work with minimal configuration. Other Important dependencies that you MUST configure include:

1. Spatie Laravel Permissions - This is used to manage roles and permissions. Its migrations will be published during asset publishing, after which you can go ahead and configure the user trait.
2. Laravel Sanctum - Used to manage both API and stateful authentication. Since the whole app will be a Single Page Application, make sure you configure the middleware sanctum middleware in app/Http/Kernel.php as follows:

'api' => [
    \Laravel\Sanctum\Http\Middleware\EnsureFrontendRequestsAreStateful::class,
    ...
],

If you are using v2.x

NB: This documentation is for v3.x of JIG. If you are using v2.x, Access v2.x Docs Here

Before You Install:

• Ensure you have installed laravel/jetstream with inertia.

Installation

1. You can install the package via composer:

composer require savannabits/jetstream-inertia-generator

⚠️ 1. Before proceeding, ensure you have installed laravel/jetstream with inertia.

⚠️ 2. Step 1 will install spatie/laravel-permission. Ensure you have published migrations for this package to create roles and permissions tables before proceeding.

php artisan vendor:publish --provider="Spatie\Permission\PermissionServiceProvider"

💡 NB: The title field will be automatically added to the roles and permissions tables when the first CRUD is generated. :::

2. Install the necessary npm dev dependencies by running the following command: If you are using npm:

npm install --include=dev --legacy-peer-deps @headlessui/vue @inertiajs/inertia @inertiajs/inertia-vue3 @vitejs/plugin-vue pagetables popper.js @babel/plugin-syntax-dynamic-import dayjs dotenv numeral postcss postcss-import pusher-js laravel-echo laravel-vite sass sass-loader vite vue@^3.1 vue3-vt-notifications vue-flatpickr-component  vue-numerals mitt savannabits/vue-select#v4.0.0-alpha.0

Or if you are using yarn:

yarn add -D @headlessui/vue @vitejs/plugin-vue @inertiajs/inertia @inertiajs/inertia-vue3 pagetables popper.js @babel/plugin-syntax-dynamic-import dayjs dotenv numeral postcss postcss-import pusher-js laravel-echo laravel-vite sass sass-loader vite vue@^3.1 vue3-vt-notifications vue-flatpickr-component  vue-numerals mitt savannabits/vue-select#v4.0.0-alpha.0

Feel free to configure the color palette to your own preference, but for uniformity be sure to include primary,secondary, success and danger variants since they are used in the jig template.

3. Publish the Package's assets, configs, templates, components and layouts. This is necessary for you to get the admin layout and all the vue components used in the generated code:

Option 1 (Suitable for fresh installations)

php artisan vendor:publish --force --provider="Savannabits\JetstreamInertiaGenerator\JetstreamInertiaGeneratorServiceProvider"

Option 2 (Useful if you are upgrading the package or already have local changes you don't want to override.) NB: If you only want to update some published files, delete only the published files that you want to update, then run the appropriate command below:

php artisan vendor:publish --tag=jig-blade-templates #Publishes resources/views/app.blade.php. If it already exists, use --force to replace it
php artisan vendor:publish --tag=jig-config #Publishes the config file. If it exists use --force to replace it.
php artisan vendor:publish --tag=jig-routes #Publishes routes/jig.php to hold routes for generated modules.If you have already generated some routes, be sure to back them up as this file will be reset if you --force it.
php artisan vendor:publish --tag=jig-views #publishes Vue Components, app.js, bootstrap.js and Layout files. Use --force to force replace
php artisan vendor:publish --tag=jig-scripts #publishes main.ts and Layout files. Use --force to force replace
php artisan vendor:publish --tag=jig-css #publishes app.css. Use --force to force replace
php artisan vendor:publish --tag=jig-assets #publishes logos and other assets
php artisan vendor:publish --tag=jig-compiler-configs #publishes postcss.config.js,vite.config.js, tsconfig.json and tailwind.config.js
php artisan vendor:publish --tag=jig-seeders #Publish database Seeders

4. Add the JigMiddleware to the web middleware group in app/Http/Kernel.php:

protected $middlewareGroups = [
    'web' => [
        ...,
        \Savannabits\JetstreamInertiaGenerator\Middleware\JigMiddleware::class,
    ],
];

5. Allow First-Party access to the Sanctum API by adding the following to the api middleware group in app/Http/Kernel.php

protected $middlewareGroups = [
    'api' => [
        \Laravel\Sanctum\Http\Middleware\EnsureFrontendRequestsAreStateful::class,
        ...
    ],
];

6. Modify the .env to have the following keys:

APP_BASE_DOMAIN=mydomain.test
# or https
APP_SCHEME=http
#optional mix_app_uri (The path under which the app will be served. It is recommended to run the app from the root of the domain.
MIX_APP_URI= 
#If MIX_APP_URI is empty.
APP_URL=${APP_SCHEME}://${APP_BASE_DOMAIN} 
#If MIX_APP_URI is not empty.
#APP_URL=${APP_SCHEME}://${APP_BASE_DOMAIN}/${MIX_APP_URI}

# Append the following key to your .env to allow 1st party consumption of your api:
#You can add other comma separated domains
SANCTUM_STATEFUL_DOMAINS="${APP_BASE_DOMAIN}"

7. create the storage:link (See laravel documentation) to allow access to the public disk assets (e.g logos) via web:

php artisan storage:link

8. For v3 only, set the scripts in your package.json as follows:

"scripts": {
        "dev": "vite",
        "build": "vite build",
        "serve": "vite preview"
    },

9. Enable Profile Photos by uncommenting the following line in config/jetstream.php under 'features':

Features::profilePhotos(),

10. Run Migrations and Seeders

php artisan migrate
php artisan db:seed --class SeedAdminRoleAndUser

11. Now build the npm dependencies using vitejs:

yarn dev #Start the vitejs development server
yarn build #build assets for production

🚀 You are now ready to generate your CRUDs!🎉

Usage

The initial seeded admin user and role

When you run php artisan vendor:publish --tag=jig-migrations, a migration is published that creates an initial default user called Administrator and a role with the name administrator to enable you gain access to the system with admin privileges. The credentials for the user account are:

• Email: admin@savannabits.com
• Password: password

Use these creds after migration to login and explore all parts of the application

Create the Permissions, Roles and Users Modules first, in that order:

Run the following commands to generate the User Access Control Module before proceeding to generate your admin:

php artisan jig:generate:permission -f
php artisan jig:generate:role -f
php artisan jig:generate:user -f

You can now proceed to generate any other CRUD you want using the steps in the following section.

General Steps to generate a CRUD:

1. Generate and write a migration for your table with php artisan make:migration command.
2. Run the migration to the database with php artisan migrate command
3. Generate the Whole Admin Scaffold for the module with php artisan jig:generate command
4. Modify and customize the generated code to suit your specific requirements if necessary. __NB: If the crud already exists, and you would like to generate, you can use the -f or --force option to force replacement of files.

Example

Assuming you want to generate a books table:

php artisan make:migration create_books_table

• Open your migration and modify it as necessary, adding your fields. After that, run the migration.

php artisan migrate

• The Fun Part: Scaffold a whole admin module for books with jig using the following command:

php artisan jig:generate books #Format: php artisan generate [table_name] [-f]

NB: To get a full list of jig commands called under the hood and the full description of the jig:generate command, you can run the following:

php artisan jig --help
php artisan jig:generate --help

The command above will generate a number of files and add routes to both your api.php and web.php route files. It will also append menu entries to the published Menus.json file. The generated vue files are placed under the Pages/Books folder in the js folder.

• Finally, run yarn dev or yarn build to compile the assets. There you have your CRUD.

Roles, permissions and Sidebar Menu:

• By Default, generation of a module generates the following permissions:

  • index
  • create
  • show
  • edit
  • delete

• The naming convention for permissions is ${module-name}.${perm} e.g payments.index, users.create etc.

• This package manages access control using policies. Each generated module generates a policy with the default laravel actions:

  • viewAny, view, store, update, delete, restore, forceDelete The permissions generated above are checked in these policies. If you need to modify any of the access permissions, policies is where to look.

• Special permissions MUST also be generated to control access to the sidebar menus. These permissions SHOULD NOT contain two parts separated with a dot, but only one part.

• Menus are configured in a json file published at ./resources/js/Layouts/Jig/Menu.json.

  • For all menu items, the json key MUST match the permision that controls that menu. A permission without any verb is generated when generating each module for this very purpose. For example, generating a payments module will generate a payments permission. Then the menu for payments must have payments as the json key.
  • For parent menus and any other menus which may not match any module, you have to create a permission with the key name to control its access. For example, if you have a parent menu called master-data you have to generate a permission with the same name.

Testing

composer test

Changelog

Please see CHANGELOG for more information what has changed recently.

Contributing

Please see CONTRIBUTING for details.

Security

If you discover any security related issues, please email maosa.sam@gmail.com instead of using the issue tracker.

Credits

• Sam Maosa
• All Contributors

License

The MIT License (MIT). Please see License File for more information.