I'ld like to compile a 1M image for my Wemos D1 mini with some IR and sensors

[mircsicz]

Hi all,

I've read this discussion.

I started tesmocompiler with this compose.yml:

---
services:
  tasmo-compiler:
    image: benzino77/tasmocompiler
    container_name: tasmota
    restart: unless-stopped
    ports:
      - "3000:3000"
    environment:
      DEBUG: server,git,compile

Problem is I always get a 4M image and flashing that from WebIf I always get:

All I need are some I2C sensors and the MIRAGE and LG Protocols for IRHVAC

[Noschvie]

Did you try to use the minimal image as starting point?

[mircsicz]

Danke Dir Norbert, mit Tasmotizer gings...

[benzino77]

Hi Mirco,

The image which you've created is probably too big to upload it your device in one step. You have two options (I think):

1. Use minimal image, as Norbert already mentioned, and then upload your final image. It will be 2-step process then:

• upload minimal binary from https://ota.tasmota.com/tasmota/release/
• after that upload binary you build with TasmoCompiler (use rather .gzversion)

2. Use TasmoCompiler URL as the OTA address as described here Please build tasmota-minimal.bin.gz as well as tasmota.bin.gz #309

Caution

I've checked that I need to update minimal binary version on TasmoCompiler side, so you should rather not use the second option.
The version which is included with TasmoCompiler is for version v13 of Tasmota - I need to replace it with v14

[mircsicz]

Thanks @benzino77

I managed to flash it with Tasmotizer...

Now I only need to figure out which #define I was missing to get the IRsend & IRreceive commands ;-)

[Noschvie]

@mircsicz Did you have a look to:
tasmota-ir.bin provides almost all IRremoteESP8266 protocols.

[mircsicz]

Thanks Norbert, thats what I started with... Prob is this one is missing I2C.

[mircsicz]

Only thing missing was:

#define USE_IR_REMOTE
#define USE_IR_RECEIVE

[benzino77]

How about just selecting "IR Support"?

[mircsicz]

Didn't wanna bloat the image, so I just picked what I needed:

#ifdef MQTT_HOST
  #undef MQTT_HOST
#endif
#define MQTT_HOST               "10.10.1x1.x1"

#ifdef MQTT_PORT
  #undef MQTT_PORT
#endif
#define MQTT_PORT               1883

#ifdef MQTT_USER
  #undef MQTT_USER
#endif
#define MQTT_USER            "tasmo"

#ifdef MQTT_PASS
  #undef MQTT_PASS
#endif
#define MQTT_PASS            "xxx"

#ifdef NTP_SERVER1
  #undef NTP_SERVER1
#endif
#define NTP_SERVER1             "10.10.1x1.1"

#define USE_I2C
#define USE_BMP
#define USE_AHT1x
#define USE_AHT2x
// https://tasmota.github.io/docs/I2CDEVICES/#supported-i2c-devices

#define USE_IR_REMOTE
#define USE_IR_RECEIVE
// https://github.com/arendst/Tasmota/discussions/13202

#define DECODE_LG  true
#define DECODE_LG2  true
#define DECODE_MIRAGE  true //note that if you want this protocol to be true, then MITSUBISHI_AC also needs to be true
#define DECODE_MITSUBISHI_AC  true

#define SEND_LG  true
#define SEND_LG2  true
#define SEND_MIRAGE  true  //note that if you want this protocol to be true, then MITSUBISHI_AC also needs to be true
#define SEND_MITSUBISHI_AC  true

#define SEND_GREE  false
#define DECODE_GREE  false
#define DECODE_ELECTRA_AC  false
#define SEND_ELECTRA_AC  false

#define DECODE_AIRTON  false
#define DECODE_AIRWELL  false
#define DECODE_AIWA_RC_T501  false
#define DECODE_AMCOR  false
#define DECODE_ARGO  false
#define DECODE_ARRIS  false
#define DECODE_BOSCH144  false
#define DECODE_BOSE  false
#define DECODE_CARRIER_AC  false
#define DECODE_CARRIER_AC128  false
#define DECODE_CARRIER_AC40  false
#define DECODE_CARRIER_AC64  false
#define DECODE_CLIMABUTLER  false
#define DECODE_COOLIX  false
#define DECODE_COOLIX48  false
#define DECODE_CORONA_AC  false
#define DECODE_DAIKIN  false
#define DECODE_DAIKIN128  false
#define DECODE_DAIKIN152  false
#define DECODE_DAIKIN160  false
#define DECODE_DAIKIN176  false
#define DECODE_DAIKIN2  false
#define DECODE_DAIKIN200  false
#define DECODE_DAIKIN216  false
#define DECODE_DAIKIN312  false
#define DECODE_DAIKIN64  false
#define DECODE_DELONGHI_AC  false
#define DECODE_DENON  false
#define DECODE_DISH  false
#define DECODE_DOSHISHA  false
#define DECODE_ECOCLIM  false
#define DECODE_ELITESCREENS  false
#define DECODE_EPSON  false
#define DECODE_FUJITSU_AC  false
#define DECODE_GICABLE  false
#define DECODE_GLOBALCACHE  false
#define DECODE_GOODWEATHER  false
#define DECODE_HAIER_AC  false
#define DECODE_HAIER_AC160  false
#define DECODE_HAIER_AC176  false
#define DECODE_HAIER_AC_YRW02  false //note that if you want this protocol to be true, then HAIER_AC176 also needs to be true
#define DECODE_HITACHI_AC  false
#define DECODE_HITACHI_AC1  false
#define DECODE_HITACHI_AC2  false
#define DECODE_HITACHI_AC264  false
#define DECODE_HITACHI_AC296  false
#define DECODE_HITACHI_AC3  false
#define DECODE_HITACHI_AC344  false
#define DECODE_HITACHI_AC424  false
#define DECODE_INAX  false
#define DECODE_JVC  false
#define DECODE_KELON  false
#define DECODE_KELON168  false
#define DECODE_KELVINATOR  false
#define DECODE_LASERTAG  false
#define DECODE_LEGOPF  false

#define DECODE_LUTRON  false
#define DECODE_MAGIQUEST  false
#define DECODE_METZ  false
#define DECODE_MIDEA  false
#define DECODE_MIDEA24  false
#define DECODE_MILESTAG2  false
#define DECODE_MITSUBISHI  false
#define DECODE_MITSUBISHI112  false
#define DECODE_MITSUBISHI136  false
#define DECODE_MITSUBISHI2  false
#define DECODE_MITSUBISHIHEAVY  false

#define DECODE_MULTIBRACKETS  false
#define DECODE_MWM  false
#define DECODE_NEC  false
#define DECODE_NEOCLIMA  false
#define DECODE_NIKAI  false
#define DECODE_PANASONIC  false
#define DECODE_PANASONIC_AC  false
#define DECODE_PANASONIC_AC32  false
#define DECODE_PIONEER  false
#define DECODE_PRONTO  false
#define DECODE_RC5  false
#define DECODE_RC6  false
#define DECODE_RCMM  false
#define DECODE_RHOSS  false
#define DECODE_SAMSUNG  false
#define DECODE_SAMSUNG36  false
#define DECODE_SAMSUNG_AC  false
#define DECODE_SANYO  false
#define DECODE_SANYO_AC  false
#define DECODE_SANYO_AC152  false
#define DECODE_SANYO_AC88  false
#define DECODE_SHARP  false
#define DECODE_SHARP_AC  false
#define DECODE_SHERWOOD  false
#define DECODE_SONY  false
#define DECODE_SYMPHONY  false
#define DECODE_TCL112AC  false
#define DECODE_TCL96AC  false
#define DECODE_TECHNIBEL_AC  false
#define DECODE_TECO  false
#define DECODE_TEKNOPOINT  false
#define DECODE_TOSHIBA_AC  false
#define DECODE_TOTO  false
#define DECODE_TRANSCOLD  false
#define DECODE_TROTEC  false
#define DECODE_TROTEC_3550  false
#define DECODE_TRUMA  false
#define DECODE_VESTEL_AC  false
#define DECODE_VOLTAS  false
#define DECODE_WHIRLPOOL_AC  false
#define DECODE_WHYNTER  false
#define DECODE_XMP  false
#define DECODE_ZEPEAL  false
#define SEND_AIRTON  false
#define SEND_AIRWELL  false
#define SEND_AIWA_RC_T501  false
#define SEND_AMCOR  false
#define SEND_ARGO  false
#define SEND_ARRIS  false
#define SEND_BOSCH144  false
#define SEND_BOSE  false
#define SEND_CARRIER_AC  false
#define SEND_CARRIER_AC128  false
#define SEND_CARRIER_AC40  false
#define SEND_CARRIER_AC64  false
#define SEND_CLIMABUTLER  false
#define SEND_COOLIX  false
#define SEND_COOLIX48  false
#define SEND_CORONA_AC  false
#define SEND_DAIKIN  false
#define SEND_DAIKIN128  false
#define SEND_DAIKIN152  false
#define SEND_DAIKIN160  false
#define SEND_DAIKIN176  false
#define SEND_DAIKIN2  false
#define SEND_DAIKIN200  false
#define SEND_DAIKIN216  false
#define SEND_DAIKIN312  false
#define SEND_DAIKIN64  false
#define SEND_DELONGHI_AC  false
#define SEND_DENON  false
#define SEND_DISH  false
#define SEND_DOSHISHA  false
#define SEND_ECOCLIM  false
#define SEND_ELITESCREENS  false
#define SEND_EPSON  false
#define SEND_FUJITSU_AC  false
#define SEND_GICABLE  false
#define SEND_GOODWEATHER  false
#define SEND_HAIER_AC  false
#define SEND_HAIER_AC160  false
#define SEND_HAIER_AC176  false
#define SEND_HAIER_AC_YRW02  false //note that if you want this protocol to be true, then HAIER_AC176 also needs to be true
#define SEND_HASH  false
#define SEND_HITACHI_AC  false
#define SEND_HITACHI_AC1  false
#define SEND_HITACHI_AC2  false
#define SEND_HITACHI_AC264  false
#define SEND_HITACHI_AC296  false
#define SEND_HITACHI_AC3  false
#define SEND_HITACHI_AC344  false
#define SEND_HITACHI_AC424  false
#define SEND_INAX  false
#define SEND_JVC  false
#define SEND_KELON  false
#define SEND_KELON168  false
#define SEND_KELVINATOR  false
#define SEND_LASERTAG  false
#define SEND_LEGOPF  false

#define SEND_LUTRON  false
#define SEND_MAGIQUEST  false
#define SEND_METZ  false
#define SEND_MIDEA  false
#define SEND_MIDEA24  false
#define SEND_MILESTAG2  false

#define SEND_MITSUBISHI  false
#define SEND_MITSUBISHI112  false
#define SEND_MITSUBISHI136  false
#define SEND_MITSUBISHI2  false
#define SEND_MITSUBISHIHEAVY  false

#define SEND_MULTIBRACKETS  false
#define SEND_MWM  false
#define SEND_NEC  false
#define SEND_NEOCLIMA  false
#define SEND_NIKAI  false
#define SEND_PANASONIC  false
#define SEND_PANASONIC_AC  false
#define SEND_PANASONIC_AC32  false
#define SEND_PIONEER  false
#define SEND_PRONTO  false
#define SEND_RC5  false
#define SEND_RC6  false
#define SEND_RCMM  false
#define SEND_RHOSS  false
#define SEND_SAMSUNG  false
#define SEND_SAMSUNG36  false
#define SEND_SAMSUNG_AC  false
#define SEND_SANYO  false
#define SEND_SANYO_AC  false
#define SEND_SANYO_AC152  false
#define SEND_SANYO_AC88  false
#define SEND_SHARP  false
#define SEND_SHARP_AC  false
#define SEND_SHERWOOD  false
#define SEND_SONY  false
#define SEND_SYMPHONY  false
#define SEND_TCL112AC  false
#define SEND_TCL96AC  false
#define SEND_TECHNIBEL_AC  false
#define SEND_TECO  false
#define SEND_TEKNOPOINT  false
#define SEND_TOSHIBA_AC  false
#define SEND_TOTO  false
#define SEND_TRANSCOLD  false
#define SEND_TROTEC  false
#define SEND_TROTEC_3550  false
#define SEND_TRUMA  false
#define SEND_VESTEL_AC  false
#define SEND_VOLTAS  false
#define SEND_WHIRLPOOL_AC  false
#define SEND_WHYNTER  false
#define SEND_XMP  false
#define SEND_ZEPEAL  false

[benzino77]

IR Support feature includes: USE_IR_REMOTE_FULL
Based on the description here: https://github.com/arendst/Tasmota/blob/ef7cd80ed84ba0236bf2b9a59d3d0683336c477b/tasmota/my_user_config.h#L960 all IR features (and protocols) will be included in the resulting binary.

You still need to embed your MQTT configuration via Custom parameters - as described in the README.md file.

For your Temperature/Humidity sensors... just choose Temp/Hum feature and BMP and AHT1 will be included.

ATH2 is not on the list so you have to add it via Custom parameters - can't remember but maybe AHT1 and AHT2 are exclusive. If not I will add it to the list in the future.

If you choose "Temp/Hum" feature, I2C and SPI will be included by default: FEATURE_DESC.md