install_bootstream

#!/bin/bash
#########################################
# out_byte args...  
# 
# this function writes the binary value to stdout of each argument in the order given
# i.e. out_byte 0 1 2 3  will echo "\x00\x01\x02\x03" to stdout (w/o  terminating null )
PATH=$PATH:/sbin/

function out_byte(){
  for val in $* 
  	do
	# echo -e "byte=$val"
	echo -en "\\x$(printf %02x $val)"
  done
}


function out_u32_le()
{
  for val32 in $*
  	do

	val=$(($val32))
	b0=$((val % (2**8)))
	val=$((val / (2**8)))
	b1=$((val % (2**8)))
	val=$((val / (2**8)))
	b2=$((val % (2**8)))
	val=$((val / (2**8)))
	b3=$((val % (2**8)))

	### Keep around for debug/verbose output
 	# printf "$val32 ==> %02x%02x%02x%02x\n" $b0 $b1 $b2 $b3
	
	### Output the bytes in binary form
	#
  	out_byte  $b0 $b1 $b2 $b3

  done
}


function out_bcb ()
{
  signature=0x00112233
  primary_tag=$1
  secondary_tag=$2
  num_bsb=$3
  out_u32_le signature primary_tag secondary_tag num_bsb 
}

# usage:  out_bsb tag base_sector
# where base_sector is relative to partition 
# i.e. if partition starts on lba 63 & first boot stream, base_sector = 1, not 64
# This function will automatically compute the absolute base sector.
function out_bsb 
{
  abs_sector=$(($2 + $base_sector))
  # unused0
  out_u32_le 0 
  # unused1
  out_u32_le 0
  # tag  boot stream tag
  out_u32_le $1
  # boot stream base sector (absolute)
  out_u32_le $abs_sector
  # unused2
  out_u32_le 0
}

# Usage:  mk_hdr <base_sector> <num_sb_files>
# 
# where
#
#  <base_sector> is the first sector _of the boot stream partition (i.e. /sd#2 or /sd#3, etc)
#  <num_sb_files> is the # of boot stream blocks (currently only 1 supported)

#[ $1 = ] && { echo -e " error - boot partition start sector missing"  ; exit };
#[ $2 = ] && { echo -e " error - # of bootable images in .sb file missing" ; exit };

# Future usage:  make_boot <dev_partition> <sb_file_tag,sb_sector_offset> <sb_file_tag2, base_addr2> ... 
#
# Where base sector comes from MBR, and sb_sector_offset is an offset from start of boot-partition, not absolute sector.
function mk_hdr() {
base_sector=$1
numbootstreams=$2
primary=0
secondary=0
###############################
# Send header output to std out
###############################


# Output boot stream signature & info
# out_u32_le signature primary secondary numbootstreams 

out_bcb primary secondary numbootstreams

# Output .sb starting sector info 
# out_u32_le unused0 unused1 tag base_sector unused2

out_bsb primary 1 

# Output bsb for sb #2
#out_bsb tag_[p|s] base_sector_2

# Output bsb for sb #n
# out_bsb tag_[p|s] base_sector_n
# 
}

if [ $# -ne 3 ] ; then
  echo "Usage: $0 <bootstream> <device> <partition>"
  echo "Where <bootstream is name of .sb file to use, <device> is name of device, i.e. sda, sdb, mmcblk0, etc."
  echo "<partition> is the partition to load the bootstream on to"
  exit 1
fi
if [ ! -e /dev/$2$3 ] ; then
  echo "Error: Requested partition does not exist"
  exit 1
fi
if [ `sudo fdisk -lu /dev/$2 | awk 'BEGIN{nores=1;} $5==53 { print $1; nores=0; } END{if (nores) print "Err";}'` != "/dev/$2$3" ]  ; then
  echo "Error: requested partition /dev/$2$3 does not have ID 53"
  echo "Please make sure requested partition has the correct datatype"
  exit 1
fi
echo -e "\nInstalling boot stream $1 on /dev/$2$3..."                          
mk_hdr `sudo fdisk -lu /dev/$2 | awk '$5==53 {print $2}'` 1  > temp.bin
sudo dd if=temp.bin of=/dev/$2$3 ibs=512 conv=sync                      
sudo dd if=$1 of=/dev/$2$3 ibs=512 obs=512 seek=1 conv=sync             
sync                                                               
rm temp.bin                                                               
echo -e "...finished installing boot stream on $2$3.\n"