Rancher Charts

This repository contains Helm charts served by Rancher Apps & Marketplace.

Issues

All issues must be created in rancher/rancher repository.

Branches

• dev-2.X branches contain charts that under active development, to be released in an upcoming Rancher release.
• release-v2.X branches contain charts that have already been developed, tested, and released on an existing Rancher release.

Making Changes

Since this repository uses rancher/charts-build-scripts, making changes to this repository involves three steps:

1. Adding or modifying an existing Package tracked in the packages/ directory. Usually involves make prepare, make patch, and make clean.
2. Running make charts to automatically generate assets used to serve a Helm repository (charts/, assets/, and index.yaml) based on the contents of packages/.
3. [CI] Running make validate to ensure that all generated assets are up-to-date and ready to be merged.

Adding Net-New dependencies to dev-2.7

A new build artifact was introduced in v2.7.0 of Rancher, titled rancher-image-origins.txt, which denotes the source code repository (github repository) of each image used in Charts and System-Charts. When adding new dependencies to dev-2.7, a PR must first be raised and merged in the Rancher repository with the required changes to the pkg/image/origins.go file. This ensures that the artifact is up-to-date with the latest images, and will prevent build failures within Rancher when attempting to generate the artifact. Changes to this file are not required when updating versions of existing dependencies.

Versioning Charts

There are two kinds of charts that exist in this repository. One is upstream charts and another is local charts. For each type the versioning is different.

Upstream Charts

In this repository, all packages specify the version field in the package.yaml. The upstream charts follow this versioning X.Y.P[+upX.Y.Z] X.Y.Z is the upstream chart's major.minor.patch.

The X.Y.P versioning scheme roughly corresponds to the following rules (with exceptions):

• Major Version: represents the Rancher minor version these charts are being released to.
  • Anything less than 100: Rancher 2.5
  • 100: Rancher 2.6
  • 101: Rancher 2.7
  • 102: Rancher 2.7
  • 103: Rancher 2.8
  • etc.
• Minor Version: represents a release line of a given chart within a Rancher minor version.
• Patch Version: represents a patch to a given release line of a chart within a Rancher minor version.

As a rule of thumb, you will only ever touch this version to increment the patch version once per Rancher patch release. Once it has been incremented, it should not be incremented again until the next Rancher patch release, even if the chart points to an upstream that has been modified.

For more information on how package versioning works, please see docs/developing.md.

Local Charts

• For local charts, we don't follow any complex versioning scheme. Only one semver, versioning scheme x.x.x is being followed.

Rancher Version Annotations

In addition to modifying the chart version, the catalog.cattle.io/rancher-version annotation is required for user-facing charts which show up in Rancher UI; there is no need to add the annotation to CRD charts or internal charts (like fleet).

General guidelines when releasing a new version of a user-facing chart:

1. Ensure the chart has the annotation catalog.cattle.io/rancher-version with a lower and upper bound, such as >= 2.6.0-0 < 2.7.0-0. This indicates that a fresh install of the chart should be allowed in any version of Rancher over 2.6.0-0 and below 2.7.0-0 line. It should be freshly installable in 2.6.0+, but should not be freshly installable in Rancher 2.7.0+. The lower bound is particularly useful for charts that will not work in an older version of Rancher, e.g. catalog.cattle.io/rancher-version: >= 2.6.2-0 < 2.7.0-0 indicates that this chart should only be freshly installable in Rancher 2.6.2+, but should not be freshly installable in Rancher 2.7.0+.

• If you do this, it is also recommended that you modify the previously released chart to have catalog.cattle.io/rancher-version: < 2.6.2-0. For instructions on how to modify existing charts, see docs/developing.md.

2. Ensure the chart has the annotation catalog.cattle.io/kube-version with a lower and upper bound, such as >= 1.16.0-0 < 1.25.0-0. This indicates that a fresh install of the chart should be allowed in a cluster with any version of Kubernetes over 1.16.0 and below 1.25.0 line. It should be freshly installable in a 1.16.0+ cluster, but should not be freshly installable in 1.25.0+.

Versioning FAQ

• Do we directly backport charts to previous Rancher minor versions (e.g. make 100.x.x available in Rancher 2.5)?

No, we do not. If a fix needs to go to both Rancher 2.5 and v2.6, we just release a new chart in each branch. Then, we forward-port the one released in the release-v2.5 branch to release-v2.6.

If a fix that went into Rancher 2.6 needs to be backported to Rancher 2.5, it will be the developer's responsibility to bump the chart version in dev-v2.5, copy back the changes, and release a new chart following the Rancher 2.5 versioning scheme to release-v2.5.

• If Rancher 2.5 releases Monitoring 14.5.100 and 16.6.0 and Rancher 2.6 releases Monitoring 100.0.0+up14.5.100 and 100.0.1+up16.6.0, how do we prevent users from "downgrading" from 16.6.0 to 100.0.0+up14.5.100 on a helm upgrade after upgrading Rancher minor versions?

Currently, this is unavoidable. There is an expectation that users should look at the upstream annotation on the chart version (e.g. +upX.Y.Z), read the Rancher minor version release notes, or consult the chart's README.md or app-README.md before performing an upgrade on their applications after migrating to a new Rancher minor version.

We are still looking for a better way to mitigate this kind of risk.

• For Rancher version annotations, why don't we need to add the lower bound all the time?

Each Rancher minor version has its dedicated chart release branch (e.g. release-v2.5, release-v2.6, etc.), so a chart designed for Rancher 2.6.x will never be available or show up in Rancher 2.5.x; therefore, we do not need to worry about setting a lower bound of > 2.5.99-0 on all charts.

Supporting Images in Airgap

Currently, the scripts used to generate the rancher-images.txt (used for mirroring a private registry in a air-gapped Rancher setup) rely on values.yaml files in charts that nest all image repository and tags used by the Helm chart under repository and tag fields.

For example:

image: org/repo:v0.0.0 # will not be picked up

hello:
  world:
    # will be picked up, even though it is nested under hello.world.*
    repository: org/repo
    tag: v0.0.0
    os: windows # optional, takes in a comma-delimited list of supported OSs. By default, the OS is assumed to be "linux" but you can specify "windows" or "linux,windows" as well.

Therefore, any charts that are committed into this repository must nest references to Docker images in this format within each chart's values.yaml; if an upstream chart you are referencing does not follow this format, it is recommended that you refactor the chart's values.yaml to look like this:

images:
  config_reloader:
    repository: rancher/mirrored-jimmidyson-configmap-reload
    tag: v0.4.0
  fluentbit:
    repository: rancher/mirrored-fluent-fluent-bit
    tag: 1.7.9
  fluentbit_debug:
    repository: rancher/mirrored-fluent-fluent-bit
    tag: 1.7.9-debug
  fluentd:
    repository: rancher/mirrored-banzaicloud-fluentd
    tag: v1.12.4-alpine-1
  nodeagent_fluentbit:
    os: "windows"
    repository: rancher/fluent-bit
    tag: 1.7.4

Links

For more information on how to make changes to this repository, please see docs/developing.md.

For more information on experimental features, please see docs/experimental.md.

For more information on commands that can be run in this repository, please see docs/makefile.md.

For more information on Packages, please see docs/packages.md.

For more information on CI, please see docs/validation.md.