USB Event Packet protocol (LoRA) Stick
Original project dating back @ 2018 CircuitMaker USB-EVP-LoRa
USB stick for Event Packet (over LoRa) with integrated antenna on ISM 868/915 bands.
Exposes a generic USB HID interface by MCP2210 directly enabling OS & driver agnostic access from userland.
It have a minimal BOM (bill of materials).
- Smallest LoRa stick on the market by 1.6 x 4 cm
- Uses FCC and CE certified 100mW NiceRF module
- Own ceramic micro-antenna (VNA proved RF) for ISM band
- OS agnostic, opensource USB stack for windows, linux, android etc
- C / C++ frontend with various examples
- May support LPWAN networking (IPv6 over 802.15.4 mac layer), with third party kernel module
Can be used in any USB port realying packets over the air.
- See the design files available for Altium ®, CircuitMaker ®, KiCAD and Gerber format.
- Check schematic available as quick readable format.
- There is also an CircuitMaker ® online version available.
-
See software section for configuration and support.
$ ./bin/lora-receive /dev/hidraw4 LoRa RX count #1 frame length = 14 rssi = -61 dB snr = 8 dB 0x00000000 20 6C 6F 72 61 20 6D 65 73 73 61 67 65 00 | A lora message.
