From 69682d6d972872d244895115f46a2ff0498bf9cd Mon Sep 17 00:00:00 2001 From: robert Date: Thu, 25 Apr 2024 09:23:43 -0400 Subject: [PATCH 1/2] Added N94 baremetal skeleton --- .../Makefile | 43 ++ .../frdm-mcxn947-make-baremetal-builtin/hal.c | 146 +++++++ .../frdm-mcxn947-make-baremetal-builtin/hal.h | 90 +++++ .../link.ld | 29 ++ .../main.c | 5 + .../startup.c | 372 ++++++++++++++++++ 6 files changed, 685 insertions(+) create mode 100644 examples/nxp/frdm-mcxn947-make-baremetal-builtin/Makefile create mode 100644 examples/nxp/frdm-mcxn947-make-baremetal-builtin/hal.c create mode 100644 examples/nxp/frdm-mcxn947-make-baremetal-builtin/hal.h create mode 100644 examples/nxp/frdm-mcxn947-make-baremetal-builtin/link.ld create mode 100644 examples/nxp/frdm-mcxn947-make-baremetal-builtin/main.c create mode 100644 examples/nxp/frdm-mcxn947-make-baremetal-builtin/startup.c diff --git a/examples/nxp/frdm-mcxn947-make-baremetal-builtin/Makefile b/examples/nxp/frdm-mcxn947-make-baremetal-builtin/Makefile new file mode 100644 index 0000000000..112384634f --- /dev/null +++ b/examples/nxp/frdm-mcxn947-make-baremetal-builtin/Makefile @@ -0,0 +1,43 @@ +CFLAGS = -W -Wall -Wextra -Werror -Wundef -Wshadow -Wdouble-promotion +CFLAGS += -Wformat-truncation -fno-common # -Wconversion is not SDK-friendly +CFLAGS += -g3 -Os -ffunction-sections -fdata-sections +CFLAGS += -I. -Icmsis_core/CMSIS/Core/Include -Icmsis_n94/devices/MCXN947/ +CFLAGS += -Icmsis_n94/devices/MCXN947/drivers +CFLAGS += -DCPU_MCXN947VDF -DCPU_MCXN947VDF_cm33 -DCPU_MCXN947VDF_cm33_core0 +CFLAGS += -mcpu=cortex-m33 -mthumb -mfloat-abi=hard -mfpu=fpv5-d16 $(CFLAGS_EXTRA) +LDSCRIPT = link.ld +LDFLAGS ?= -T$(LDSCRIPT) -nostdlib -nostartfiles --specs nano.specs -lc -lgcc -Wl,--gc-sections -Wl,-Map=$@.map + +SOURCES = main.c hal.c +SOURCES += startup.c +CFLAGS += -D__ATOLLIC__ -D__STARTUP_CLEAR_BSS # Make startup code work as expected + +# Mongoose options are defined in mongoose_custom.h +#SOURCES += mongoose.c packed_fs.c + +# Example specific build options. See README.md +CFLAGS += -DHTTP_URL=\"http://0.0.0.0/\" -DHTTPS_URL=\"https://0.0.0.0/\" + +ifeq ($(OS),Windows_NT) + RM = cmd /C del /Q /F /S +else + RM = rm -rf +endif + +all build example: firmware.bin + +firmware.bin: firmware.elf + arm-none-eabi-objcopy -O binary $< $@ + +firmware.elf: cmsis_core cmsis_n94 $(SOURCES) hal.h link.ld Makefile + arm-none-eabi-gcc $(SOURCES) $(CFLAGS) $(LDFLAGS) -o $@ + arm-none-eabi-size $@ + +cmsis_core: # ARM CMSIS core headers + git clone -q --depth 1 -b 5.9.0 https://github.com/ARM-software/CMSIS_5 $@ +cmsis_n94: + wget -O $@.zip https://mcuxpresso.nxp.com/cmsis_pack/repo/NXP.MCXN947_DFP.17.0.0.pack + mkdir $@ && cd $@ && unzip -q ../$@.zip +clean: + $(RM) firmware.* *.su cmsis_core cmsis_n94 *.zip + diff --git a/examples/nxp/frdm-mcxn947-make-baremetal-builtin/hal.c b/examples/nxp/frdm-mcxn947-make-baremetal-builtin/hal.c new file mode 100644 index 0000000000..d0240e6ad5 --- /dev/null +++ b/examples/nxp/frdm-mcxn947-make-baremetal-builtin/hal.c @@ -0,0 +1,146 @@ +// Copyright (c) 2024 Cesanta Software Limited +// All rights reserved + +#include "hal.h" + +static volatile uint64_t s_ticks; // Milliseconds since boot +void SysTick_Handler(void) { // SyStick IRQ handler, triggered every 1ms + s_ticks++; +} + +void mg_random(void *buf, size_t len) { // Use on-board RNG + for (size_t n = 0; n < len; n += sizeof(uint32_t)) { + uint32_t r = rng_read(); + memcpy((char *) buf + n, &r, n + sizeof(r) > len ? len - n : sizeof(r)); + } +} + +uint64_t mg_millis(void) { // Let Mongoose use our uptime function + return s_ticks; // Return number of milliseconds since boot +} + +void hal_init(void) { + clock_init(); // Set system clock to SYS_FREQUENCY + SystemCoreClock = SYS_FREQUENCY; // Update SystemCoreClock global var + SysTick_Config(SystemCoreClock / 1000); // Sys tick every 1ms + rng_init(); // Initialise random number generator + + uart_init(UART_DEBUG, 115200); // Initialise UART + gpio_output(LED1); // Initialise LED1 + gpio_output(LED2); // Initialise LED2 + gpio_output(LED3); // Initialise LED3 + ethernet_init(); // Initialise Ethernet pins +} + +#if defined(__ARMCC_VERSION) +// Keil specific - implement IO printf redirection +int fputc(int c, FILE *stream) { + if (stream == stdout || stream == stderr) uart_write_byte(UART_DEBUG, c); + return c; +} +#elif defined(__GNUC__) +// ARM GCC specific. ARM GCC is shipped with Newlib C library. +// Implement newlib syscalls: +// _sbrk() for malloc +// _write() for printf redirection +// the rest are just stubs +#include // For _fstat() + +uint32_t SystemCoreClock; +void SystemInit(void) { // Called automatically by startup code +} + +int _fstat(int fd, struct stat *st) { + (void) fd, (void) st; + return -1; +} + +extern unsigned char _end[]; // End of data section, start of heap. See link.ld +static unsigned char *s_current_heap_end = _end; + +size_t hal_ram_used(void) { + return (size_t) (s_current_heap_end - _end); +} + +size_t hal_ram_free(void) { + unsigned char endofstack; + return (size_t) (&endofstack - s_current_heap_end); +} + +void *_sbrk(int incr) { + unsigned char *prev_heap; + unsigned char *heap_end = (unsigned char *) ((size_t) &heap_end - 256); + prev_heap = s_current_heap_end; + // Check how much space we got from the heap end to the stack end + if (s_current_heap_end + incr > heap_end) return (void *) -1; + s_current_heap_end += incr; + return prev_heap; +} + +int _open(const char *path) { + (void) path; + return -1; +} + +int _close(int fd) { + (void) fd; + return -1; +} + +int _isatty(int fd) { + (void) fd; + return 1; +} + +int _lseek(int fd, int ptr, int dir) { + (void) fd, (void) ptr, (void) dir; + return 0; +} + +void _exit(int status) { + (void) status; + for (;;) asm volatile("BKPT #0"); +} + +void _kill(int pid, int sig) { + (void) pid, (void) sig; +} + +int _getpid(void) { + return -1; +} + +int _write(int fd, char *ptr, int len) { + (void) fd, (void) ptr, (void) len; + if (fd == 1) uart_write_buf(UART_DEBUG, ptr, (size_t) len); + return -1; +} + +int _read(int fd, char *ptr, int len) { + (void) fd, (void) ptr, (void) len; + return -1; +} + +int _link(const char *a, const char *b) { + (void) a, (void) b; + return -1; +} + +int _unlink(const char *a) { + (void) a; + return -1; +} + +int _stat(const char *path, struct stat *st) { + (void) path, (void) st; + return -1; +} + +int mkdir(const char *path, mode_t mode) { + (void) path, (void) mode; + return -1; +} + +void _init(void) { +} +#endif // __GNUC__ diff --git a/examples/nxp/frdm-mcxn947-make-baremetal-builtin/hal.h b/examples/nxp/frdm-mcxn947-make-baremetal-builtin/hal.h new file mode 100644 index 0000000000..4dce3eecb0 --- /dev/null +++ b/examples/nxp/frdm-mcxn947-make-baremetal-builtin/hal.h @@ -0,0 +1,90 @@ +// Copyright (c) 2023 Cesanta Software Limited +// All rights reserved + +#pragma once + +#include +#include +#include +#include + +#define LED1 PIN(0, 0) +#define LED2 LED1 +#define LED3 LED1 + +#ifndef UART_DEBUG +#define UART_DEBUG 0 +#endif + +#include "MCXN947_cm33_core0.h" + +#define BIT(x) (1UL << (x)) +#define CLRSET(reg, clear, set) ((reg) = ((reg) & ~(clear)) | (set)) +#define PIN(bank, num) ((bank << 8) | (num)) +#define PINNO(pin) (pin & 255) +#define PINBANK(pin) (pin >> 8) + +void hal_init(void); +size_t hal_ram_free(void); +size_t hal_ram_used(void); + +static inline void spin(volatile uint32_t count) { + while (count--) (void) 0; +} + +#define SYS_FREQUENCY 48000000UL + +//static GPIO_TypeDef *gpio_bank(uint16_t pin) { return GPIO(PINBANK(pin)); } + +static inline void gpio_init(uint16_t pin, uint8_t mode, uint8_t type, + uint8_t speed, uint8_t pull, uint8_t af) { + (void) pin, (void) mode, (void) type, (void) speed, (void) pull, (void) af; +} + +static inline void gpio_input(uint16_t pin) { + (void) pin; +} + +static inline void gpio_output(uint16_t pin) { + (void) pin; +} + +static inline bool gpio_read(uint16_t pin) { + (void) pin; + return false; +} + +static inline void gpio_write(uint16_t pin, bool value) { + (void) pin, (void) value; +} + +static inline void gpio_toggle(uint16_t pin) { + gpio_write(pin, !gpio_read(pin)); +} + +static inline void uart_init(void *uart, unsigned long baud) { + (void) uart, (void) baud; +} + +static inline void uart_write_byte(void *uart, uint8_t byte) { + (void) uart, (void) byte; +} + +static inline void uart_write_buf(void *uart, char *buf, size_t len) { + while (len-- > 0) uart_write_byte(uart, *(uint8_t *) buf++); +} + +static inline void rng_init(void) { +} +static inline uint32_t rng_read(void) { + return 0; +} + +static inline void ethernet_init(void) { +} + +static inline void clock_init(void) { + SCB->CPACR |= ((3UL << 10 * 2) | (3UL << 11 * 2)); // Enable FPU + asm("DSB"); + asm("ISB"); +} diff --git a/examples/nxp/frdm-mcxn947-make-baremetal-builtin/link.ld b/examples/nxp/frdm-mcxn947-make-baremetal-builtin/link.ld new file mode 100644 index 0000000000..4de06c9d38 --- /dev/null +++ b/examples/nxp/frdm-mcxn947-make-baremetal-builtin/link.ld @@ -0,0 +1,29 @@ +OUTPUT_FORMAT("elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(Reset_Handler) + +MEMORY +{ + flash(RX) : ORIGIN = 0x0, LENGTH = 0x100000 + sram(!RX) : ORIGIN = 0x20000000, LENGTH = 0x60000 +} + +_estack = ORIGIN(sram) + LENGTH(sram); + +SECTIONS +{ + .vectors : { FILL(256) KEEP(*(.isr_vector)) } > flash + .text : { *(.text*) } > flash + .data : { + _sdata = .; + *(.first_data) + *(.data SORT(.data.*)) + _edata = .; + } > sram AT > flash + _sidata = LOADADDR(.data); + + .bss : { _sbss = .; *(.bss SORT(.bss.*) COMMON) _ebss = .; } > sram + + . = ALIGN(8); + _end = .; + } diff --git a/examples/nxp/frdm-mcxn947-make-baremetal-builtin/main.c b/examples/nxp/frdm-mcxn947-make-baremetal-builtin/main.c new file mode 100644 index 0000000000..0d76150f2b --- /dev/null +++ b/examples/nxp/frdm-mcxn947-make-baremetal-builtin/main.c @@ -0,0 +1,5 @@ +#include "hal.h" + +int main() { + for (;;); +} \ No newline at end of file diff --git a/examples/nxp/frdm-mcxn947-make-baremetal-builtin/startup.c b/examples/nxp/frdm-mcxn947-make-baremetal-builtin/startup.c new file mode 100644 index 0000000000..51245b660d --- /dev/null +++ b/examples/nxp/frdm-mcxn947-make-baremetal-builtin/startup.c @@ -0,0 +1,372 @@ +#include "MCXN947_cm33_core0.h" + +void Reset_Handler(void); // Defined below +void Dummy_Handler(void); // Defined below +void SysTick_Handler(void); // Defined in main.c +void SystemInit(void); // Defined in main.c, called by reset handler +void _estack(void); // Defined in link.ld + +#define WEAK_ALIAS __attribute__((weak, alias("Default_Handler"))) + +WEAK_ALIAS void NMI_Handler(void); +WEAK_ALIAS void HardFault_Handler(void); +WEAK_ALIAS void MemManage_Handler(void); +WEAK_ALIAS void BusFault_Handler(void); +WEAK_ALIAS void UsageFault_Handler(void); +WEAK_ALIAS void SecureFault_Handler(void); +WEAK_ALIAS void DebugMon_Handler(void); +WEAK_ALIAS void SVC_Handler(void); +WEAK_ALIAS void PendSV_Handler(void); +WEAK_ALIAS void SysTick_Handler(void); + +WEAK_ALIAS void OR_IRQHandler(void); +WEAK_ALIAS void EDMA_0_CH0_IRQHandler(void); +WEAK_ALIAS void EDMA_0_CH1_IRQHandler(void); +WEAK_ALIAS void EDMA_0_CH2_IRQHandler(void); +WEAK_ALIAS void EDMA_0_CH3_IRQHandler(void); +WEAK_ALIAS void EDMA_0_CH4_IRQHandler(void); +WEAK_ALIAS void EDMA_0_CH5_IRQHandler(void); +WEAK_ALIAS void EDMA_0_CH6_IRQHandler(void); +WEAK_ALIAS void EDMA_0_CH7_IRQHandler(void); +WEAK_ALIAS void EDMA_0_CH8_IRQHandler(void); +WEAK_ALIAS void EDMA_0_CH9_IRQHandler(void); +WEAK_ALIAS void EDMA_0_CH10_IRQHandler(void); +WEAK_ALIAS void EDMA_0_CH11_IRQHandler(void); +WEAK_ALIAS void EDMA_0_CH12_IRQHandler(void); +WEAK_ALIAS void EDMA_0_CH13_IRQHandler(void); +WEAK_ALIAS void EDMA_0_CH14_IRQHandler(void); +WEAK_ALIAS void EDMA_0_CH15_IRQHandler(void); +WEAK_ALIAS void GPIO00_IRQHandler(void); +WEAK_ALIAS void GPIO01_IRQHandler(void); +WEAK_ALIAS void GPIO10_IRQHandler(void); +WEAK_ALIAS void GPIO11_IRQHandler(void); +WEAK_ALIAS void GPIO20_IRQHandler(void); +WEAK_ALIAS void GPIO21_IRQHandler(void); +WEAK_ALIAS void GPIO30_IRQHandler(void); +WEAK_ALIAS void GPIO31_IRQHandler(void); +WEAK_ALIAS void GPIO40_IRQHandler(void); +WEAK_ALIAS void GPIO41_IRQHandler(void); +WEAK_ALIAS void GPIO50_IRQHandler(void); +WEAK_ALIAS void GPIO51_IRQHandler(void); +WEAK_ALIAS void UTICK0_IRQHandler(void); +WEAK_ALIAS void MRT0_IRQHandler(void); +WEAK_ALIAS void CTIMER0_IRQHandler(void); +WEAK_ALIAS void CTIMER1_IRQHandler(void); +WEAK_ALIAS void SCT0_IRQHandler(void); +WEAK_ALIAS void CTIMER2_IRQHandler(void); +WEAK_ALIAS void LP_FLEXCOMM0_IRQHandler(void); +WEAK_ALIAS void LP_FLEXCOMM1_IRQHandler(void); +WEAK_ALIAS void LP_FLEXCOMM2_IRQHandler(void); +WEAK_ALIAS void LP_FLEXCOMM3_IRQHandler(void); +WEAK_ALIAS void LP_FLEXCOMM4_IRQHandler(void); +WEAK_ALIAS void LP_FLEXCOMM5_IRQHandler(void); +WEAK_ALIAS void LP_FLEXCOMM6_IRQHandler(void); +WEAK_ALIAS void LP_FLEXCOMM7_IRQHandler(void); +WEAK_ALIAS void LP_FLEXCOMM8_IRQHandler(void); +WEAK_ALIAS void LP_FLEXCOMM9_IRQHandler(void); +WEAK_ALIAS void ADC0_IRQHandler(void); +WEAK_ALIAS void ADC1_IRQHandler(void); +WEAK_ALIAS void PINT0_IRQHandler(void); +WEAK_ALIAS void PDM_EVENT_IRQHandler(void); +WEAK_ALIAS void Reserved65_IRQHandler(void); +WEAK_ALIAS void USB0_FS_IRQHandler(void); +WEAK_ALIAS void USB0_DCD_IRQHandler(void); +WEAK_ALIAS void RTC_IRQHandler(void); +WEAK_ALIAS void SMARTDMA_IRQHandler(void); +WEAK_ALIAS void MAILBOX_IRQHandler(void); +WEAK_ALIAS void CTIMER3_IRQHandler(void); +WEAK_ALIAS void CTIMER4_IRQHandler(void); +WEAK_ALIAS void OS_EVENT_IRQHandler(void); +WEAK_ALIAS void FLEXSPI0_IRQHandler(void); +WEAK_ALIAS void SAI0_IRQHandler(void); +WEAK_ALIAS void SAI1_IRQHandler(void); +WEAK_ALIAS void USDHC0_IRQHandler(void); +WEAK_ALIAS void CAN0_IRQHandler(void); +WEAK_ALIAS void CAN1_IRQHandler(void); +WEAK_ALIAS void Reserved80_IRQHandler(void); +WEAK_ALIAS void Reserved81_IRQHandler(void); +WEAK_ALIAS void USB1_HS_PHY_IRQHandler(void); +WEAK_ALIAS void USB1_HS_IRQHandler(void); +WEAK_ALIAS void SEC_HYPERVISOR_CALL_IRQHandler(void); +WEAK_ALIAS void Reserved85_IRQHandler(void); +WEAK_ALIAS void PLU_IRQHandler(void); +WEAK_ALIAS void Freqme_IRQHandler(void); +WEAK_ALIAS void SEC_VIO_IRQHandler(void); +WEAK_ALIAS void ELS_IRQHandler(void); +WEAK_ALIAS void PKC_IRQHandler(void); +WEAK_ALIAS void PUF_IRQHandler(void); +WEAK_ALIAS void PQ_IRQHandler(void); +WEAK_ALIAS void EDMA_1_CH0_IRQHandler(void); +WEAK_ALIAS void EDMA_1_CH1_IRQHandler(void); +WEAK_ALIAS void EDMA_1_CH2_IRQHandler(void); +WEAK_ALIAS void EDMA_1_CH3_IRQHandler(void); +WEAK_ALIAS void EDMA_1_CH4_IRQHandler(void); +WEAK_ALIAS void EDMA_1_CH5_IRQHandler(void); +WEAK_ALIAS void EDMA_1_CH6_IRQHandler(void); +WEAK_ALIAS void EDMA_1_CH7_IRQHandler(void); +WEAK_ALIAS void EDMA_1_CH8_IRQHandler(void); +WEAK_ALIAS void EDMA_1_CH9_IRQHandler(void); +WEAK_ALIAS void EDMA_1_CH10_IRQHandler(void); +WEAK_ALIAS void EDMA_1_CH11_IRQHandler(void); +WEAK_ALIAS void EDMA_1_CH12_IRQHandler(void); +WEAK_ALIAS void EDMA_1_CH13_IRQHandler(void); +WEAK_ALIAS void EDMA_1_CH14_IRQHandler(void); +WEAK_ALIAS void EDMA_1_CH15_IRQHandler(void); +WEAK_ALIAS void CDOG0_IRQHandler(void); +WEAK_ALIAS void CDOG1_IRQHandler(void); +WEAK_ALIAS void I3C0_IRQHandler(void); +WEAK_ALIAS void I3C1_IRQHandler(void); +WEAK_ALIAS void NPU_IRQHandler(void); +WEAK_ALIAS void GDET_IRQHandler(void); +WEAK_ALIAS void VBAT0_IRQHandler(void); +WEAK_ALIAS void EWM0_IRQHandler(void); +WEAK_ALIAS void TSI_END_OF_SCAN_IRQHandler(void); +WEAK_ALIAS void TSI_OUT_OF_SCAN_IRQHandler(void); +WEAK_ALIAS void EMVSIM0_IRQHandler(void); +WEAK_ALIAS void EMVSIM1_IRQHandler(void); +WEAK_ALIAS void FLEXIO_IRQHandler(void); +WEAK_ALIAS void DAC0_IRQHandler(void); +WEAK_ALIAS void DAC1_IRQHandler(void); +WEAK_ALIAS void DAC2_IRQHandler(void); +WEAK_ALIAS void HSCMP0_IRQHandler(void); +WEAK_ALIAS void HSCMP1_IRQHandler(void); +WEAK_ALIAS void HSCMP2_IRQHandler(void); +WEAK_ALIAS void FLEXPWM0_RELOAD_ERROR_IRQHandler(void); +WEAK_ALIAS void FLEXPWM0_FAULT_IRQHandler(void); +WEAK_ALIAS void FLEXPWM0_SUBMODULE0_IRQHandler(void); +WEAK_ALIAS void FLEXPWM0_SUBMODULE1_IRQHandler(void); +WEAK_ALIAS void FLEXPWM0_SUBMODULE2_IRQHandler(void); +WEAK_ALIAS void FLEXPWM0_SUBMODULE3_IRQHandler(void); +WEAK_ALIAS void FLEXPWM1_RELOAD_ERROR_IRQHandler(void); +WEAK_ALIAS void FLEXPWM1_FAULT_IRQHandler(void); +WEAK_ALIAS void FLEXPWM1_SUBMODULE0_IRQHandler(void); +WEAK_ALIAS void FLEXPWM1_SUBMODULE1_IRQHandler(void); +WEAK_ALIAS void FLEXPWM1_SUBMODULE2_IRQHandler(void); +WEAK_ALIAS void FLEXPWM1_SUBMODULE3_IRQHandler(void); +WEAK_ALIAS void ENC0_COMPARE_IRQHandler(void); +WEAK_ALIAS void ENC0_HOME_IRQHandler(void); +WEAK_ALIAS void ENC0_WDG_SAB_IRQHandler(void); +WEAK_ALIAS void ENC0_IDX_IRQHandler(void); +WEAK_ALIAS void ENC1_COMPARE_IRQHandler(void); +WEAK_ALIAS void ENC1_HOME_IRQHandler(void); +WEAK_ALIAS void ENC1_WDG_SAB_IRQHandler(void); +WEAK_ALIAS void ENC1_IDX_IRQHandler(void); +WEAK_ALIAS void ITRC0_IRQHandler(void); +WEAK_ALIAS void BSP32_IRQHandler(void); +WEAK_ALIAS void ELS_ERR_IRQHandler(void); +WEAK_ALIAS void PKC_ERR_IRQHandler(void); +WEAK_ALIAS void ERM_SINGLE_BIT_ERROR_IRQHandler(void); +WEAK_ALIAS void ERM_MULTI_BIT_ERROR_IRQHandler(void); +WEAK_ALIAS void FMU0_IRQHandler(void); +WEAK_ALIAS void ETHERNET_IRQHandler(void); +WEAK_ALIAS void ETHERNET_PMT_IRQHandler(void); +WEAK_ALIAS void ETHERNET_MACLP_IRQHandler(void); +WEAK_ALIAS void SINC_FILTER_IRQHandler(void); +WEAK_ALIAS void LPTMR0_IRQHandler(void); +WEAK_ALIAS void LPTMR1_IRQHandler(void); +WEAK_ALIAS void SCG_IRQHandler(void); +WEAK_ALIAS void SPC_IRQHandler(void); +WEAK_ALIAS void WUU_IRQHandler(void); +WEAK_ALIAS void PORT_EFT_IRQHandler(void); +WEAK_ALIAS void ETB0_IRQHandler(void); +WEAK_ALIAS void SM3_IRQHandler(void); +WEAK_ALIAS void TRNG0_IRQHandler(void); +WEAK_ALIAS void WWDT0_IRQHandler(void); +WEAK_ALIAS void WWDT1_IRQHandler(void); +WEAK_ALIAS void CMC0_IRQHandler(void); +WEAK_ALIAS void CTI0_IRQHandler(void); + +__attribute__((section(".vectors"))) void (*const tab[16 + 156])(void) = { + _estack, + Reset_Handler, + NMI_Handler, // NMI Handler + HardFault_Handler, // Hard Fault Handler + MemManage_Handler, // MPU Fault Handler + BusFault_Handler, // Bus Fault Handler + UsageFault_Handler, // Usage Fault Handler + SecureFault_Handler, // Secure Fault Handler + 0, // Reserved + 0, // Reserved + 0, // Reserved + SVC_Handler, // SVCall Handler + DebugMon_Handler, // Debug Monitor Handler + 0, // Reserved + PendSV_Handler, // PendSV Handler + SysTick_Handler, // SysTick Handler + // Chip Level - MCXN947_cm33_core0 + OR_IRQHandler, // 16 : OR IRQ + EDMA_0_CH0_IRQHandler, // 17 : eDMA_0_CH0 error or transfer complete + EDMA_0_CH1_IRQHandler, // 18 : eDMA_0_CH1 error or transfer complete + EDMA_0_CH2_IRQHandler, // 19 : eDMA_0_CH2 error or transfer complete + EDMA_0_CH3_IRQHandler, // 20 : eDMA_0_CH3 error or transfer complete + EDMA_0_CH4_IRQHandler, // 21 : eDMA_0_CH4 error or transfer complete + EDMA_0_CH5_IRQHandler, // 22 : eDMA_0_CH5 error or transfer complete + EDMA_0_CH6_IRQHandler, // 23 : eDMA_0_CH6 error or transfer complete + EDMA_0_CH7_IRQHandler, // 24 : eDMA_0_CH7 error or transfer complete + EDMA_0_CH8_IRQHandler, // 25 : eDMA_0_CH8 error or transfer complete + EDMA_0_CH9_IRQHandler, // 26 : eDMA_0_CH9 error or transfer complete + EDMA_0_CH10_IRQHandler, // 27 : eDMA_0_CH10 error or transfer complete + EDMA_0_CH11_IRQHandler, // 28 : eDMA_0_CH11 error or transfer complete + EDMA_0_CH12_IRQHandler, // 29 : eDMA_0_CH12 error or transfer complete + EDMA_0_CH13_IRQHandler, // 30 : eDMA_0_CH13 error or transfer complete + EDMA_0_CH14_IRQHandler, // 31 : eDMA_0_CH14 error or transfer complete + EDMA_0_CH15_IRQHandler, // 32 : eDMA_0_CH15 error or transfer complete + GPIO00_IRQHandler, // 33 : GPIO0 interrupt 0 + GPIO01_IRQHandler, // 34 : GPIO0 interrupt 1 + GPIO10_IRQHandler, // 35 : GPIO1 interrupt 0 + GPIO11_IRQHandler, // 36 : GPIO1 interrupt 1 + GPIO20_IRQHandler, // 37 : GPIO2 interrupt 0 + GPIO21_IRQHandler, // 38 : GPIO2 interrupt 1 + GPIO30_IRQHandler, // 39 : GPIO3 interrupt 0 + GPIO31_IRQHandler, // 40 : GPIO3 interrupt 1 + GPIO40_IRQHandler, // 41 : GPIO4 interrupt 0 + GPIO41_IRQHandler, // 42 : GPIO4 interrupt 1 + GPIO50_IRQHandler, // 43 : GPIO5 interrupt 0 + GPIO51_IRQHandler, // 44 : GPIO5 interrupt 1 + UTICK0_IRQHandler, // 45 : Micro-Tick Timer interrupt + MRT0_IRQHandler, // 46 : Multi-Rate Timer interrupt + CTIMER0_IRQHandler, // 47 : Standard counter/timer 0 interrupt + CTIMER1_IRQHandler, // 48 : Standard counter/timer 1 interrupt + SCT0_IRQHandler, // 49 : SCTimer/PWM interrupt + CTIMER2_IRQHandler, // 50 : Standard counter/timer 2 interrupt + LP_FLEXCOMM0_IRQHandler, // 51 : LP_FLEXCOMM0 (LPSPI interrupt or LPI2C interrupt or LPUART Receive/Transmit interrupt) + LP_FLEXCOMM1_IRQHandler, // 52 : LP_FLEXCOMM1 (LPSPI interrupt or LPI2C interrupt or LPUART Receive/Transmit interrupt) + LP_FLEXCOMM2_IRQHandler, // 53 : LP_FLEXCOMM2 (LPSPI interrupt or LPI2C interrupt or LPUART Receive/Transmit interrupt) + LP_FLEXCOMM3_IRQHandler, // 54 : LP_FLEXCOMM3 (LPSPI interrupt or LPI2C interrupt or LPUART Receive/Transmit interrupt) + LP_FLEXCOMM4_IRQHandler, // 55 : LP_FLEXCOMM4 (LPSPI interrupt or LPI2C interrupt or LPUART Receive/Transmit interrupt) + LP_FLEXCOMM5_IRQHandler, // 56 : LP_FLEXCOMM5 (LPSPI interrupt or LPI2C interrupt or LPUART Receive/Transmit interrupt) + LP_FLEXCOMM6_IRQHandler, // 57 : LP_FLEXCOMM6 (LPSPI interrupt or LPI2C interrupt or LPUART Receive/Transmit interrupt) + LP_FLEXCOMM7_IRQHandler, // 58 : LP_FLEXCOMM7 (LPSPI interrupt or LPI2C interrupt or LPUART Receive/Transmit interrupt) + LP_FLEXCOMM8_IRQHandler, // 59 : LP_FLEXCOMM8 (LPSPI interrupt or LPI2C interrupt or LPUART Receive/Transmit interrupt) + LP_FLEXCOMM9_IRQHandler, // 60 : LP_FLEXCOMM9 (LPSPI interrupt or LPI2C interrupt or LPUART Receive/Transmit interrupt) + ADC0_IRQHandler, // 61 : Analog-to-Digital Converter 0 - General Purpose interrupt + ADC1_IRQHandler, // 62 : Analog-to-Digital Converter 1 - General Purpose interrupt + PINT0_IRQHandler, // 63 : Pin Interrupt Pattern Match Interrupt + PDM_EVENT_IRQHandler, // 64 : Microphone Interface interrupt + Reserved65_IRQHandler, // 65 : Reserved interrupt + USB0_FS_IRQHandler, // 66 : Universal Serial Bus - Full Speed interrupt + USB0_DCD_IRQHandler, // 67 : Universal Serial Bus - Device Charge Detect interrupt + RTC_IRQHandler, // 68 : RTC Subsystem interrupt (RTC interrupt or Wake timer interrupt) + SMARTDMA_IRQHandler, // 69 : SmartDMA_IRQ + MAILBOX_IRQHandler, // 70 : Inter-CPU Mailbox interrupt0 for CPU0 Inter-CPU Mailbox interrupt1 for CPU1 + CTIMER3_IRQHandler, // 71 : Standard counter/timer 3 interrupt + CTIMER4_IRQHandler, // 72 : Standard counter/timer 4 interrupt + OS_EVENT_IRQHandler, // 73 : OS event timer interrupt + FLEXSPI0_IRQHandler, // 74 : Flexible Serial Peripheral Interface interrupt + SAI0_IRQHandler, // 75 : Serial Audio Interface 0 interrupt + SAI1_IRQHandler, // 76 : Serial Audio Interface 1 interrupt + USDHC0_IRQHandler, // 77 : Ultra Secured Digital Host Controller interrupt + CAN0_IRQHandler, // 78 : Controller Area Network 0 interrupt + CAN1_IRQHandler, // 79 : Controller Area Network 1 interrupt + Reserved80_IRQHandler, // 80 : Reserved interrupt + Reserved81_IRQHandler, // 81 : Reserved interrupt + USB1_HS_PHY_IRQHandler, // 82 : USBHS DCD or USBHS Phy interrupt + USB1_HS_IRQHandler, // 83 : USB High Speed OTG Controller interrupt + SEC_HYPERVISOR_CALL_IRQHandler, // 84 : AHB Secure Controller hypervisor call interrupt + Reserved85_IRQHandler, // 85 : Reserved interrupt + PLU_IRQHandler, // 86 : Programmable Logic Unit interrupt + Freqme_IRQHandler, // 87 : Frequency Measurement interrupt + SEC_VIO_IRQHandler, // 88 : Secure violation interrupt (Memory Block Checker interrupt or secure AHB matrix violation interrupt) + ELS_IRQHandler, // 89 : ELS interrupt + PKC_IRQHandler, // 90 : PKC interrupt + PUF_IRQHandler, // 91 : Physical Unclonable Function interrupt + PQ_IRQHandler, // 92 : Power Quad interrupt + EDMA_1_CH0_IRQHandler, // 93 : eDMA_1_CH0 error or transfer complete + EDMA_1_CH1_IRQHandler, // 94 : eDMA_1_CH1 error or transfer complete + EDMA_1_CH2_IRQHandler, // 95 : eDMA_1_CH2 error or transfer complete + EDMA_1_CH3_IRQHandler, // 96 : eDMA_1_CH3 error or transfer complete + EDMA_1_CH4_IRQHandler, // 97 : eDMA_1_CH4 error or transfer complete + EDMA_1_CH5_IRQHandler, // 98 : eDMA_1_CH5 error or transfer complete + EDMA_1_CH6_IRQHandler, // 99 : eDMA_1_CH6 error or transfer complete + EDMA_1_CH7_IRQHandler, // 100: eDMA_1_CH7 error or transfer complete + EDMA_1_CH8_IRQHandler, // 101: eDMA_1_CH8 error or transfer complete + EDMA_1_CH9_IRQHandler, // 102: eDMA_1_CH9 error or transfer complete + EDMA_1_CH10_IRQHandler, // 103: eDMA_1_CH10 error or transfer complete + EDMA_1_CH11_IRQHandler, // 104: eDMA_1_CH11 error or transfer complete + EDMA_1_CH12_IRQHandler, // 105: eDMA_1_CH12 error or transfer complete + EDMA_1_CH13_IRQHandler, // 106: eDMA_1_CH13 error or transfer complete + EDMA_1_CH14_IRQHandler, // 107: eDMA_1_CH14 error or transfer complete + EDMA_1_CH15_IRQHandler, // 108: eDMA_1_CH15 error or transfer complete + CDOG0_IRQHandler, // 109: Code Watchdog Timer 0 interrupt + CDOG1_IRQHandler, // 110: Code Watchdog Timer 1 interrupt + I3C0_IRQHandler, // 111: Improved Inter Integrated Circuit interrupt 0 + I3C1_IRQHandler, // 112: Improved Inter Integrated Circuit interrupt 1 + NPU_IRQHandler, // 113: NPU interrupt + GDET_IRQHandler, // 114: Digital Glitch Detect 0 interrupt or Digital Glitch Detect 1 interrupt + VBAT0_IRQHandler, // 115: VBAT interrupt( VBAT interrupt or digital tamper interrupt) + EWM0_IRQHandler, // 116: External Watchdog Monitor interrupt + TSI_END_OF_SCAN_IRQHandler, // 117: TSI End of Scan interrupt + TSI_OUT_OF_SCAN_IRQHandler, // 118: TSI Out of Scan interrupt + EMVSIM0_IRQHandler, // 119: EMVSIM0 interrupt + EMVSIM1_IRQHandler, // 120: EMVSIM1 interrupt + FLEXIO_IRQHandler, // 121: Flexible Input/Output interrupt + DAC0_IRQHandler, // 122: Digital-to-Analog Converter 0 - General Purpose interrupt + DAC1_IRQHandler, // 123: Digital-to-Analog Converter 1 - General Purpose interrupt + DAC2_IRQHandler, // 124: 14-bit Digital-to-Analog Converter interrupt + HSCMP0_IRQHandler, // 125: High-Speed comparator0 interrupt + HSCMP1_IRQHandler, // 126: High-Speed comparator1 interrupt + HSCMP2_IRQHandler, // 127: High-Speed comparator2 interrupt + FLEXPWM0_RELOAD_ERROR_IRQHandler, // 128: FlexPWM0_reload_error interrupt + FLEXPWM0_FAULT_IRQHandler, // 129: FlexPWM0_fault interrupt + FLEXPWM0_SUBMODULE0_IRQHandler, // 130: FlexPWM0 Submodule 0 capture/compare/reload interrupt + FLEXPWM0_SUBMODULE1_IRQHandler, // 131: FlexPWM0 Submodule 1 capture/compare/reload interrupt + FLEXPWM0_SUBMODULE2_IRQHandler, // 132: FlexPWM0 Submodule 2 capture/compare/reload interrupt + FLEXPWM0_SUBMODULE3_IRQHandler, // 133: FlexPWM0 Submodule 3 capture/compare/reload interrupt + FLEXPWM1_RELOAD_ERROR_IRQHandler, // 134: FlexPWM1_reload_error interrupt + FLEXPWM1_FAULT_IRQHandler, // 135: FlexPWM1_fault interrupt + FLEXPWM1_SUBMODULE0_IRQHandler, // 136: FlexPWM1 Submodule 0 capture/compare/reload interrupt + FLEXPWM1_SUBMODULE1_IRQHandler, // 137: FlexPWM1 Submodule 1 capture/compare/reload interrupt + FLEXPWM1_SUBMODULE2_IRQHandler, // 138: FlexPWM1 Submodule 2 capture/compare/reload interrupt + FLEXPWM1_SUBMODULE3_IRQHandler, // 139: FlexPWM1 Submodule 3 capture/compare/reload interrupt + ENC0_COMPARE_IRQHandler, // 140: ENC0_Compare interrupt + ENC0_HOME_IRQHandler, // 141: ENC0_Home interrupt + ENC0_WDG_SAB_IRQHandler, // 142: ENC0_WDG_IRQ/SAB interrupt + ENC0_IDX_IRQHandler, // 143: ENC0_IDX interrupt + ENC1_COMPARE_IRQHandler, // 144: ENC1_Compare interrupt + ENC1_HOME_IRQHandler, // 145: ENC1_Home interrupt + ENC1_WDG_SAB_IRQHandler, // 146: ENC1_WDG_IRQ/SAB interrupt + ENC1_IDX_IRQHandler, // 147: ENC1_IDX interrupt + ITRC0_IRQHandler, // 148: Intrusion and Tamper Response Controller interrupt + BSP32_IRQHandler, // 149: CoolFlux BSP32 interrupt + ELS_ERR_IRQHandler, // 150: ELS error interrupt + PKC_ERR_IRQHandler, // 151: PKC error interrupt + ERM_SINGLE_BIT_ERROR_IRQHandler, // 152: ERM Single Bit error interrupt + ERM_MULTI_BIT_ERROR_IRQHandler, // 153: ERM Multi Bit error interrupt + FMU0_IRQHandler, // 154: Flash Management Unit interrupt + ETHERNET_IRQHandler, // 155: Ethernet QoS interrupt + ETHERNET_PMT_IRQHandler, // 156: Ethernet QoS power management interrupt + ETHERNET_MACLP_IRQHandler, // 157: Ethernet QoS MAC interrupt + SINC_FILTER_IRQHandler, // 158: SINC Filter interrupt + LPTMR0_IRQHandler, // 159: Low Power Timer 0 interrupt + LPTMR1_IRQHandler, // 160: Low Power Timer 1 interrupt + SCG_IRQHandler, // 161: System Clock Generator interrupt + SPC_IRQHandler, // 162: System Power Controller interrupt + WUU_IRQHandler, // 163: Wake Up Unit interrupt + PORT_EFT_IRQHandler, // 164: PORT0~5 EFT interrupt + ETB0_IRQHandler, // 165: ETB counter expires interrupt + SM3_IRQHandler, // 166: Secure Generic Interface (SGI) SAFO interrupt + TRNG0_IRQHandler, // 167: True Random Number Generator interrupt + WWDT0_IRQHandler, // 168: Windowed Watchdog Timer 0 interrupt + WWDT1_IRQHandler, // 169: Windowed Watchdog Timer 1 interrupt + CMC0_IRQHandler, // 170: Core Mode Controller interrupt + CTI0_IRQHandler, // 171: Cross Trigger Interface interrupt +}; + +__attribute__((naked, noreturn)) void Reset_Handler(void) { + // Clear BSS section, and copy data section from flash to RAM + extern long _sbss, _ebss, _sdata, _edata, _sidata; + for (long *src = &_sbss; src < &_ebss; src++) *src = 0; + for (long *src = &_sdata, *dst = &_sidata; src < &_edata;) *src++ = *dst++; + + SCB->VTOR = (uint32_t) &tab; + SystemInit(); + + // Call main() + extern void main(void); + main(); + for (;;) (void) 0; // Infinite loop +} + +void Default_Handler(void) { + for (;;) (void) 0; +} \ No newline at end of file From 10f56c55e61f1499a392de914655476d910eb722 Mon Sep 17 00:00:00 2001 From: "Sergio R. Caprile" Date: Tue, 7 May 2024 14:28:35 -0300 Subject: [PATCH 2/2] Add FRDM-MCXN947 --- .../Makefile | 20 +- .../frdm-mcxn947-make-baremetal-builtin/hal.c | 52 ++- .../frdm-mcxn947-make-baremetal-builtin/hal.h | 183 +++++++-- .../link.ld | 1 + .../main.c | 33 +- .../mongoose.c | 1 + .../mongoose.h | 1 + .../mongoose_config.h | 25 ++ .../frdm-mcxn947-make-baremetal-builtin/net.c | 1 + .../frdm-mcxn947-make-baremetal-builtin/net.h | 1 + .../packed_fs.c | 1 + .../startup.c | 369 ++++++++++-------- .../hal.h | 1 + .../nucleo-f429zi-make-freertos-builtin/hal.h | 1 + .../hal.h | 1 + .../hal.h | 1 + .../nucleo-f746zg-make-freertos-builtin/hal.h | 1 + .../hal.h | 1 + .../nucleo-h563zi-make-freertos-builtin/hal.h | 1 + .../hal.h | 1 + .../nucleo-h723zg-make-freertos-builtin/hal.h | 1 + .../hal.h | 1 + .../nucleo-h743zi-make-freertos-builtin/hal.h | 1 + .../hal.h | 1 + .../stm32h573i-dk-make-freertos-builtin/hal.h | 1 + .../hal.h | 1 + 26 files changed, 494 insertions(+), 208 deletions(-) create mode 120000 examples/nxp/frdm-mcxn947-make-baremetal-builtin/mongoose.c create mode 120000 examples/nxp/frdm-mcxn947-make-baremetal-builtin/mongoose.h create mode 100644 examples/nxp/frdm-mcxn947-make-baremetal-builtin/mongoose_config.h create mode 120000 examples/nxp/frdm-mcxn947-make-baremetal-builtin/net.c create mode 120000 examples/nxp/frdm-mcxn947-make-baremetal-builtin/net.h create mode 120000 examples/nxp/frdm-mcxn947-make-baremetal-builtin/packed_fs.c diff --git a/examples/nxp/frdm-mcxn947-make-baremetal-builtin/Makefile b/examples/nxp/frdm-mcxn947-make-baremetal-builtin/Makefile index 112384634f..963231e864 100644 --- a/examples/nxp/frdm-mcxn947-make-baremetal-builtin/Makefile +++ b/examples/nxp/frdm-mcxn947-make-baremetal-builtin/Makefile @@ -1,19 +1,21 @@ CFLAGS = -W -Wall -Wextra -Werror -Wundef -Wshadow -Wdouble-promotion CFLAGS += -Wformat-truncation -fno-common # -Wconversion is not SDK-friendly CFLAGS += -g3 -Os -ffunction-sections -fdata-sections -CFLAGS += -I. -Icmsis_core/CMSIS/Core/Include -Icmsis_n94/devices/MCXN947/ -CFLAGS += -Icmsis_n94/devices/MCXN947/drivers +CFLAGS += -I. -Icmsis_core/CMSIS/Core/Include -Icmsis_mcu/devices/MCXN947/ +CFLAGS += -Icmsis_mcu/devices/MCXN947/drivers CFLAGS += -DCPU_MCXN947VDF -DCPU_MCXN947VDF_cm33 -DCPU_MCXN947VDF_cm33_core0 -CFLAGS += -mcpu=cortex-m33 -mthumb -mfloat-abi=hard -mfpu=fpv5-d16 $(CFLAGS_EXTRA) +CFLAGS += -mcpu=cortex-m33 -mthumb -mfloat-abi=hard -mfpu=fpv5-sp-d16 $(CFLAGS_EXTRA) +CFLAGS += -Wno-old-style-declaration -Wno-unused-parameter # due to NXP FSL code + LDSCRIPT = link.ld LDFLAGS ?= -T$(LDSCRIPT) -nostdlib -nostartfiles --specs nano.specs -lc -lgcc -Wl,--gc-sections -Wl,-Map=$@.map SOURCES = main.c hal.c SOURCES += startup.c -CFLAGS += -D__ATOLLIC__ -D__STARTUP_CLEAR_BSS # Make startup code work as expected +SOURCES += cmsis_mcu/devices/MCXN947/drivers/fsl_clock.c cmsis_mcu/devices/MCXN947/drivers/fsl_spc.c cmsis_mcu/devices/MCXN947/drivers/fsl_common_arm.c # NXP support files -# Mongoose options are defined in mongoose_custom.h -#SOURCES += mongoose.c packed_fs.c +# Mongoose options are defined in mongoose_config.h +SOURCES += mongoose.c net.c packed_fs.c # Example specific build options. See README.md CFLAGS += -DHTTP_URL=\"http://0.0.0.0/\" -DHTTPS_URL=\"https://0.0.0.0/\" @@ -29,15 +31,15 @@ all build example: firmware.bin firmware.bin: firmware.elf arm-none-eabi-objcopy -O binary $< $@ -firmware.elf: cmsis_core cmsis_n94 $(SOURCES) hal.h link.ld Makefile +firmware.elf: cmsis_core cmsis_mcu $(SOURCES) hal.h link.ld Makefile arm-none-eabi-gcc $(SOURCES) $(CFLAGS) $(LDFLAGS) -o $@ arm-none-eabi-size $@ cmsis_core: # ARM CMSIS core headers git clone -q --depth 1 -b 5.9.0 https://github.com/ARM-software/CMSIS_5 $@ -cmsis_n94: +cmsis_mcu: wget -O $@.zip https://mcuxpresso.nxp.com/cmsis_pack/repo/NXP.MCXN947_DFP.17.0.0.pack mkdir $@ && cd $@ && unzip -q ../$@.zip clean: - $(RM) firmware.* *.su cmsis_core cmsis_n94 *.zip + $(RM) firmware.* *.su cmsis_core cmsis_mcu *.zip diff --git a/examples/nxp/frdm-mcxn947-make-baremetal-builtin/hal.c b/examples/nxp/frdm-mcxn947-make-baremetal-builtin/hal.c index d0240e6ad5..aa46571659 100644 --- a/examples/nxp/frdm-mcxn947-make-baremetal-builtin/hal.c +++ b/examples/nxp/frdm-mcxn947-make-baremetal-builtin/hal.c @@ -8,12 +8,14 @@ void SysTick_Handler(void) { // SyStick IRQ handler, triggered every 1ms s_ticks++; } +#if 0 void mg_random(void *buf, size_t len) { // Use on-board RNG for (size_t n = 0; n < len; n += sizeof(uint32_t)) { uint32_t r = rng_read(); memcpy((char *) buf + n, &r, n + sizeof(r) > len ? len - n : sizeof(r)); } } +#endif uint64_t mg_millis(void) { // Let Mongoose use our uptime function return s_ticks; // Return number of milliseconds since boot @@ -23,13 +25,16 @@ void hal_init(void) { clock_init(); // Set system clock to SYS_FREQUENCY SystemCoreClock = SYS_FREQUENCY; // Update SystemCoreClock global var SysTick_Config(SystemCoreClock / 1000); // Sys tick every 1ms - rng_init(); // Initialise random number generator + // rng_init(); // TRNG is part of ELS and there is no info on that uart_init(UART_DEBUG, 115200); // Initialise UART gpio_output(LED1); // Initialise LED1 - gpio_output(LED2); // Initialise LED2 - gpio_output(LED3); // Initialise LED3 - ethernet_init(); // Initialise Ethernet pins + gpio_write(LED1, 1); + gpio_output(LED2); // Initialise LED2 + gpio_write(LED2, 1); + gpio_output(LED3); // Initialise LED3 + gpio_write(LED3, 1); + ethernet_init(); // Initialise Ethernet pins } #if defined(__ARMCC_VERSION) @@ -46,15 +51,49 @@ int fputc(int c, FILE *stream) { // the rest are just stubs #include // For _fstat() +#if !defined(__MCUXPRESSO) uint32_t SystemCoreClock; +// evaluate your use of Secure/non-Secure and modify accordingly void SystemInit(void) { // Called automatically by startup code -} + SCB->CPACR |= +#if 0 + (3UL << 0 * 2) | (3UL << 1 * 2) | // Enable PowerQuad (CPO/CP1) +#endif + (3UL << 10 * 2) | (3UL << 11 * 2); // Enable FPU + __DSB(); + __ISB(); + SYSCON->LPCAC_CTRL &= ~SYSCON_LPCAC_CTRL_DIS_LPCAC_MASK; // enable LPCAC +// Read TRM 36.1 and decide whether you really want to enable aGDET and dGDET +#if 1 + // Disable aGDET and dGDET + ITRC0->OUT_SEL[4][0] = + (ITRC0->OUT_SEL[4][0] & ~ITRC_OUTX_SEL_OUTX_SELY_OUT_SEL_IN9_SELn_MASK) | + (ITRC_OUTX_SEL_OUTX_SELY_OUT_SEL_IN9_SELn(0x2)); + ITRC0->OUT_SEL[4][1] = + (ITRC0->OUT_SEL[4][1] & ~ITRC_OUTX_SEL_OUTX_SELY_OUT_SEL_IN9_SELn_MASK) | + (ITRC_OUTX_SEL_OUTX_SELY_OUT_SEL_IN9_SELn(0x2)); + SPC0->ACTIVE_CFG |= SPC_ACTIVE_CFG_GLITCH_DETECT_DISABLE_MASK; + SPC0->GLITCH_DETECT_SC &= ~SPC_GLITCH_DETECT_SC_LOCK_MASK; + SPC0->GLITCH_DETECT_SC = 0x3C; + SPC0->GLITCH_DETECT_SC |= SPC_GLITCH_DETECT_SC_LOCK_MASK; + ITRC0->OUT_SEL[4][0] = + (ITRC0->OUT_SEL[4][0] & ~ITRC_OUTX_SEL_OUTX_SELY_OUT_SEL_IN0_SELn_MASK) | + (ITRC_OUTX_SEL_OUTX_SELY_OUT_SEL_IN0_SELn(0x2)); + ITRC0->OUT_SEL[4][1] = + (ITRC0->OUT_SEL[4][1] & ~ITRC_OUTX_SEL_OUTX_SELY_OUT_SEL_IN0_SELn_MASK) | + (ITRC_OUTX_SEL_OUTX_SELY_OUT_SEL_IN0_SELn(0x2)); + GDET0->GDET_ENABLE1 = 0; + GDET1->GDET_ENABLE1 = 0; +#endif +} +#endif int _fstat(int fd, struct stat *st) { (void) fd, (void) st; return -1; } +#if !defined(__MCUXPRESSO) extern unsigned char _end[]; // End of data section, start of heap. See link.ld static unsigned char *s_current_heap_end = _end; @@ -76,6 +115,7 @@ void *_sbrk(int incr) { s_current_heap_end += incr; return prev_heap; } +#endif int _open(const char *path) { (void) path; @@ -143,4 +183,4 @@ int mkdir(const char *path, mode_t mode) { void _init(void) { } -#endif // __GNUC__ +#endif // __GNUC__ diff --git a/examples/nxp/frdm-mcxn947-make-baremetal-builtin/hal.h b/examples/nxp/frdm-mcxn947-make-baremetal-builtin/hal.h index 4dce3eecb0..ccd8b2b389 100644 --- a/examples/nxp/frdm-mcxn947-make-baremetal-builtin/hal.h +++ b/examples/nxp/frdm-mcxn947-make-baremetal-builtin/hal.h @@ -8,12 +8,12 @@ #include #include -#define LED1 PIN(0, 0) -#define LED2 LED1 -#define LED3 LED1 +#define LED1 PIN(0, 10) +#define LED2 PIN(0, 27) +#define LED3 PIN(1, 2) #ifndef UART_DEBUG -#define UART_DEBUG 0 +#define UART_DEBUG LPUART4 #endif #include "MCXN947_cm33_core0.h" @@ -32,59 +32,192 @@ static inline void spin(volatile uint32_t count) { while (count--) (void) 0; } -#define SYS_FREQUENCY 48000000UL +#define SYS_FREQUENCY 150000000UL -//static GPIO_TypeDef *gpio_bank(uint16_t pin) { return GPIO(PINBANK(pin)); } +enum { GPIO_MODE_INPUT, GPIO_MODE_OUTPUT }; +enum { GPIO_OTYPE_PUSH_PULL, GPIO_OTYPE_OPEN_DRAIN }; +enum { GPIO_SPEED_LOW, GPIO_SPEED_HIGH }; +enum { GPIO_PULL_NONE, GPIO_PULL_DOWN, GPIO_PULL_UP }; +static inline GPIO_Type *gpio_bank(uint16_t pin) { + static GPIO_Type *const g[] = GPIO_BASE_PTRS; + return g[PINBANK(pin)]; +} static inline void gpio_init(uint16_t pin, uint8_t mode, uint8_t type, uint8_t speed, uint8_t pull, uint8_t af) { - (void) pin, (void) mode, (void) type, (void) speed, (void) pull, (void) af; + static PORT_Type *const p[] = PORT_BASE_PTRS; + PORT_Type *port = p[PINBANK(pin)]; + GPIO_Type *gpio = gpio_bank(pin); + uint32_t mask = (uint32_t) BIT(PINNO(pin)); + bool dopull = pull > 0; + if (dopull) --pull; + if (gpio != GPIO5) { + SYSCON->AHBCLKCTRL0 |= + (1 << (SYSCON_AHBCLKCTRL0_GPIO0_SHIFT + PINBANK(pin))) | + (1 << (SYSCON_AHBCLKCTRL0_PORT0_SHIFT + PINBANK(pin))); + }; + port->PCR[PINNO(pin)] = PORT_PCR_IBE(1) | PORT_PCR_MUX(af) | PORT_PCR_DSE(1) | + PORT_PCR_ODE(type) | + PORT_PCR_SRE(speed != GPIO_SPEED_HIGH) | + PORT_PCR_PE(dopull) | PORT_PCR_PS(pull); + gpio->ICR[PINNO(pin)] = GPIO_ICR_ISF_MASK; + if (mode == GPIO_MODE_INPUT) { + gpio->PDDR &= ~mask; + } else { + gpio->PDDR |= mask; + } } static inline void gpio_input(uint16_t pin) { - (void) pin; + gpio_init(pin, GPIO_MODE_INPUT, GPIO_OTYPE_PUSH_PULL, GPIO_SPEED_LOW, + GPIO_PULL_NONE, 0); } - static inline void gpio_output(uint16_t pin) { - (void) pin; + gpio_init(pin, GPIO_MODE_OUTPUT, GPIO_OTYPE_PUSH_PULL, GPIO_SPEED_LOW, + GPIO_PULL_NONE, 0); } static inline bool gpio_read(uint16_t pin) { - (void) pin; - return false; + GPIO_Type *gpio = gpio_bank(pin); + return gpio->PDR[PINNO(pin)]; } static inline void gpio_write(uint16_t pin, bool value) { - (void) pin, (void) value; + GPIO_Type *gpio = gpio_bank(pin); + if (value) { + gpio->PDR[PINNO(pin)] = 1; + } else { + gpio->PDR[PINNO(pin)] = 0; + } } static inline void gpio_toggle(uint16_t pin) { - gpio_write(pin, !gpio_read(pin)); + GPIO_Type *gpio = gpio_bank(pin); + uint32_t mask = (uint32_t) BIT(PINNO(pin)); + gpio->PTOR = mask; } -static inline void uart_init(void *uart, unsigned long baud) { - (void) uart, (void) baud; +// MCU-Link UART (P1_9/8; FC4_P1/0) +// Arduino J1_2/4 UART (P4_3/2; FC2_P3/2) +// 33.3.23 LP_FLEXCOMM clocking +// 66.2.4 LP_FLEXCOMM init +// 66.5 LPUART +static inline void uart_init(LPUART_Type *uart, unsigned long baud) { + static LP_FLEXCOMM_Type *const f[] = LP_FLEXCOMM_BASE_PTRS; + uint8_t af = 2, fc = 0; // Alternate function, FlexComm instance + uint16_t pr = 0, pt = 0; // pins + uint32_t freq = 12000000; // fro_12_m + if (uart == LPUART2) fc = 2, pt = PIN(4, 3), pr = PIN(4, 2); + if (uart == LPUART4) fc = 4, pt = PIN(1, 9), pr = PIN(1, 8); + + SYSCON->AHBCLKCTRL1 |= (1 << (SYSCON_AHBCLKCTRL1_FC0_SHIFT + fc)); + SYSCON->PRESETCTRL1 |= (1 << (SYSCON_PRESETCTRL1_FC0_RST_SHIFT + fc)); + SYSCON->PRESETCTRL1 &= ~(1 << (SYSCON_PRESETCTRL1_FC0_RST_SHIFT + fc)); + SYSCON->FCCLKSEL[fc] = SYSCON_FCCLKSEL_SEL(2); // clock from FRO_12M / 1 + SYSCON->FLEXCOMMCLKDIV[fc] = SYSCON_FLEXCOMMXCLKDIV_FLEXCOMMCLKDIV_DIV(0); + LP_FLEXCOMM_Type *flexcomm = f[fc]; + flexcomm->PSELID = LP_FLEXCOMM_PSELID_PERSEL(1); // configure as UART + gpio_init(pt, GPIO_MODE_OUTPUT, GPIO_OTYPE_PUSH_PULL, GPIO_SPEED_LOW, + GPIO_PULL_UP, af); + gpio_init(pr, GPIO_MODE_INPUT, GPIO_OTYPE_PUSH_PULL, GPIO_SPEED_LOW, + GPIO_PULL_UP, af); + + uart->GLOBAL |= LPUART_GLOBAL_RST_MASK; // reset, CTRL = 0, defaults + uart->GLOBAL &= ~LPUART_GLOBAL_RST_MASK; + // use a weird oversample ratio of 26x to fit specs, standard 16x won't do + CLRSET(uart->BAUD, + LPUART_BAUD_OSR_MASK | LPUART_BAUD_SBR_MASK | LPUART_BAUD_SBNS_MASK, + LPUART_BAUD_OSR(26 - 1) | LPUART_BAUD_SBR(freq / (26 * baud))); + CLRSET(uart->CTRL, + LPUART_CTRL_PE_MASK | LPUART_CTRL_M_MASK | LPUART_CTRL_ILT_MASK | + LPUART_CTRL_IDLECFG_MASK, + LPUART_CTRL_IDLECFG(1) | LPUART_CTRL_ILT(1) | + LPUART_BAUD_SBNS(0)); // no parity, idle 2 chars after 1 stop bit + uart->CTRL |= LPUART_CTRL_TE_MASK | LPUART_CTRL_RE_MASK; } -static inline void uart_write_byte(void *uart, uint8_t byte) { - (void) uart, (void) byte; +static inline void uart_write_byte(LPUART_Type *uart, uint8_t byte) { + uart->DATA = byte; + while ((uart->STAT & LPUART_STAT_TDRE_MASK) == 0) spin(1); } - -static inline void uart_write_buf(void *uart, char *buf, size_t len) { - while (len-- > 0) uart_write_byte(uart, *(uint8_t *) buf++); +static inline void uart_write_buf(LPUART_Type *uart, char *buf, size_t len) { + while (len-- > 0) uart_write_byte(uart, *(uint8_t *) buf++); } static inline void rng_init(void) { } static inline uint32_t rng_read(void) { - return 0; + return 42; } +// - PHY and MAC clocked via a 50MHz oscillator, P1_4 (ENET0_TXCLK) +// - 33.3.30 ENET clocking +// - SMI clocked from AHB module clock (CSR) +// - PHY RST connected to P5_8 +// - PHY RXD0,1,DV = 1 on RST enable autonegotiation, no hw pull-ups static inline void ethernet_init(void) { + // '0' in clk_rmii, set for RMII mode + SYSCON->ENETRMIICLKSEL = SYSCON_ENETRMIICLKSEL_SEL(0); + SYSCON->ENETRMIICLKDIV = SYSCON_ENETRMIICLKDIV_DIV(0); + SYSCON->AHBCLKCTRL2 |= SYSCON_AHBCLKCTRL2_ENET_MASK; // enable bus clk + SYSCON0->PRESETCTRL2 = SYSCON_PRESETCTRL2_ENET_RST_MASK; // reset MAC + SYSCON0->PRESETCTRL2 &= ~SYSCON_PRESETCTRL2_ENET_RST_MASK; // then set RMII + SYSCON0->ENET_PHY_INTF_SEL |= SYSCON_ENET_PHY_INTF_SEL_PHY_SEL_MASK; + gpio_init(PIN(5, 8), GPIO_MODE_OUTPUT, GPIO_OTYPE_PUSH_PULL, GPIO_SPEED_LOW, + GPIO_PULL_NONE, 0); // set P5_8 as GPIO (PHY \RST) + gpio_write(PIN(5, 8), 0); // reset PHY + gpio_init(PIN(1, 4), GPIO_MODE_INPUT, GPIO_OTYPE_PUSH_PULL, GPIO_SPEED_HIGH, + GPIO_PULL_NONE, 9); // set P1_4 as ENET0_TXCLK + gpio_init(PIN(1, 5), GPIO_MODE_OUTPUT, GPIO_OTYPE_PUSH_PULL, GPIO_SPEED_HIGH, + GPIO_PULL_NONE, 9); // set P1_5 as ENET0_TXEN + gpio_init(PIN(1, 6), GPIO_MODE_OUTPUT, GPIO_OTYPE_PUSH_PULL, GPIO_SPEED_HIGH, + GPIO_PULL_NONE, 9); // set P1_6 as ENET0_TXD0 + gpio_init(PIN(1, 7), GPIO_MODE_OUTPUT, GPIO_OTYPE_PUSH_PULL, GPIO_SPEED_HIGH, + GPIO_PULL_NONE, 9); // set P1_7 as ENET0_TXD1 + gpio_init(PIN(1, 13), GPIO_MODE_INPUT, GPIO_OTYPE_PUSH_PULL, GPIO_SPEED_HIGH, + GPIO_PULL_UP, 9); // set P1_13 as ENET0_RXDV + gpio_init(PIN(1, 14), GPIO_MODE_INPUT, GPIO_OTYPE_PUSH_PULL, GPIO_SPEED_HIGH, + GPIO_PULL_UP, 9); // set P1_14 as ENET0_RXD0 + gpio_init(PIN(1, 15), GPIO_MODE_INPUT, GPIO_OTYPE_PUSH_PULL, GPIO_SPEED_HIGH, + GPIO_PULL_UP, 9); // set P1_15 as ENET0_RXD1 + gpio_init(PIN(1, 20), GPIO_MODE_OUTPUT, GPIO_OTYPE_PUSH_PULL, GPIO_SPEED_HIGH, + GPIO_PULL_NONE, 9); // set P1_20 as ENET0_MDC + gpio_init(PIN(1, 21), GPIO_MODE_OUTPUT, GPIO_OTYPE_PUSH_PULL, GPIO_SPEED_HIGH, + GPIO_PULL_NONE, 9); // set P1_21 as ENET0_MDIO + spin(10000); // keep PHY RST low for a while + gpio_write(PIN(5, 8), 1); // deassert RST + NVIC_EnableIRQ(ETHERNET_IRQn); // Setup Ethernet IRQ handler } +#include "fsl_clock.h" +#include "fsl_spc.h" + +// 33.2 Figure 127 SCG main clock static inline void clock_init(void) { - SCB->CPACR |= ((3UL << 10 * 2) | (3UL << 11 * 2)); // Enable FPU - asm("DSB"); - asm("ISB"); + SYSCON->AHBCLKCTRL2 |= SYSCON_AHBCLKCTRL2_SCG_MASK; // enable SCG clk + CLRSET(SCG0->RCCR, SCG_CSR_SCS_MASK, SCG_CSR_SCS(2)); // clock main_clock + spc_active_mode_dcdc_option_t dcdc = { + .DCDCVoltage = kSPC_DCDC_OverdriveVoltage, + .DCDCDriveStrength = kSPC_DCDC_NormalDriveStrength}; + SPC_SetActiveModeDCDCRegulatorConfig(SPC0, &dcdc); // Set DCDC to 1.2 V + spc_active_mode_core_ldo_option_t ldo = { + .CoreLDOVoltage = kSPC_CoreLDO_OverDriveVoltage, + .CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength}; + SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldo); // Set LDO_CORE to 1.2 V + CLRSET(FMU0->FCTRL, FMU_FCTRL_RWSC_MASK, FMU_FCTRL_RWSC(3)); // Set Flash WS + spc_sram_voltage_config_t sram = {.operateVoltage = kSPC_sramOperateAt1P2V, + .requestVoltageUpdate = true}; + SPC_SetSRAMOperateVoltage(SPC0, &sram); // Set SRAM timing for 1.2V + CLOCK_SetupFROHFClocking(48000000U); // Enable FRO HF + const pll_setup_t pll0 = {.pllctrl = SCG_APLLCTRL_SOURCE(1U) | + SCG_APLLCTRL_SELI(27U) | + SCG_APLLCTRL_SELP(13U), + .pllndiv = SCG_APLLNDIV_NDIV(8U), + .pllpdiv = SCG_APLLPDIV_PDIV(1U), + .pllmdiv = SCG_APLLMDIV_MDIV(50U), + .pllRate = 150000000U}; + CLOCK_SetPLL0Freq(&pll0); // Setup PLL0 (APLL), + CLOCK_SetPll0MonitorMode(0); // disable monitor mode + CLRSET(SCG0->RCCR, SCG_CSR_SCS_MASK, SCG_CSR_SCS(5)); // clock main_clock + SYSCON->AHBCLKDIV = SYSCON_AHBCLKDIV_DIV(0); // /1 } diff --git a/examples/nxp/frdm-mcxn947-make-baremetal-builtin/link.ld b/examples/nxp/frdm-mcxn947-make-baremetal-builtin/link.ld index 4de06c9d38..042b9e6df7 100644 --- a/examples/nxp/frdm-mcxn947-make-baremetal-builtin/link.ld +++ b/examples/nxp/frdm-mcxn947-make-baremetal-builtin/link.ld @@ -5,6 +5,7 @@ ENTRY(Reset_Handler) MEMORY { flash(RX) : ORIGIN = 0x0, LENGTH = 0x100000 + flash2(RX) : ORIGIN = 0x100000, LENGTH = 0x100000 sram(!RX) : ORIGIN = 0x20000000, LENGTH = 0x60000 } diff --git a/examples/nxp/frdm-mcxn947-make-baremetal-builtin/main.c b/examples/nxp/frdm-mcxn947-make-baremetal-builtin/main.c index 0d76150f2b..0c3d910c64 100644 --- a/examples/nxp/frdm-mcxn947-make-baremetal-builtin/main.c +++ b/examples/nxp/frdm-mcxn947-make-baremetal-builtin/main.c @@ -1,5 +1,32 @@ +// Copyright (c) 2024 Cesanta Software Limited +// All rights reserved + #include "hal.h" +#include "mongoose.h" +#include "net.h" + +#define BLINK_PERIOD_MS 1000 + +static void timer_fn(void *arg) { + gpio_toggle(LED1); // Blink LED + (void) arg; // Unused +} + +int main(void) { + struct mg_mgr mgr; // Mongoose event manager + + hal_init(); // Cross-platform hardware init + + mg_mgr_init(&mgr); // Initialise it + mg_log_set(MG_LL_DEBUG); // Set log level to debug + mg_timer_add(&mgr, BLINK_PERIOD_MS, MG_TIMER_REPEAT, timer_fn, &mgr); + + MG_INFO(("Initialising application...")); + web_init(&mgr); + + for (;;) { + mg_mgr_poll(&mgr, 0); + } -int main() { - for (;;); -} \ No newline at end of file + return 0; +} diff --git a/examples/nxp/frdm-mcxn947-make-baremetal-builtin/mongoose.c b/examples/nxp/frdm-mcxn947-make-baremetal-builtin/mongoose.c new file mode 120000 index 0000000000..5e522bbcd4 --- /dev/null +++ b/examples/nxp/frdm-mcxn947-make-baremetal-builtin/mongoose.c @@ -0,0 +1 @@ +../../../mongoose.c \ No newline at end of file diff --git a/examples/nxp/frdm-mcxn947-make-baremetal-builtin/mongoose.h b/examples/nxp/frdm-mcxn947-make-baremetal-builtin/mongoose.h new file mode 120000 index 0000000000..ee4ac82323 --- /dev/null +++ b/examples/nxp/frdm-mcxn947-make-baremetal-builtin/mongoose.h @@ -0,0 +1 @@ +../../../mongoose.h \ No newline at end of file diff --git a/examples/nxp/frdm-mcxn947-make-baremetal-builtin/mongoose_config.h b/examples/nxp/frdm-mcxn947-make-baremetal-builtin/mongoose_config.h new file mode 100644 index 0000000000..c5c22aac6e --- /dev/null +++ b/examples/nxp/frdm-mcxn947-make-baremetal-builtin/mongoose_config.h @@ -0,0 +1,25 @@ +#pragma once + +// See https://mongoose.ws/documentation/#build-options +#define MG_ARCH MG_ARCH_NEWLIB + +#define MG_ENABLE_TCPIP 1 +#define MG_ENABLE_DRIVER_MCXN 1 +#define MG_ENABLE_CUSTOM_MILLIS 1 +//#define MG_ENABLE_CUSTOM_RANDOM 1 +#define MG_ENABLE_PACKED_FS 1 + +// For static IP configuration, define MG_TCPIP_{IP,MASK,GW} +// By default, those are set to zero, meaning that DHCP is used +// +// #define MG_TCPIP_IP MG_IPV4(192, 168, 1, 10) +// #define MG_TCPIP_GW MG_IPV4(192, 168, 1, 1) +// #define MG_TCPIP_MASK MG_IPV4(255, 255, 255, 0) + +// Set custom MAC address. By default, it is randomly generated +// Using a build-time constant: +// #define MG_SET_MAC_ADDRESS(mac) do { uint8_t buf_[6] = {2,3,4,5,6,7}; memmove(mac, buf_, sizeof(buf_)); } while (0) +// +// Using custom function: +// extern void my_function(unsigned char *mac); +// #define MG_SET_MAC_ADDRESS(mac) my_function(mac) diff --git a/examples/nxp/frdm-mcxn947-make-baremetal-builtin/net.c b/examples/nxp/frdm-mcxn947-make-baremetal-builtin/net.c new file mode 120000 index 0000000000..fe0e6f06e7 --- /dev/null +++ b/examples/nxp/frdm-mcxn947-make-baremetal-builtin/net.c @@ -0,0 +1 @@ +../../device-dashboard/net.c \ No newline at end of file diff --git a/examples/nxp/frdm-mcxn947-make-baremetal-builtin/net.h b/examples/nxp/frdm-mcxn947-make-baremetal-builtin/net.h new file mode 120000 index 0000000000..9de896ef4e --- /dev/null +++ b/examples/nxp/frdm-mcxn947-make-baremetal-builtin/net.h @@ -0,0 +1 @@ +../../device-dashboard/net.h \ No newline at end of file diff --git a/examples/nxp/frdm-mcxn947-make-baremetal-builtin/packed_fs.c b/examples/nxp/frdm-mcxn947-make-baremetal-builtin/packed_fs.c new file mode 120000 index 0000000000..e06bf09258 --- /dev/null +++ b/examples/nxp/frdm-mcxn947-make-baremetal-builtin/packed_fs.c @@ -0,0 +1 @@ +../../device-dashboard/packed_fs.c \ No newline at end of file diff --git a/examples/nxp/frdm-mcxn947-make-baremetal-builtin/startup.c b/examples/nxp/frdm-mcxn947-make-baremetal-builtin/startup.c index 51245b660d..0ab97c1bf0 100644 --- a/examples/nxp/frdm-mcxn947-make-baremetal-builtin/startup.c +++ b/examples/nxp/frdm-mcxn947-make-baremetal-builtin/startup.c @@ -177,147 +177,176 @@ WEAK_ALIAS void CMC0_IRQHandler(void); WEAK_ALIAS void CTI0_IRQHandler(void); __attribute__((section(".vectors"))) void (*const tab[16 + 156])(void) = { - _estack, - Reset_Handler, - NMI_Handler, // NMI Handler - HardFault_Handler, // Hard Fault Handler - MemManage_Handler, // MPU Fault Handler - BusFault_Handler, // Bus Fault Handler - UsageFault_Handler, // Usage Fault Handler - SecureFault_Handler, // Secure Fault Handler - 0, // Reserved - 0, // Reserved - 0, // Reserved - SVC_Handler, // SVCall Handler - DebugMon_Handler, // Debug Monitor Handler - 0, // Reserved - PendSV_Handler, // PendSV Handler - SysTick_Handler, // SysTick Handler - // Chip Level - MCXN947_cm33_core0 - OR_IRQHandler, // 16 : OR IRQ - EDMA_0_CH0_IRQHandler, // 17 : eDMA_0_CH0 error or transfer complete - EDMA_0_CH1_IRQHandler, // 18 : eDMA_0_CH1 error or transfer complete - EDMA_0_CH2_IRQHandler, // 19 : eDMA_0_CH2 error or transfer complete - EDMA_0_CH3_IRQHandler, // 20 : eDMA_0_CH3 error or transfer complete - EDMA_0_CH4_IRQHandler, // 21 : eDMA_0_CH4 error or transfer complete - EDMA_0_CH5_IRQHandler, // 22 : eDMA_0_CH5 error or transfer complete - EDMA_0_CH6_IRQHandler, // 23 : eDMA_0_CH6 error or transfer complete - EDMA_0_CH7_IRQHandler, // 24 : eDMA_0_CH7 error or transfer complete - EDMA_0_CH8_IRQHandler, // 25 : eDMA_0_CH8 error or transfer complete - EDMA_0_CH9_IRQHandler, // 26 : eDMA_0_CH9 error or transfer complete - EDMA_0_CH10_IRQHandler, // 27 : eDMA_0_CH10 error or transfer complete - EDMA_0_CH11_IRQHandler, // 28 : eDMA_0_CH11 error or transfer complete - EDMA_0_CH12_IRQHandler, // 29 : eDMA_0_CH12 error or transfer complete - EDMA_0_CH13_IRQHandler, // 30 : eDMA_0_CH13 error or transfer complete - EDMA_0_CH14_IRQHandler, // 31 : eDMA_0_CH14 error or transfer complete - EDMA_0_CH15_IRQHandler, // 32 : eDMA_0_CH15 error or transfer complete - GPIO00_IRQHandler, // 33 : GPIO0 interrupt 0 - GPIO01_IRQHandler, // 34 : GPIO0 interrupt 1 - GPIO10_IRQHandler, // 35 : GPIO1 interrupt 0 - GPIO11_IRQHandler, // 36 : GPIO1 interrupt 1 - GPIO20_IRQHandler, // 37 : GPIO2 interrupt 0 - GPIO21_IRQHandler, // 38 : GPIO2 interrupt 1 - GPIO30_IRQHandler, // 39 : GPIO3 interrupt 0 - GPIO31_IRQHandler, // 40 : GPIO3 interrupt 1 - GPIO40_IRQHandler, // 41 : GPIO4 interrupt 0 - GPIO41_IRQHandler, // 42 : GPIO4 interrupt 1 - GPIO50_IRQHandler, // 43 : GPIO5 interrupt 0 - GPIO51_IRQHandler, // 44 : GPIO5 interrupt 1 - UTICK0_IRQHandler, // 45 : Micro-Tick Timer interrupt - MRT0_IRQHandler, // 46 : Multi-Rate Timer interrupt - CTIMER0_IRQHandler, // 47 : Standard counter/timer 0 interrupt - CTIMER1_IRQHandler, // 48 : Standard counter/timer 1 interrupt - SCT0_IRQHandler, // 49 : SCTimer/PWM interrupt - CTIMER2_IRQHandler, // 50 : Standard counter/timer 2 interrupt - LP_FLEXCOMM0_IRQHandler, // 51 : LP_FLEXCOMM0 (LPSPI interrupt or LPI2C interrupt or LPUART Receive/Transmit interrupt) - LP_FLEXCOMM1_IRQHandler, // 52 : LP_FLEXCOMM1 (LPSPI interrupt or LPI2C interrupt or LPUART Receive/Transmit interrupt) - LP_FLEXCOMM2_IRQHandler, // 53 : LP_FLEXCOMM2 (LPSPI interrupt or LPI2C interrupt or LPUART Receive/Transmit interrupt) - LP_FLEXCOMM3_IRQHandler, // 54 : LP_FLEXCOMM3 (LPSPI interrupt or LPI2C interrupt or LPUART Receive/Transmit interrupt) - LP_FLEXCOMM4_IRQHandler, // 55 : LP_FLEXCOMM4 (LPSPI interrupt or LPI2C interrupt or LPUART Receive/Transmit interrupt) - LP_FLEXCOMM5_IRQHandler, // 56 : LP_FLEXCOMM5 (LPSPI interrupt or LPI2C interrupt or LPUART Receive/Transmit interrupt) - LP_FLEXCOMM6_IRQHandler, // 57 : LP_FLEXCOMM6 (LPSPI interrupt or LPI2C interrupt or LPUART Receive/Transmit interrupt) - LP_FLEXCOMM7_IRQHandler, // 58 : LP_FLEXCOMM7 (LPSPI interrupt or LPI2C interrupt or LPUART Receive/Transmit interrupt) - LP_FLEXCOMM8_IRQHandler, // 59 : LP_FLEXCOMM8 (LPSPI interrupt or LPI2C interrupt or LPUART Receive/Transmit interrupt) - LP_FLEXCOMM9_IRQHandler, // 60 : LP_FLEXCOMM9 (LPSPI interrupt or LPI2C interrupt or LPUART Receive/Transmit interrupt) - ADC0_IRQHandler, // 61 : Analog-to-Digital Converter 0 - General Purpose interrupt - ADC1_IRQHandler, // 62 : Analog-to-Digital Converter 1 - General Purpose interrupt - PINT0_IRQHandler, // 63 : Pin Interrupt Pattern Match Interrupt - PDM_EVENT_IRQHandler, // 64 : Microphone Interface interrupt - Reserved65_IRQHandler, // 65 : Reserved interrupt - USB0_FS_IRQHandler, // 66 : Universal Serial Bus - Full Speed interrupt - USB0_DCD_IRQHandler, // 67 : Universal Serial Bus - Device Charge Detect interrupt - RTC_IRQHandler, // 68 : RTC Subsystem interrupt (RTC interrupt or Wake timer interrupt) - SMARTDMA_IRQHandler, // 69 : SmartDMA_IRQ - MAILBOX_IRQHandler, // 70 : Inter-CPU Mailbox interrupt0 for CPU0 Inter-CPU Mailbox interrupt1 for CPU1 - CTIMER3_IRQHandler, // 71 : Standard counter/timer 3 interrupt - CTIMER4_IRQHandler, // 72 : Standard counter/timer 4 interrupt - OS_EVENT_IRQHandler, // 73 : OS event timer interrupt - FLEXSPI0_IRQHandler, // 74 : Flexible Serial Peripheral Interface interrupt - SAI0_IRQHandler, // 75 : Serial Audio Interface 0 interrupt - SAI1_IRQHandler, // 76 : Serial Audio Interface 1 interrupt - USDHC0_IRQHandler, // 77 : Ultra Secured Digital Host Controller interrupt - CAN0_IRQHandler, // 78 : Controller Area Network 0 interrupt - CAN1_IRQHandler, // 79 : Controller Area Network 1 interrupt - Reserved80_IRQHandler, // 80 : Reserved interrupt - Reserved81_IRQHandler, // 81 : Reserved interrupt - USB1_HS_PHY_IRQHandler, // 82 : USBHS DCD or USBHS Phy interrupt - USB1_HS_IRQHandler, // 83 : USB High Speed OTG Controller interrupt - SEC_HYPERVISOR_CALL_IRQHandler, // 84 : AHB Secure Controller hypervisor call interrupt - Reserved85_IRQHandler, // 85 : Reserved interrupt - PLU_IRQHandler, // 86 : Programmable Logic Unit interrupt - Freqme_IRQHandler, // 87 : Frequency Measurement interrupt - SEC_VIO_IRQHandler, // 88 : Secure violation interrupt (Memory Block Checker interrupt or secure AHB matrix violation interrupt) - ELS_IRQHandler, // 89 : ELS interrupt - PKC_IRQHandler, // 90 : PKC interrupt - PUF_IRQHandler, // 91 : Physical Unclonable Function interrupt - PQ_IRQHandler, // 92 : Power Quad interrupt - EDMA_1_CH0_IRQHandler, // 93 : eDMA_1_CH0 error or transfer complete - EDMA_1_CH1_IRQHandler, // 94 : eDMA_1_CH1 error or transfer complete - EDMA_1_CH2_IRQHandler, // 95 : eDMA_1_CH2 error or transfer complete - EDMA_1_CH3_IRQHandler, // 96 : eDMA_1_CH3 error or transfer complete - EDMA_1_CH4_IRQHandler, // 97 : eDMA_1_CH4 error or transfer complete - EDMA_1_CH5_IRQHandler, // 98 : eDMA_1_CH5 error or transfer complete - EDMA_1_CH6_IRQHandler, // 99 : eDMA_1_CH6 error or transfer complete - EDMA_1_CH7_IRQHandler, // 100: eDMA_1_CH7 error or transfer complete - EDMA_1_CH8_IRQHandler, // 101: eDMA_1_CH8 error or transfer complete - EDMA_1_CH9_IRQHandler, // 102: eDMA_1_CH9 error or transfer complete - EDMA_1_CH10_IRQHandler, // 103: eDMA_1_CH10 error or transfer complete - EDMA_1_CH11_IRQHandler, // 104: eDMA_1_CH11 error or transfer complete - EDMA_1_CH12_IRQHandler, // 105: eDMA_1_CH12 error or transfer complete - EDMA_1_CH13_IRQHandler, // 106: eDMA_1_CH13 error or transfer complete - EDMA_1_CH14_IRQHandler, // 107: eDMA_1_CH14 error or transfer complete - EDMA_1_CH15_IRQHandler, // 108: eDMA_1_CH15 error or transfer complete - CDOG0_IRQHandler, // 109: Code Watchdog Timer 0 interrupt - CDOG1_IRQHandler, // 110: Code Watchdog Timer 1 interrupt - I3C0_IRQHandler, // 111: Improved Inter Integrated Circuit interrupt 0 - I3C1_IRQHandler, // 112: Improved Inter Integrated Circuit interrupt 1 - NPU_IRQHandler, // 113: NPU interrupt - GDET_IRQHandler, // 114: Digital Glitch Detect 0 interrupt or Digital Glitch Detect 1 interrupt - VBAT0_IRQHandler, // 115: VBAT interrupt( VBAT interrupt or digital tamper interrupt) - EWM0_IRQHandler, // 116: External Watchdog Monitor interrupt - TSI_END_OF_SCAN_IRQHandler, // 117: TSI End of Scan interrupt - TSI_OUT_OF_SCAN_IRQHandler, // 118: TSI Out of Scan interrupt - EMVSIM0_IRQHandler, // 119: EMVSIM0 interrupt - EMVSIM1_IRQHandler, // 120: EMVSIM1 interrupt - FLEXIO_IRQHandler, // 121: Flexible Input/Output interrupt - DAC0_IRQHandler, // 122: Digital-to-Analog Converter 0 - General Purpose interrupt - DAC1_IRQHandler, // 123: Digital-to-Analog Converter 1 - General Purpose interrupt - DAC2_IRQHandler, // 124: 14-bit Digital-to-Analog Converter interrupt - HSCMP0_IRQHandler, // 125: High-Speed comparator0 interrupt - HSCMP1_IRQHandler, // 126: High-Speed comparator1 interrupt - HSCMP2_IRQHandler, // 127: High-Speed comparator2 interrupt + _estack, Reset_Handler, + NMI_Handler, // NMI Handler + HardFault_Handler, // Hard Fault Handler + MemManage_Handler, // MPU Fault Handler + BusFault_Handler, // Bus Fault Handler + UsageFault_Handler, // Usage Fault Handler + SecureFault_Handler, // Secure Fault Handler + 0, // Reserved + 0, // Reserved + 0, // Reserved + SVC_Handler, // SVCall Handler + DebugMon_Handler, // Debug Monitor Handler + 0, // Reserved + PendSV_Handler, // PendSV Handler + SysTick_Handler, // SysTick Handler + // Chip Level - MCXN947_cm33_core0 + OR_IRQHandler, // 16 : OR IRQ + EDMA_0_CH0_IRQHandler, // 17 : eDMA_0_CH0 error or transfer complete + EDMA_0_CH1_IRQHandler, // 18 : eDMA_0_CH1 error or transfer complete + EDMA_0_CH2_IRQHandler, // 19 : eDMA_0_CH2 error or transfer complete + EDMA_0_CH3_IRQHandler, // 20 : eDMA_0_CH3 error or transfer complete + EDMA_0_CH4_IRQHandler, // 21 : eDMA_0_CH4 error or transfer complete + EDMA_0_CH5_IRQHandler, // 22 : eDMA_0_CH5 error or transfer complete + EDMA_0_CH6_IRQHandler, // 23 : eDMA_0_CH6 error or transfer complete + EDMA_0_CH7_IRQHandler, // 24 : eDMA_0_CH7 error or transfer complete + EDMA_0_CH8_IRQHandler, // 25 : eDMA_0_CH8 error or transfer complete + EDMA_0_CH9_IRQHandler, // 26 : eDMA_0_CH9 error or transfer complete + EDMA_0_CH10_IRQHandler, // 27 : eDMA_0_CH10 error or transfer complete + EDMA_0_CH11_IRQHandler, // 28 : eDMA_0_CH11 error or transfer complete + EDMA_0_CH12_IRQHandler, // 29 : eDMA_0_CH12 error or transfer complete + EDMA_0_CH13_IRQHandler, // 30 : eDMA_0_CH13 error or transfer complete + EDMA_0_CH14_IRQHandler, // 31 : eDMA_0_CH14 error or transfer complete + EDMA_0_CH15_IRQHandler, // 32 : eDMA_0_CH15 error or transfer complete + GPIO00_IRQHandler, // 33 : GPIO0 interrupt 0 + GPIO01_IRQHandler, // 34 : GPIO0 interrupt 1 + GPIO10_IRQHandler, // 35 : GPIO1 interrupt 0 + GPIO11_IRQHandler, // 36 : GPIO1 interrupt 1 + GPIO20_IRQHandler, // 37 : GPIO2 interrupt 0 + GPIO21_IRQHandler, // 38 : GPIO2 interrupt 1 + GPIO30_IRQHandler, // 39 : GPIO3 interrupt 0 + GPIO31_IRQHandler, // 40 : GPIO3 interrupt 1 + GPIO40_IRQHandler, // 41 : GPIO4 interrupt 0 + GPIO41_IRQHandler, // 42 : GPIO4 interrupt 1 + GPIO50_IRQHandler, // 43 : GPIO5 interrupt 0 + GPIO51_IRQHandler, // 44 : GPIO5 interrupt 1 + UTICK0_IRQHandler, // 45 : Micro-Tick Timer interrupt + MRT0_IRQHandler, // 46 : Multi-Rate Timer interrupt + CTIMER0_IRQHandler, // 47 : Standard counter/timer 0 interrupt + CTIMER1_IRQHandler, // 48 : Standard counter/timer 1 interrupt + SCT0_IRQHandler, // 49 : SCTimer/PWM interrupt + CTIMER2_IRQHandler, // 50 : Standard counter/timer 2 interrupt + LP_FLEXCOMM0_IRQHandler, // 51 : LP_FLEXCOMM0 (LPSPI interrupt or LPI2C + // interrupt or LPUART Receive/Transmit interrupt) + LP_FLEXCOMM1_IRQHandler, // 52 : LP_FLEXCOMM1 (LPSPI interrupt or LPI2C + // interrupt or LPUART Receive/Transmit interrupt) + LP_FLEXCOMM2_IRQHandler, // 53 : LP_FLEXCOMM2 (LPSPI interrupt or LPI2C + // interrupt or LPUART Receive/Transmit interrupt) + LP_FLEXCOMM3_IRQHandler, // 54 : LP_FLEXCOMM3 (LPSPI interrupt or LPI2C + // interrupt or LPUART Receive/Transmit interrupt) + LP_FLEXCOMM4_IRQHandler, // 55 : LP_FLEXCOMM4 (LPSPI interrupt or LPI2C + // interrupt or LPUART Receive/Transmit interrupt) + LP_FLEXCOMM5_IRQHandler, // 56 : LP_FLEXCOMM5 (LPSPI interrupt or LPI2C + // interrupt or LPUART Receive/Transmit interrupt) + LP_FLEXCOMM6_IRQHandler, // 57 : LP_FLEXCOMM6 (LPSPI interrupt or LPI2C + // interrupt or LPUART Receive/Transmit interrupt) + LP_FLEXCOMM7_IRQHandler, // 58 : LP_FLEXCOMM7 (LPSPI interrupt or LPI2C + // interrupt or LPUART Receive/Transmit interrupt) + LP_FLEXCOMM8_IRQHandler, // 59 : LP_FLEXCOMM8 (LPSPI interrupt or LPI2C + // interrupt or LPUART Receive/Transmit interrupt) + LP_FLEXCOMM9_IRQHandler, // 60 : LP_FLEXCOMM9 (LPSPI interrupt or LPI2C + // interrupt or LPUART Receive/Transmit interrupt) + ADC0_IRQHandler, // 61 : Analog-to-Digital Converter 0 - General Purpose + // interrupt + ADC1_IRQHandler, // 62 : Analog-to-Digital Converter 1 - General Purpose + // interrupt + PINT0_IRQHandler, // 63 : Pin Interrupt Pattern Match Interrupt + PDM_EVENT_IRQHandler, // 64 : Microphone Interface interrupt + Reserved65_IRQHandler, // 65 : Reserved interrupt + USB0_FS_IRQHandler, // 66 : Universal Serial Bus - Full Speed interrupt + USB0_DCD_IRQHandler, // 67 : Universal Serial Bus - Device Charge Detect + // interrupt + RTC_IRQHandler, // 68 : RTC Subsystem interrupt (RTC interrupt or Wake + // timer interrupt) + SMARTDMA_IRQHandler, // 69 : SmartDMA_IRQ + MAILBOX_IRQHandler, // 70 : Inter-CPU Mailbox interrupt0 for CPU0 Inter-CPU + // Mailbox interrupt1 for CPU1 + CTIMER3_IRQHandler, // 71 : Standard counter/timer 3 interrupt + CTIMER4_IRQHandler, // 72 : Standard counter/timer 4 interrupt + OS_EVENT_IRQHandler, // 73 : OS event timer interrupt + FLEXSPI0_IRQHandler, // 74 : Flexible Serial Peripheral Interface interrupt + SAI0_IRQHandler, // 75 : Serial Audio Interface 0 interrupt + SAI1_IRQHandler, // 76 : Serial Audio Interface 1 interrupt + USDHC0_IRQHandler, // 77 : Ultra Secured Digital Host Controller interrupt + CAN0_IRQHandler, // 78 : Controller Area Network 0 interrupt + CAN1_IRQHandler, // 79 : Controller Area Network 1 interrupt + Reserved80_IRQHandler, // 80 : Reserved interrupt + Reserved81_IRQHandler, // 81 : Reserved interrupt + USB1_HS_PHY_IRQHandler, // 82 : USBHS DCD or USBHS Phy interrupt + USB1_HS_IRQHandler, // 83 : USB High Speed OTG Controller interrupt + SEC_HYPERVISOR_CALL_IRQHandler, // 84 : AHB Secure Controller hypervisor + // call interrupt + Reserved85_IRQHandler, // 85 : Reserved interrupt + PLU_IRQHandler, // 86 : Programmable Logic Unit interrupt + Freqme_IRQHandler, // 87 : Frequency Measurement interrupt + SEC_VIO_IRQHandler, // 88 : Secure violation interrupt (Memory Block + // Checker interrupt or secure AHB matrix violation + // interrupt) + ELS_IRQHandler, // 89 : ELS interrupt + PKC_IRQHandler, // 90 : PKC interrupt + PUF_IRQHandler, // 91 : Physical Unclonable Function interrupt + PQ_IRQHandler, // 92 : Power Quad interrupt + EDMA_1_CH0_IRQHandler, // 93 : eDMA_1_CH0 error or transfer complete + EDMA_1_CH1_IRQHandler, // 94 : eDMA_1_CH1 error or transfer complete + EDMA_1_CH2_IRQHandler, // 95 : eDMA_1_CH2 error or transfer complete + EDMA_1_CH3_IRQHandler, // 96 : eDMA_1_CH3 error or transfer complete + EDMA_1_CH4_IRQHandler, // 97 : eDMA_1_CH4 error or transfer complete + EDMA_1_CH5_IRQHandler, // 98 : eDMA_1_CH5 error or transfer complete + EDMA_1_CH6_IRQHandler, // 99 : eDMA_1_CH6 error or transfer complete + EDMA_1_CH7_IRQHandler, // 100: eDMA_1_CH7 error or transfer complete + EDMA_1_CH8_IRQHandler, // 101: eDMA_1_CH8 error or transfer complete + EDMA_1_CH9_IRQHandler, // 102: eDMA_1_CH9 error or transfer complete + EDMA_1_CH10_IRQHandler, // 103: eDMA_1_CH10 error or transfer complete + EDMA_1_CH11_IRQHandler, // 104: eDMA_1_CH11 error or transfer complete + EDMA_1_CH12_IRQHandler, // 105: eDMA_1_CH12 error or transfer complete + EDMA_1_CH13_IRQHandler, // 106: eDMA_1_CH13 error or transfer complete + EDMA_1_CH14_IRQHandler, // 107: eDMA_1_CH14 error or transfer complete + EDMA_1_CH15_IRQHandler, // 108: eDMA_1_CH15 error or transfer complete + CDOG0_IRQHandler, // 109: Code Watchdog Timer 0 interrupt + CDOG1_IRQHandler, // 110: Code Watchdog Timer 1 interrupt + I3C0_IRQHandler, // 111: Improved Inter Integrated Circuit interrupt 0 + I3C1_IRQHandler, // 112: Improved Inter Integrated Circuit interrupt 1 + NPU_IRQHandler, // 113: NPU interrupt + GDET_IRQHandler, // 114: Digital Glitch Detect 0 interrupt or Digital + // Glitch Detect 1 interrupt + VBAT0_IRQHandler, // 115: VBAT interrupt( VBAT interrupt or digital tamper + // interrupt) + EWM0_IRQHandler, // 116: External Watchdog Monitor interrupt + TSI_END_OF_SCAN_IRQHandler, // 117: TSI End of Scan interrupt + TSI_OUT_OF_SCAN_IRQHandler, // 118: TSI Out of Scan interrupt + EMVSIM0_IRQHandler, // 119: EMVSIM0 interrupt + EMVSIM1_IRQHandler, // 120: EMVSIM1 interrupt + FLEXIO_IRQHandler, // 121: Flexible Input/Output interrupt + DAC0_IRQHandler, // 122: Digital-to-Analog Converter 0 - General Purpose + // interrupt + DAC1_IRQHandler, // 123: Digital-to-Analog Converter 1 - General Purpose + // interrupt + DAC2_IRQHandler, // 124: 14-bit Digital-to-Analog Converter interrupt + HSCMP0_IRQHandler, // 125: High-Speed comparator0 interrupt + HSCMP1_IRQHandler, // 126: High-Speed comparator1 interrupt + HSCMP2_IRQHandler, // 127: High-Speed comparator2 interrupt FLEXPWM0_RELOAD_ERROR_IRQHandler, // 128: FlexPWM0_reload_error interrupt FLEXPWM0_FAULT_IRQHandler, // 129: FlexPWM0_fault interrupt - FLEXPWM0_SUBMODULE0_IRQHandler, // 130: FlexPWM0 Submodule 0 capture/compare/reload interrupt - FLEXPWM0_SUBMODULE1_IRQHandler, // 131: FlexPWM0 Submodule 1 capture/compare/reload interrupt - FLEXPWM0_SUBMODULE2_IRQHandler, // 132: FlexPWM0 Submodule 2 capture/compare/reload interrupt - FLEXPWM0_SUBMODULE3_IRQHandler, // 133: FlexPWM0 Submodule 3 capture/compare/reload interrupt + FLEXPWM0_SUBMODULE0_IRQHandler, // 130: FlexPWM0 Submodule 0 + // capture/compare/reload interrupt + FLEXPWM0_SUBMODULE1_IRQHandler, // 131: FlexPWM0 Submodule 1 + // capture/compare/reload interrupt + FLEXPWM0_SUBMODULE2_IRQHandler, // 132: FlexPWM0 Submodule 2 + // capture/compare/reload interrupt + FLEXPWM0_SUBMODULE3_IRQHandler, // 133: FlexPWM0 Submodule 3 + // capture/compare/reload interrupt FLEXPWM1_RELOAD_ERROR_IRQHandler, // 134: FlexPWM1_reload_error interrupt FLEXPWM1_FAULT_IRQHandler, // 135: FlexPWM1_fault interrupt - FLEXPWM1_SUBMODULE0_IRQHandler, // 136: FlexPWM1 Submodule 0 capture/compare/reload interrupt - FLEXPWM1_SUBMODULE1_IRQHandler, // 137: FlexPWM1 Submodule 1 capture/compare/reload interrupt - FLEXPWM1_SUBMODULE2_IRQHandler, // 138: FlexPWM1 Submodule 2 capture/compare/reload interrupt - FLEXPWM1_SUBMODULE3_IRQHandler, // 139: FlexPWM1 Submodule 3 capture/compare/reload interrupt + FLEXPWM1_SUBMODULE0_IRQHandler, // 136: FlexPWM1 Submodule 0 + // capture/compare/reload interrupt + FLEXPWM1_SUBMODULE1_IRQHandler, // 137: FlexPWM1 Submodule 1 + // capture/compare/reload interrupt + FLEXPWM1_SUBMODULE2_IRQHandler, // 138: FlexPWM1 Submodule 2 + // capture/compare/reload interrupt + FLEXPWM1_SUBMODULE3_IRQHandler, // 139: FlexPWM1 Submodule 3 + // capture/compare/reload interrupt ENC0_COMPARE_IRQHandler, // 140: ENC0_Compare interrupt ENC0_HOME_IRQHandler, // 141: ENC0_Home interrupt ENC0_WDG_SAB_IRQHandler, // 142: ENC0_WDG_IRQ/SAB interrupt @@ -326,41 +355,51 @@ __attribute__((section(".vectors"))) void (*const tab[16 + 156])(void) = { ENC1_HOME_IRQHandler, // 145: ENC1_Home interrupt ENC1_WDG_SAB_IRQHandler, // 146: ENC1_WDG_IRQ/SAB interrupt ENC1_IDX_IRQHandler, // 147: ENC1_IDX interrupt - ITRC0_IRQHandler, // 148: Intrusion and Tamper Response Controller interrupt - BSP32_IRQHandler, // 149: CoolFlux BSP32 interrupt - ELS_ERR_IRQHandler, // 150: ELS error interrupt - PKC_ERR_IRQHandler, // 151: PKC error interrupt - ERM_SINGLE_BIT_ERROR_IRQHandler, // 152: ERM Single Bit error interrupt - ERM_MULTI_BIT_ERROR_IRQHandler, // 153: ERM Multi Bit error interrupt - FMU0_IRQHandler, // 154: Flash Management Unit interrupt - ETHERNET_IRQHandler, // 155: Ethernet QoS interrupt - ETHERNET_PMT_IRQHandler, // 156: Ethernet QoS power management interrupt - ETHERNET_MACLP_IRQHandler, // 157: Ethernet QoS MAC interrupt - SINC_FILTER_IRQHandler, // 158: SINC Filter interrupt - LPTMR0_IRQHandler, // 159: Low Power Timer 0 interrupt - LPTMR1_IRQHandler, // 160: Low Power Timer 1 interrupt - SCG_IRQHandler, // 161: System Clock Generator interrupt - SPC_IRQHandler, // 162: System Power Controller interrupt - WUU_IRQHandler, // 163: Wake Up Unit interrupt - PORT_EFT_IRQHandler, // 164: PORT0~5 EFT interrupt - ETB0_IRQHandler, // 165: ETB counter expires interrupt - SM3_IRQHandler, // 166: Secure Generic Interface (SGI) SAFO interrupt - TRNG0_IRQHandler, // 167: True Random Number Generator interrupt - WWDT0_IRQHandler, // 168: Windowed Watchdog Timer 0 interrupt - WWDT1_IRQHandler, // 169: Windowed Watchdog Timer 1 interrupt - CMC0_IRQHandler, // 170: Core Mode Controller interrupt - CTI0_IRQHandler, // 171: Cross Trigger Interface interrupt + ITRC0_IRQHandler, // 148: Intrusion and Tamper Response Controller + // interrupt + BSP32_IRQHandler, // 149: CoolFlux BSP32 interrupt + ELS_ERR_IRQHandler, // 150: ELS error interrupt + PKC_ERR_IRQHandler, // 151: PKC error interrupt + ERM_SINGLE_BIT_ERROR_IRQHandler, // 152: ERM Single Bit error interrupt + ERM_MULTI_BIT_ERROR_IRQHandler, // 153: ERM Multi Bit error interrupt + FMU0_IRQHandler, // 154: Flash Management Unit interrupt + ETHERNET_IRQHandler, // 155: Ethernet QoS interrupt + ETHERNET_PMT_IRQHandler, // 156: Ethernet QoS power management interrupt + ETHERNET_MACLP_IRQHandler, // 157: Ethernet QoS MAC interrupt + SINC_FILTER_IRQHandler, // 158: SINC Filter interrupt + LPTMR0_IRQHandler, // 159: Low Power Timer 0 interrupt + LPTMR1_IRQHandler, // 160: Low Power Timer 1 interrupt + SCG_IRQHandler, // 161: System Clock Generator interrupt + SPC_IRQHandler, // 162: System Power Controller interrupt + WUU_IRQHandler, // 163: Wake Up Unit interrupt + PORT_EFT_IRQHandler, // 164: PORT0~5 EFT interrupt + ETB0_IRQHandler, // 165: ETB counter expires interrupt + SM3_IRQHandler, // 166: Secure Generic Interface (SGI) SAFO interrupt + TRNG0_IRQHandler, // 167: True Random Number Generator interrupt + WWDT0_IRQHandler, // 168: Windowed Watchdog Timer 0 interrupt + WWDT1_IRQHandler, // 169: Windowed Watchdog Timer 1 interrupt + CMC0_IRQHandler, // 170: Core Mode Controller interrupt + CTI0_IRQHandler, // 171: Cross Trigger Interface interrupt }; +extern unsigned char _end[]; // End of data section, start of heap. See link.ld __attribute__((naked, noreturn)) void Reset_Handler(void) { + __asm("cpsid i"); // Disable interrupts + // set SPLIM to somewhere, trick the linker + __asm volatile("MSR MSPLIM, %1 \n" + : + : "r"(tab), "r"(_end) + : "r0", "r1"); + SYSCON->ECC_ENABLE_CTRL = 0; // disable RAM ECC, must do for this link.ld // Clear BSS section, and copy data section from flash to RAM extern long _sbss, _ebss, _sdata, _edata, _sidata; - for (long *src = &_sbss; src < &_ebss; src++) *src = 0; - for (long *src = &_sdata, *dst = &_sidata; src < &_edata;) *src++ = *dst++; + for (long *dst = &_sbss; dst < &_ebss; dst++) *dst = 0; + for (long *dst = &_sdata, *src = &_sidata; dst < &_edata;) *dst++ = *src++; - SCB->VTOR = (uint32_t) &tab; SystemInit(); + __asm("cpsie i"); // Reenable interrupts + // Call main() extern void main(void); main(); @@ -369,4 +408,4 @@ __attribute__((naked, noreturn)) void Reset_Handler(void) { void Default_Handler(void) { for (;;) (void) 0; -} \ No newline at end of file +} diff --git a/examples/stm32/nucleo-f429zi-make-baremetal-builtin/hal.h b/examples/stm32/nucleo-f429zi-make-baremetal-builtin/hal.h index 58e24069cc..cffabf4db3 100644 --- a/examples/stm32/nucleo-f429zi-make-baremetal-builtin/hal.h +++ b/examples/stm32/nucleo-f429zi-make-baremetal-builtin/hal.h @@ -137,6 +137,7 @@ static inline uint32_t rng_read(void) { return RNG->DR; } +// Hw pull-ups on PHY RXD0,1,DV to enable autonegotiation static inline void ethernet_init(void) { // Initialise Ethernet. Enable MAC GPIO pins, see // https://www.farnell.com/datasheets/2014265.pdf section 6.10 diff --git a/examples/stm32/nucleo-f429zi-make-freertos-builtin/hal.h b/examples/stm32/nucleo-f429zi-make-freertos-builtin/hal.h index 58e24069cc..cffabf4db3 100644 --- a/examples/stm32/nucleo-f429zi-make-freertos-builtin/hal.h +++ b/examples/stm32/nucleo-f429zi-make-freertos-builtin/hal.h @@ -137,6 +137,7 @@ static inline uint32_t rng_read(void) { return RNG->DR; } +// Hw pull-ups on PHY RXD0,1,DV to enable autonegotiation static inline void ethernet_init(void) { // Initialise Ethernet. Enable MAC GPIO pins, see // https://www.farnell.com/datasheets/2014265.pdf section 6.10 diff --git a/examples/stm32/nucleo-f746zg-make-baremetal-builtin-cmsis_driver/hal.h b/examples/stm32/nucleo-f746zg-make-baremetal-builtin-cmsis_driver/hal.h index 57605a0984..bbd67cdea2 100644 --- a/examples/stm32/nucleo-f746zg-make-baremetal-builtin-cmsis_driver/hal.h +++ b/examples/stm32/nucleo-f746zg-make-baremetal-builtin-cmsis_driver/hal.h @@ -138,6 +138,7 @@ static inline uint32_t rng_read(void) { return RNG->DR; } +// Hw pull-ups on PHY RXD0,1,DV to enable autonegotiation static inline void ethernet_init(void) { // Initialise Ethernet. Enable MAC GPIO pins, see // https://www.farnell.com/datasheets/2014265.pdf section 6.10 diff --git a/examples/stm32/nucleo-f746zg-make-baremetal-builtin/hal.h b/examples/stm32/nucleo-f746zg-make-baremetal-builtin/hal.h index 57605a0984..bbd67cdea2 100644 --- a/examples/stm32/nucleo-f746zg-make-baremetal-builtin/hal.h +++ b/examples/stm32/nucleo-f746zg-make-baremetal-builtin/hal.h @@ -138,6 +138,7 @@ static inline uint32_t rng_read(void) { return RNG->DR; } +// Hw pull-ups on PHY RXD0,1,DV to enable autonegotiation static inline void ethernet_init(void) { // Initialise Ethernet. Enable MAC GPIO pins, see // https://www.farnell.com/datasheets/2014265.pdf section 6.10 diff --git a/examples/stm32/nucleo-f746zg-make-freertos-builtin/hal.h b/examples/stm32/nucleo-f746zg-make-freertos-builtin/hal.h index 57605a0984..bbd67cdea2 100644 --- a/examples/stm32/nucleo-f746zg-make-freertos-builtin/hal.h +++ b/examples/stm32/nucleo-f746zg-make-freertos-builtin/hal.h @@ -138,6 +138,7 @@ static inline uint32_t rng_read(void) { return RNG->DR; } +// Hw pull-ups on PHY RXD0,1,DV to enable autonegotiation static inline void ethernet_init(void) { // Initialise Ethernet. Enable MAC GPIO pins, see // https://www.farnell.com/datasheets/2014265.pdf section 6.10 diff --git a/examples/stm32/nucleo-h563zi-make-baremetal-builtin/hal.h b/examples/stm32/nucleo-h563zi-make-baremetal-builtin/hal.h index ccfe640fc6..d5e0d1a101 100644 --- a/examples/stm32/nucleo-h563zi-make-baremetal-builtin/hal.h +++ b/examples/stm32/nucleo-h563zi-make-baremetal-builtin/hal.h @@ -149,6 +149,7 @@ static inline bool ldo_is_on(void) { return (PWR->SCCR & PWR_SCCR_LDOEN) == PWR_SCCR_LDOEN; } +// Hw pull-ups on PHY RXD0,1,DV to enable autonegotiation static inline void ethernet_init(void) { // Initialise Ethernet. Enable MAC GPIO pins, see UM3115 section 10.7 uint16_t pins[] = {PIN('A', 1), PIN('A', 2), PIN('A', 7), diff --git a/examples/stm32/nucleo-h563zi-make-freertos-builtin/hal.h b/examples/stm32/nucleo-h563zi-make-freertos-builtin/hal.h index 138b42a820..cc0ccaa8ae 100644 --- a/examples/stm32/nucleo-h563zi-make-freertos-builtin/hal.h +++ b/examples/stm32/nucleo-h563zi-make-freertos-builtin/hal.h @@ -149,6 +149,7 @@ static inline bool ldo_is_on(void) { return (PWR->SCCR & PWR_SCCR_LDOEN) == PWR_SCCR_LDOEN; } +// Hw pull-ups on PHY RXD0,1,DV to enable autonegotiation static inline void ethernet_init(void) { // Initialise Ethernet. Enable MAC GPIO pins, see UM3115 section 10.7 uint16_t pins[] = {PIN('A', 1), PIN('A', 2), PIN('A', 7), diff --git a/examples/stm32/nucleo-h723zg-make-baremetal-builtin/hal.h b/examples/stm32/nucleo-h723zg-make-baremetal-builtin/hal.h index 75c19b72ce..c32595060a 100644 --- a/examples/stm32/nucleo-h723zg-make-baremetal-builtin/hal.h +++ b/examples/stm32/nucleo-h723zg-make-baremetal-builtin/hal.h @@ -161,6 +161,7 @@ static inline uint32_t rng_read(void) { return RNG->DR; } +// Hw pull-ups on PHY RXD0,1,DV to enable autonegotiation static inline void ethernet_init(void) { // Initialise Ethernet. Enable MAC GPIO pins, see // https://www.st.com/resource/en/user_manual/um2407-stm32h7-nucleo144-boards-mb1364-stmicroelectronics.pdf diff --git a/examples/stm32/nucleo-h723zg-make-freertos-builtin/hal.h b/examples/stm32/nucleo-h723zg-make-freertos-builtin/hal.h index 2ecc44512b..4be32e79b3 100644 --- a/examples/stm32/nucleo-h723zg-make-freertos-builtin/hal.h +++ b/examples/stm32/nucleo-h723zg-make-freertos-builtin/hal.h @@ -161,6 +161,7 @@ static inline uint32_t rng_read(void) { return RNG->DR; } +// Hw pull-ups on PHY RXD0,1,DV to enable autonegotiation static inline void ethernet_init(void) { // Initialise Ethernet. Enable MAC GPIO pins, see // https://www.st.com/resource/en/user_manual/um2407-stm32h7-nucleo144-boards-mb1364-stmicroelectronics.pdf diff --git a/examples/stm32/nucleo-h743zi-make-baremetal-builtin/hal.h b/examples/stm32/nucleo-h743zi-make-baremetal-builtin/hal.h index 368c1ce5e3..c0fa292028 100644 --- a/examples/stm32/nucleo-h743zi-make-baremetal-builtin/hal.h +++ b/examples/stm32/nucleo-h743zi-make-baremetal-builtin/hal.h @@ -208,6 +208,7 @@ static inline void clock_init(void) { FLASH->ACR = FLASH_LATENCY; // default is larger } +// Hw pull-ups on PHY RXD0,1,DV to enable autonegotiation static inline void ethernet_init(void) { // Initialise Ethernet. Enable MAC GPIO pins, see // https://www.st.com/resource/en/user_manual/um2407-stm32h7-nucleo144-boards-mb1364-stmicroelectronics.pdf diff --git a/examples/stm32/nucleo-h743zi-make-freertos-builtin/hal.h b/examples/stm32/nucleo-h743zi-make-freertos-builtin/hal.h index 69c80b04a4..bfd2bfa3f5 100644 --- a/examples/stm32/nucleo-h743zi-make-freertos-builtin/hal.h +++ b/examples/stm32/nucleo-h743zi-make-freertos-builtin/hal.h @@ -159,6 +159,7 @@ static inline char chiprev(void) { return '?'; } +// Hw pull-ups on PHY RXD0,1,DV to enable autonegotiation static inline void ethernet_init(void) { // Initialise Ethernet. Enable MAC GPIO pins, see // https://www.st.com/resource/en/user_manual/um2407-stm32h7-nucleo144-boards-mb1364-stmicroelectronics.pdf diff --git a/examples/stm32/stm32h573i-dk-make-baremetal-builtin/hal.h b/examples/stm32/stm32h573i-dk-make-baremetal-builtin/hal.h index e39a717b43..8e5c2bcb5e 100644 --- a/examples/stm32/stm32h573i-dk-make-baremetal-builtin/hal.h +++ b/examples/stm32/stm32h573i-dk-make-baremetal-builtin/hal.h @@ -149,6 +149,7 @@ static inline bool ldo_is_on(void) { return (PWR->SCCR & PWR_SCCR_LDOEN) == PWR_SCCR_LDOEN; } +// Hw pull-ups on PHY RXD0,1,DV to enable autonegotiation static inline void ethernet_init(void) { // Initialise Ethernet. Enable MAC GPIO pins, see UM3115 section 10.7 uint16_t pins[] = {PIN('A', 1), PIN('A', 2), PIN('A', 7), diff --git a/examples/stm32/stm32h573i-dk-make-freertos-builtin/hal.h b/examples/stm32/stm32h573i-dk-make-freertos-builtin/hal.h index 386b84ddc0..5a4f3df56a 100644 --- a/examples/stm32/stm32h573i-dk-make-freertos-builtin/hal.h +++ b/examples/stm32/stm32h573i-dk-make-freertos-builtin/hal.h @@ -149,6 +149,7 @@ static inline bool ldo_is_on(void) { return (PWR->SCCR & PWR_SCCR_LDOEN) == PWR_SCCR_LDOEN; } +// Hw pull-ups on PHY RXD0,1,DV to enable autonegotiation static inline void ethernet_init(void) { // Initialise Ethernet. Enable MAC GPIO pins, see UM3115 section 10.7 uint16_t pins[] = {PIN('A', 1), PIN('A', 2), PIN('A', 7), diff --git a/examples/stm32/stm32h747i-disco-make-baremetal-builtin/hal.h b/examples/stm32/stm32h747i-disco-make-baremetal-builtin/hal.h index bc70fdbcbc..1dbbdfa1ad 100644 --- a/examples/stm32/stm32h747i-disco-make-baremetal-builtin/hal.h +++ b/examples/stm32/stm32h747i-disco-make-baremetal-builtin/hal.h @@ -161,6 +161,7 @@ static inline char chiprev(void) { return '?'; } +// Hw pull-ups on PHY RXD0,1,DV to enable autonegotiation static inline void ethernet_init(void) { // Initialise Ethernet. Enable MAC GPIO pins, see UM2411 uint16_t pins[] = {PIN('A', 1), PIN('A', 2), PIN('A', 7),