The RoundHouseBMG is a direct drive extruder designed for the Voron v0.1
It uses the mounts from the Mini-AfterSherpa and was designed to complement the 5015 Toolhead toolhead. It can be used on any toolhead that uses the Mini-AfterSherpa design.
Please Note: This is a Work In Progress and things will likely change as issues are fixed and enhancements are made.
- Use the Voron defaults and print in ABS or better
- The parts are orientated correctly in the STLs
- 4x M3x6 or 8mm SHCS/BHCS (for securing the front to the back of the extruder)
- 1x M3x25mm SHCS/BHCS (for the lever pivot)
- 5x Brass heat inserts (4 for the mount, 1 for the lever)
- 1x BMG Extruder Kit
- 1x NEMA14 36mm pancake Motor with 10 tooth gear
- 1x ECAS04 Embedded Collet (optional)
- BMG Extruder Kit, e.g. AliExpress or direct from Bondtech
- NEMA14 36mm pancake Motor with 10 tooth gear, e.g. AliExpress
- ECAS04 Embedded Collet, e.g. Aliexpress
Instructions to follow...
