iOS Health Database Interface

A Swift interface to access health records of healthdb_secure.sqlite files which have been recovered from iOS backups.

This library is a reverse-engineering effort to reconstruct Health data from the SQLite database contained in an iOS Backup. This library may can be useful when the original health data is lost and has to be recovered, or when a sample database is needed for testing. And in general, it can be quite interesting to see the amount of data stored in Health.

Working features

The framework allows access to a large part of the health records, but not all data types are fully supported. New features may be added in the future, but there is also a chance that future updates may change the database layout and break a few things.

The following feature list refers to databases recovered with iOS 16 and iOS 17.

Feature	Status	Comment
Category samples	✅	59/65 types supported
Quantity samples	✅	109/112 types supported
Quantity series	✅	109/112 types supported
Workouts	✅
Workout activities	✅
Workout events	✅
Workout statistics	✅	Average + min/max
Workout goals	✅	Duration, Distance, Calories
Workout zones	✅
User characteristics	✅	Except HKActivityMoveMode
Correlations	✅
ECG Samples	✅	Including voltages
Scored Assessments	✅	Since iOS 17
Sleep schedules	✅
HeartbeatSeries	✅
Audiogram samples	✅
Medical records and prescriptions	❌
Achievements	❌

Caveats

Unfortunately, Apple makes it very difficult to work with Health Data outside the provided framework. Most problematically, a lot of HealthKit types don't expose properties publicly that would be needed/useful. For example, it's not possible to construct a full HKWorkout outside of the provided HKHealthStore (which is why this library uses it's own Workout type).

Secondly, the layout of internal data structures for the SQLite database are not publicly documented, so working with the database is based on guesswork and experiments. To understand all data formats, it's necessary to observe how data is stored in the individual tables, but some of the data can't be inserted through the publicly available API. For example, EnvironmentalAudioExposureEvents can only be logged by an Apple Watch. Since sample types internally use integer IDs, it's difficult to figure out all assignments. This framework can therefore not handle all sample types properly.

Another (minor) problem are the database columns with encoded binary data, where again, no information about the structure is available. There is currently some information not accessible and understood by this library.

Opening a database

Extract the healthdb_secure.sqlite file from a device. This is most easily done by creating a local (encrypted!) device backup, and the browsing the data with a tool like iMazing. The file should be placed in a location with read/write access.

import HKDatabase

let db = try HKDatabaseStore(fileUrl: ...)

The HKDatabaseStore is the basic object to interact with the health data, similar to the HKHealthStore.

This library relies heavily on the HealthKitExtensions to simplify interacting with health data, and provides a more convenient database wrapper:

let db = try HKDatabaseStoreWrapper(fileUrl: ...)

This class wraps a HKDatabaseStore and provides functions to more easily query the database. The following readme is mostly based on this class.

Basic user characteristics and values

Similar to the HKHealthStore, these can be accessed through separate functions on HKDatabaseStoreWrapper:

let sex = try db.biologicalSex()
let bloodType = try db.bloodType()
let dateOfBirth = try db.dateOfBirthComponents()
let skinType = try db.fitzpatrickSkinType()
let wheelchair = try db.wheelchairUse()

Access all values in the table through:

let data: [KeyValueEntry] = try db.keyValuePairs()

Internally, they are stored in the key_value_secure table.

Samples

Samples are separated into different types, similar to the HealthKit types HKCategorySample, HKQuantitySample, HKCorrelationSample, etc.

Note All samples returned from the database have their original UUID set as a metadata property using the HKMetadataKeyExternalUUID. Original metadata with the same key is discarded.

In the database, the initial entry point is always the samples table. It contains the date interval and the data type. This type then determines where the additional data is stored.

The known sample types are managed in the SampleType enum, as well as extensions on HKQuantityTypeIdentifier, HKCorrelationTypeIdentifier, and HKCategoryTypeIdentifier.

Category samples

Access category samples through:

let samples: [Vomiting] = try db.samples(from: .distantPast, to: .now)

The functions will fail with a HKNotSupportedError if the internal SampleType identifier is not known.

The following category types are yet unsupported:

HighHeartRateEvent, IrregularHeartRhythmEvent, LowCardioFitnessEvent, AppleWalkingSteadinessEvent, InfrequentMenstrualCycles, HeadphoneAudioExposureEvent.

You can get a list of all unknown data types using:

let rawTypes = try db.store.unknownRawSampleTypes()

To access unknown samples if you know the corresponding HealthKit type:

let samples = try db.store.samples(
    rawCategory: 147, 
    as: .lowHeartRateEvent, 
    from: .distantPast, 
    to: .now)

This function will produce errors if the sample data contains invalid values, which may happen when the SampleType doesn't match the HKCategoryTypeIdentifier.

It's also possible to get the raw categories from the samples:

let samples = try db.store.categories(rawType: 147)

Note If you figure out the identifier for a currently unknown type, please open an issue, and it will be included.

Internally, the additional data of the samples is stored in the category_samples table where samples.data_id == category_samples.data_id

Quantity samples

let samples: [BodyMass] = try db.samples(from: .distantPast, to: .now)

The functions will fail with a HKNotSupportedError if the internal SampleType identifier is not known. The value in the database is interpreted according to the default unit of each sample type.

Note The database may contain quantity samples without an associated value (no entry in quantity_samples). These appear to be left over from past database migrations, since the samples are usually found as part of a quantity series. These samples are therefore skipped.

The following types are currently unsupported: AppleSleepingWristTemperature, AppleMoveTime, NikeFuel

To access unknown samples:

let samples = try db.samples(
        rawQuantity: 3, 
        as: .bodyMass, 
        unit: .gramUnit(with: .kilo), 
        from: .distantPast, 
        to: .now)

Similar to category samples, it's also possible to get the raw values:

let samples = try db.quantities(rawType: 3)

Internally, the additional data of the samples is stored in the quantity_samples table where samples.data_id == quantity_samples.data_id. The database also stores an "original unit" for some samples, but this data is not exported. The unit is contained in the unit_string column of the unit_strings table where quantity_samples.original_unit == unit_strings.ROWID.

Correlation samples

let samples: [BloodPressure] = try db.correlations(from: .distantPast, to: .now)

The samples associated with a correlation (like blood pressure values) are also stored in the samples table. They are connected with another sample (data_type == 80 for blood pressure) through the associations table, which contains one entry per associated sample, where sample.data_id == associations.parent_id for the main sample, and sample.data_id == associations.child_id for the associated samples.

Private samples

There are a few sample types that are normally not available through HealthKit, but still contained in the database. These samples can be accessed by directly querying a sample type:

let samples = try db.store.categories(.appleWatchIsCharging)
let samples = try db.store.quantities(.exerciseMinutesGoal)

There are only a few of those private sample types currently known:

• .appleWatchIsCharging: Indicates when an Apple Watch is charging (1) or not (0).
• .exerciseMinutesGoal: A quantity sample for each time the exercise goal is changed (value = new goal)
• .standHourGoal: A quantity sample for each time the stand goal is changed (value = new goal)
• .raw68: Unknown category sample
• .raw112: Unknown category sample
• .raw197: Unknown quantity sample

Scored assessments

Additionally, Health features (as of iOS 17?) questionaires about anxiety and depression, which can also be accessed:

let samples: [DepressionRiskQuestionaire] = try db.questionaires()
let answer = questionaire.answer(to: .suicideThoughts)

Unhandled samples

There are many sample tables in the database, and all appear to be linked by their data_id column to the data_id column in the samples table.

Name	Supported
account_owner_samples	❌
allergy_record_samples	❌
binary_samples	✅ (Heartbeat series, audiograms)
category_samples	✅
clinical_note_record_samples	❌
clinical_record_samples	❌
condition_record_samples	❌
coverage_record_samples	❌
diagnostic_test_report_samples	❌
diagnostic_test_result_samples	❌
ecg_samples	✅
medication_dispense_record_samples	❌
medication_dose_event_samples	❌
medication_order_samples	❌
medication_record_samples	❌
procedure_record_samples	❌
quantity_samples	✅
scored_assessment_samples	✅
signed_clinical_data_record_samples	❌
sleep_schedule_samples	✅
state_of_mind_samples	❌
unknown_record_samples	❌
vaccination_record_samples	❌
verifiable_clinical_record_samples	❌
workout_zones_samples	❌

Quantity sample series

Some quantity samples are arranged in data series, which are associated with a specific sample. This concerns mostly workout data, like heart rate, cycling power, or vertical oscillation data.

let heartRateSeries = try db.series(
    ofQuantity: HeartRate.self, 
    from: .distantPast, 
    to: .now)
let series = heartRateSeries.first!
let samples: [HeartRate] = try db.quantities(in: series)

Note The samples of the series have no device or metadata associated with it. Check the sample property of the data series to get those values.

There are also functions on HKDatabaseStore to get simple HKQuantitySamples, and the possibility to manually select the raw sample type for unsupported quantity types.

If you don't care about the series and just want all samples of a specific type, you can request the samples directly:

let samples: [HeartRate] = try db.samples(
    includingSeriesData: true, 
    from: start, 
    to: end)

Note: If you select samples directly, then the device and metadata properties of the HKQuantitySamples will be set to the value of the data series sample.

Each data series contains an entry in samples, with the data_type according to the sample type. An entry in the quantity_sample_series with the same data_id as the sample contains the series specification, including the number of samples.

The actual values of the data series are contained in quantity_series_data, where quantity_sample_series.hfd_key == quantity_series_data.series_identifier. The value is scaled in the default unit of the sample type.

It's not obvious from the entry in samples, if a data series is linked to it.

For each data series, there is also an entry in quantity_sample_statistics where the owner_id == samples.data_id.

Heartbeat Series

Samples about Heart Rate Variability are usually associated with a heartbeat series, which contains beat-by-beat measurements over a longer timespan. These series can be queried by using:

let series: [HeartbeatSeries] = try db.heartbeatSeries(from: start, to: end)

Each series consists of the usual sample information (start and end date, UUID, device, ...) as well as an array of heart beat samples, which consist of a time interval indicating the offset to the start of the measurement, as well an indicator to show whether there may have been missed heartbeats before this one. This structure is similar to HKHeartbeatSeriesQuery.

The heartbeat data is stored in the binary_samples table, linked to an entry in the samples table through the associations table, where samples.data_id == associations.child_id and associations.parent_id == binary_samples.data_id.

The data in the payload column is organized in 16-byte chunks, where the first 8 bytes are a double indicating the timeSinceSeriesStart property. The 9th byte seems to indicate the isPrecededByGap property. The meaning of the last seven bytes is currently unknown. Most of these values are zeroes, but occasionally there are values like 0xa770270, 0x57ef26, 0xd7ab25, 0xd65b15, or 0x573e26. These values have no apparent meaning, and can occur with both true or false for isPrecededByGap.

Audiograms

Stored HKAudiogramSamples can also be queried.

let samples: [HKAudiogramSample] = try db.audiograms(from: start, to: end)

Like heartbeat series data, the binary data associated with each sample is stored in binary_samples. The payload column consists of an array of HKAudiogramSensitivityPoints, encoded with an NSKeyedArchiver.

Workouts

Workouts can be queried from the database similar to other samples:

let workouts = try db.workouts(from: .distantPast, to: .now)
let runs = try db.workouts(type: .running)

HealthKit doesn't allow the creation of HKWorkouts outside of the HKHealthStore, so this framework uses it's own Workout type. The workouts have mostly similar fields, including the associated workoutActivities and workoutEvents. Statistics are not yet included.

Workouts are entries in the samples table with data_type == 79. There is a matching entry in workouts with samples.data_id == workouts.data_id.

Workout activities are contained in workout_activities where workouts.data_id == workout_activities.owner_id. Similarly, workout events are contained in workout_events where workouts.data_id == workout_events.owner_id.

Workout routes are entries in the data_series table.

Workout routes

Workout routes are just location series and are linked to workouts. As with workouts, this library uses it's own WorkoutRoute type, with similar fields to an HKWorkoutRoute.

let workout: Workout = ...
if let route = try db.route(associatedWith: workout) {
    let locations = try db.locations(associatedWith: route)
}

Data series are partially stored in the table data_series, but they also contain a sample in the samples table with data_type == 102 and the same data_id. The data_series table seems to currently only contain location series.

The column hfd_key links the data series to entries in the table location_series_data where data_series.hfd_key == location_series_data.series_identifier.

Samples associated with workouts

You can request additional samples associated with a workout:

let workout: Workout = ...
let heartRateSamples = try db.samples(ofType: HeartRate.self, associatedWith: workout)

Both category and quantity samples can be requested.

Workout statistics

The database stores some statistics about workout activities in a separate table.

let workout: Workout = ...
let activity = workout.workoutActivities.first!
let statistics = try db.statistics(associatedWith: activity)
let speed = statistics[.init(.runningSpeed)]

The resulting Statistics types are similar to HKStatistics, but with fewer properties (just average, minimum and maximum). Presumably HealthKit computes the other properties on the fly.

It's also possible to get statistics of a specific type:

let workout: Workout = ...
let activity = workout.workoutActivities.first!
let speed = try db.statistics(for: RunningSpeed.self, associatedWith: activity)
print(speed!.average)

Or, even quicker:

let minSpeed = try db.minimum(for: RunningSpeed.self, associatedWith: activity)

Statistics are stored in the workout_statistics table. They are linked to workout activities by workout_activities.ROWID == workout_statistics.workout_activity_id.

Workout heart rate zones

Health stores heart rate zone data for workouts. This data contains the configured heart rate intervals for the zones, as well as the time spent in them.

let zoneData = try db.heartRateZones(associatedWith: workout)
print(zoneData.zones[0].lowerBound) // BPM
print(zoneData.times[0]) // Time in seconds

The data is stored in binary format in two private metadata fields HKPrivateMetadataKey.workoutHeartRateZones and HKPrivateMetadataKey.workoutElapsedTimeInHeartRateZones. The first can be decoded as an array of RawZone objects containing upper and lower heart rate bounds using a PropertyListDecoder. The second is also a property list, containing a dictionairy of integer keys and double values, representing the duration associated with each zone index. There are additional private metadata fields apparently assocaited with workout zones, but their use is currently unknown:

• HKPrivateMetadataKey.workoutHeartRateZonesConfigurationType: Int
• HKPrivateMetadataKey.workoutHeartRateZonesCurrentZoneIndex: Int
• HKPrivateMetadataKey.workoutHeartRateZonesLastProcessedEntryDate: Date
• HKPrivateMetadataKey.workoutHeartRateZonesLastProcessedEventDate: Date

Workout configuration

Health stores configuration data as metadata with every workout, which can be accessed:

let config = try db.configuration(associatedWith: workout)

It's not fully clear what each property of the configuration represents, since the format has been reconstructed from a private field where no documentation exists. Apple may change the data structures at any time, so this feature may or may not work for you.

Workout configuration is stored as metadata on HKWorkout samples using the key HKMetadataPrivateKey.workoutConfiguration (raw value _HKPrivateWorkoutConfiguration). The configuration is stored as binary data, which can be decoded as JSON (using the internal type RawWorkoutConfiguration). This struct contains a few values, and another data field, which again contains a JSON payload. Decoding this data using RawConfigurationData yields more properties and two more binary fields (goal and activityType). Both of these are encoded using NSKeyedArchiver, and the underlying encoded classes are unknown. They are internally reconstructed based on available samples as NLSessionActivityGoal and FIUIWorkoutActivityType. All of that data is then combined into a public type for convenience.

Converting workouts

It's possible to insert Workouts into a proper HKHealthStore:

let heartRateSamples: [HKSample] = ...
let routePoints: [CLLocation] = ...
let savedWorkout: HKWorkout = try workout.insert(
    into: HKHealthStore(), 
    samples: heartRateSamples,
    route: locations)

ECG Samples

Electrocardiogram samples can be accessed using:

let ecgs = try db.electrocardiograms(from: .distantPast, to: distantFuture)

The elements returned are Electrocardiograms which is a custom type similar to HKElectrocardiogram and with largely the same properties.

To get the associated voltage measurements:

let electrocardiogram: Electrocardiogram = ...
let voltages = try db.voltageMeasurements(associatedWith: electrocardiogram)

The voltages are HKQuantitys with Volt units.

In the database, electrocardiograms are stored in the ecg_samples table, which is also linked to the samples table via the data_id column. ECG Samples have the data_type 144. The samples have associated voltage_payload (SQLite BLOB), which is encoded using protobuf. The concrete specification can be viewed in the ECGVoltageData.proto file. It contains an array of the voltage samples in microvolts, as well as the sampling frequency and an unknown property.

Sleep schedules

The database includes a list of sleep schedules, which represent the bed time and wake time specified for the different weekdays.

let samples = try store.sleepSchedules(from: .distantPast, to: .now)

Sleep schedule samples are stored in the sleep_schedule_samples table, which contains the days for which the schedule is relevant, plus the sleep and wake time. The samples are linked to entries in the samples table via the dataId column.

Related projects and info

Related:

• Export/import health data to JSON
• Import record from Health App Export
• Create Health data during UI Tests