Skip to content

Latest commit

 

History

History
85 lines (74 loc) · 2.79 KB

INSTALL.md

File metadata and controls

85 lines (74 loc) · 2.79 KB
Raw

Minimum Requirements

  1. Cmake 2.8.7
  2. Eigen
  3. dynet (Don't have to install this separately; will be installed below)

Installation Steps

These steps have been tested on Ubuntu 16.04 and macOS Sierra.

  1. Once this repository has been cloned, the dynet/ submodule needs to be synced
git submodule init
git submodule update
  1. This will download the required files to dynet directory. Let this directory be PATH_TO_DYNET.
PATH_TO_DYNET=<your_stack_lstm_dir>/dynet/
  1. Download the C++ library eigen which is used by dynet:
cd $HOME
hg clone https://bitbucket.org/eigen/eigen/
cd eigen

Note: There were compilation issues with some versions of eigen. This installation has been successful with Eigen v3.3.1 4. Now, create a build directory and install eigen:

mkdir build
cd build
cmake ..
  1. Run sudo make install. This will push the library files to the local include directory. On Ubuntu 16.04 and macOS Sierra, they are copied to /usr/local/include/eigen3.
  2. Go back to dynet directory in stack-lstm-ner and build dynet. Modify the code below with your eigen3 include location and boost location.
cd $PATH_TO_DYNET
mkdir build
cd build
cmake .. -DEIGEN3_INCLUDE_DIR=/usr/local/include/eigen3
make -j 2

Note: If DYNET fails to compile and throws an error like this:

$ make -j 2
Scanning dependencies of target dynet
Scanning dependencies of target dynet_shared
[  1%] [  2%] Building CXX object dynet/CMakeFiles/dynet.dir/cfsm-builder.cc.o
Building CXX object dynet/CMakeFiles/dynet_shared.dir/cfsm-builder.cc.o
In file included from /home/user/dynet/dynet/dynet.h:13:0,
                 from /home/user/dynet/dynet/cfsm-builder.h:6,
                 from /home/user/dynet/dynet/cfsm-builder.cc:1:
/home/user/dynet/dynet/tensor.h:22:42: fatal error: unsupported/Eigen/CXX11/Tensor: No such file or directory
#include <unsupported/Eigen/CXX11/Tensor>
                                          ^
compilation terminated.

Then, download and install a stable version of Eigen and rebuild DyNet:

cd $HOME
wget u.cs.biu.ac.il/~yogo/eigen.tgz
tar zxvf eigen.tgz
cd eigen

Repeat step 4 and run:

cd $PATH_TO_DYNET/build
rm -rf *

Now, rebuild DyNet again. 7. Create a build directory in <stack_lstm_dir> and in the same directory stack-lstm-ner, do cmake . -DEIGEN3_INCLUDE_DIR=/usr/local/include/eigen3 and then make. This will build lstm-parse in ner-system

Debugging build errors

If you want to see the compile commands that are used, you can run

make VERBOSE=1