Arduino Websockets

A library for writing modern websockets applications with Arduino (ESP8266 and ESP32). This project is based on my project TinyWebsockets.

The library provides simple and easy interface for websockets work (Client and Server). See the basic-usage guide and the examples.

Please check out the TinyWebsockets Wiki for many more details!

Getting Started

This section should help you get started with the library. If you have any questions feel free to open an issue.

Prerequisites

Currently (version 0.4.*) the library only works with ESP8266 and ESP32.

Installing

You can install the library from the Arduino IDE or using a release ZIP file from the Github release page. Detailed instructions can be found here.

Basic Usage

Client

Creating a client and connecting to a server:

WebsocketsClient client;
client.connect("ws://your-server-ip:port/uri");

Sending a message:

client.send("Hello Server!");

Waiting for messages:

client.onMessage([](WebsocketsMessage msg){
    Serial.prinln("Got Message: " + msg.data());
});

In order to keep receiving messages, you should:

void loop() {
    client.poll();
}

Server

Creating a server and listening for connections:

WebsocketsServer server;
server.listen(8080);

Accepting connections:

WebsocketsClient client = server.accept();
// handle client as described before :)

Full Examples

Client

#include <ArduinoWebsockets.h>
#include <ESP8266WiFi.h>

const char* ssid = "ssid"; //Enter SSID
const char* password = "password"; //Enter Password
const char* websockets_server = "www.myserver.com:8080"; //server adress and port

using namespace websockets;

void onMessageCallback(WebsocketsMessage message) {
    Serial.print("Got Message: ");
    Serial.println(message.data());
}

void onEventsCallback(WebsocketsEvent event, String data) {
    if(event == WebsocketsEvent::ConnectionOpened) {
        Serial.println("Connnection Opened");
    } else if(event == WebsocketsEvent::ConnectionClosed) {
        Serial.println("Connnection Closed");
    } else if(event == WebsocketsEvent::GotPing) {
        Serial.println("Got a Ping!");
    } else if(event == WebsocketsEvent::GotPong) {
        Serial.println("Got a Pong!");
    }
}

WebsocketsClient client;
void setup() {
    Serial.begin(115200);
    // Connect to wifi
    WiFi.begin(ssid, password);

    // Wait some time to connect to wifi
    for(int i = 0; i < 10 && WiFi.status() != WL_CONNECTED; i++) {
        Serial.print(".");
        delay(1000);
    }

    // Setup Callbacks
    client.onMessage(onMessageCallback);
    client.onEvent(onEventsCallback);
    
    // Connect to server
    client.connect(websockets_server);

    // Send a message
    client.send("Hi Server!");
    // Send a ping
    client.ping();
}

void loop() {
    client.poll();
}

Note: for ESP32 you only need to change to code that connects to WiFi (replace #include <ESP8266WiFi.h> with #include <WiFi.h>), everything else stays the same.

Server

#include <ArduinoWebsockets.h>
#include <ESP8266WiFi.h>

const char* ssid = "ssid"; //Enter SSID
const char* password = "password"; //Enter Password

using namespace websockets;

WebsocketsServer server;
void setup() {
  Serial.begin(115200);
  // Connect to wifi
  WiFi.begin(ssid, password);

  // Wait some time to connect to wifi
  for(int i = 0; i < 15 && WiFi.status() != WL_CONNECTED; i++) {
      Serial.print(".");
      delay(1000);
  }
  
  Serial.println("");
  Serial.println("WiFi connected");
  Serial.println("IP address: ");
  Serial.println(WiFi.localIP());   //You can get IP address assigned to ESP

  server.listen(80);
  Serial.print("Is server live? ");
  Serial.println(server.available());
}

void loop() {
  auto client = server.accept();
  if(client.available()) {
    auto msg = client.readBlocking();

    // log
    Serial.print("Got Message: ");
    Serial.println(msg.data());

    // return echo
    client.send("Echo: " + msg.data());

    // close the connection
    client.close();
  }
  
  delay(1000);
}

Note: for ESP32 you only need to change to code that connects to WiFi (replace #include <ESP8266WiFi.h> with #include <WiFi.h>), everything else stays the same.

Binary Data

For binary data it is recommended to use msg.rawData() which returns a std::string, or msg.c_str() which returns a const char*. The reason is that msg.data() returns an Arduino String, which is great for Serial printing and very basic memory handling but bad for most binary usages.

See issue #32 for further information.

SSL and WSS Support

No matter what board you are using, in order to use WSS (websockets over SSL) you need to use

client.connect("wss://your-secured-server-ip:port/uri");

The next sections describe board-specific code for using WSS with the library.

ESP8266

With the esp8266 there are multiple ways for using WSS. By default, ArduinoWebsockets does not validate the certificate chain. This can be set explicitly using:

client.setInsecure();

You can also use a SSL Fingerprint to validate the SSL connection, for example:

const char ssl_fingerprint[] PROGMEM = "D5 07 4D 79 B2 D2 53 D7 74 E6 1B 46 C5 86 4E FE AD 00 F1 98";

client.setFingerprint(ssl_fingerprint);

or you could use the setKnownKey() method to specify the public key of a certificate in order to validate the server you are connecting to.

PublicKey *publicKey = new PublicKey(public_key);
client.setKnownKey(publicKey);

or you can specify the Certificate Authority (CA) using setTrustAnchors method, as follows:

X509List *serverTrustedCA = new X509List(ca_cert);
client.setTrustAnchors(serverTrustedCA);

For client-side certificate validation, you can use RSA or EC certificates, using the method setClientRSACert or setClientECCert .

ESP32

With the esp32 you could either provide the full certificate, or provide no certificate. An example for setting CA Certificate:

const char ssl_ca_cert[] PROGMEM = \
    "-----BEGIN CERTIFICATE-----\n" \
    "MIIEkjCCA3qgAwIBAgIQCgFBQgAAAVOFc2oLheynCDANBgkqhkiG9w0BAQsFADA/\n" \
    "MSQwIgYDVQQKExtEaWdpdGFsIFNpZ25hdHVyZSBUcnVzdCBDby4xFzAVBgNVBAMT\n" \
    "DkRTVCBSb290IENBIFgzMB4XDTE2MDMxNzE2NDA0NloXDTIxMDMxNzE2NDA0Nlow\n" \
    "SjELMAkGA1UEBhMCVVMxFjAUBgNVBAoTDUxldCdzIEVuY3J5cHQxIzAhBgNVBAMT\n" \
    "GkxldCdzIEVuY3J5cHQgQXV0aG9yaXR5IFgzMIIBIjANBgkqhkiG9w0BAQEFAAOC\n" \
    "AQ8AMIIBCgKCAQEAnNMM8FrlLke3cl03g7NoYzDq1zUmGSXhvb418XCSL7e4S0EF\n" \
    "q6meNQhY7LEqxGiHC6PjdeTm86dicbp5gWAf15Gan/PQeGdxyGkOlZHP/uaZ6WA8\n" \
    "SMx+yk13EiSdRxta67nsHjcAHJyse6cF6s5K671B5TaYucv9bTyWaN8jKkKQDIZ0\n" \
    "Z8h/pZq4UmEUEz9l6YKHy9v6Dlb2honzhT+Xhq+w3Brvaw2VFn3EK6BlspkENnWA\n" \
    "a6xK8xuQSXgvopZPKiAlKQTGdMDQMc2PMTiVFrqoM7hD8bEfwzB/onkxEz0tNvjj\n" \
    "/PIzark5McWvxI0NHWQWM6r6hCm21AvA2H3DkwIDAQABo4IBfTCCAXkwEgYDVR0T\n" \
    "AQH/BAgwBgEB/wIBADAOBgNVHQ8BAf8EBAMCAYYwfwYIKwYBBQUHAQEEczBxMDIG\n" \
    "CCsGAQUFBzABhiZodHRwOi8vaXNyZy50cnVzdGlkLm9jc3AuaWRlbnRydXN0LmNv\n" \
    "bTA7BggrBgEFBQcwAoYvaHR0cDovL2FwcHMuaWRlbnRydXN0LmNvbS9yb290cy9k\n" \
    "c3Ryb290Y2F4My5wN2MwHwYDVR0jBBgwFoAUxKexpHsscfrb4UuQdf/EFWCFiRAw\n" \
    "VAYDVR0gBE0wSzAIBgZngQwBAgEwPwYLKwYBBAGC3xMBAQEwMDAuBggrBgEFBQcC\n" \
    "ARYiaHR0cDovL2Nwcy5yb290LXgxLmxldHNlbmNyeXB0Lm9yZzA8BgNVHR8ENTAz\n" \
    "MDGgL6AthitodHRwOi8vY3JsLmlkZW50cnVzdC5jb20vRFNUUk9PVENBWDNDUkwu\n" \
    "Y3JsMB0GA1UdDgQWBBSoSmpjBH3duubRObemRWXv86jsoTANBgkqhkiG9w0BAQsF\n" \
    "AAOCAQEA3TPXEfNjWDjdGBX7CVW+dla5cEilaUcne8IkCJLxWh9KEik3JHRRHGJo\n" \
    "uM2VcGfl96S8TihRzZvoroed6ti6WqEBmtzw3Wodatg+VyOeph4EYpr/1wXKtx8/\n" \
    "wApIvJSwtmVi4MFU5aMqrSDE6ea73Mj2tcMyo5jMd6jmeWUHK8so/joWUoHOUgwu\n" \
    "X4Po1QYz+3dszkDqMp4fklxBwXRsW10KXzPMTZ+sOPAveyxindmjkW8lGy+QsRlG\n" \
    "PfZ+G6Z6h7mjem0Y+iWlkYcV4PIWL1iwBi8saCbGS5jN2p8M+X+Q7UNKEkROb3N6\n" \
    "KOqkqm57TH2H3eDJAkSnh6/DNFu0Qg==\n" \
    "-----END CERTIFICATE-----\n";

client.setCACert(ssl_ca_cert);

Contributing

Contributions are welcomed! Please open issues if you have troubles while using the library or any queshtions on how to get started. Pull requests are welcomed, please open an issue first.

Contributors

Thanks for everyone who reported a bug, suggested a feature and contributed to the development of this library.

⭐️ ramdor	⭐️ xgarb	matsujirushi	bastienvans	johneakin	lalten	elielmarcos
⭐️ adelin-mcbsoft	⭐️ Jonty	Nufflee	mmcArg	JohnInWI	logdog2709	elC0mpa
⭐️ oofnik	⭐️ zastrixarundell

Change Log

• 14/02/2019 (v0.1.1) - Initial commits and support for ESP32 and ESP8266 Websocket Clients.
• 16/02/2019 (v0.1.2) - Added support for events (Pings, Pongs) and more internal improvements (events handling according to RFC-6455)
• 20/02/2019 (v0.1.3) - Users now dont have to specify TCP client types (ESP8266/ESP32) they are selected automatically.
• 21/02/2019 (v0.1.5) - Bug Fixes. Client now exposes a single string connect interface.
• 24/02/2019 (v0.2.0) - User-facing interface is now done with Arduino's String class. Merged more changes (mainly optimizations) from TinyWebsockets.
• 25/02/2019 (v0.2.1) - A tiny patch. Fixed missing user-facing strings for client interface.
• 07/03/2019 (v0.3.0) - A version update. Now supports a websockets server, better support for fragmented messages and streams. bug fixes and more optimized networking implementations.
• 08/03/2019 (v0.3.1) - Small patch. Merged changes from TinyWebsockets - interface changes to callbacks (partial callbacks without WebsocketsClient& as first parameter).
• 12/03/2019 (v0.3.2) - Fixed a bug with behaviour of WebsokcetsClient (copy c'tor and assignment operator). Added close codes from TinyWebsockets. Thank you @ramdor
• 13/03/2019 (v0.3.3) - Fixed a bug in the esp8266 networking impl. Thank you @ramdor
• 14/03/2019 (v0.3.4) - changed underling tcp impl for esp8266 and esp32 to use setNoDelay(true) instead of sync communication. This makes communication faster and more relaiable than default. Thank you @ramdor for pointing out these methods.
• 06/04/2019 (v0.3.5) - added very basic support for WSS in esp8266 (no support for fingerprint/ca or any kind of chain validation).
• 22/04/2019 (v0.4.0) - Added WSS support for both esp8266 and esp32. E328266 can use client.setInsecure() (does not validate certificate chain) or client.setFingerprint(fingerprint) in order to use WSS. With ESP32 there is client.setCACert(certificate) that can be used. (Usage is same as the built in WiFiClientSecure).
• 18/05/2019 (v0.4.1) - Patch! Addressed an error with some servers. The bugs where first noted in issue #9. Bug was that some servers will drop connections that don't use masking, and TinyWebsockets does not use masking by default. TinyWebsockets changed that and this library merged the changes.
• 24/05/2019 (v0.4.2) - Patch! Adressed masking issues - server to client messages would get masked but RFC forbbids it. (changes merged from TinyWebsockets)
• 07/06/2019 (v0.4.3) - Patch! Fixed a bug on some clients (mainly FireFox websokcets impl). Thank you @xgarb (related issue)
• 09/06/2019 (v0.4.4) - Patch! Fixed an issue with close event callback not called in some cases (sudden disconnect, for example). Thank you @adelin-mcbsoft for pointing out the issue (related issue)
• 14/06/2019 (v0.4.5) - Patch! Fixed a memory leak and an unnecessary use of heap memory in case of masking messages. This was discoverd thanks to issue #16. Thank you xgarb!
• 13/07/2019 (v0.4.6) - Very small update. Changed readme to document esp32's secured client behvior (As discussed in issue #18). Also esp32's version of WebsocketsClient now has a setInsecure method. Thank you adelin-mcbsoft!
• 25/07/2019 (v0.4.7) - Bugfix. Fixed issues with receving large messages (unchecked reads) which was pointed out in in issue #21). Thank you Jonty!
• 26/07/2019 (v0.4.8) - Feature. Added an addHeader method as suggested in issue #22). Thank you mmcArg!
• 01/08/2019 (v0.4.9) - Patch - Bugfix. Worked around a bug where connecting to unavailable endpoints would not return false (this is a bug with the WiFiClient library itself). Added some missing keywords. Thank you Nufflee for pointing out the issue!
• 10/08/2019 (v0.4.10) - Patch - Bugfix. Fixed a bug (and general in-stability) caused from unchecked and unsafe read operations on sockets. Also improved memory usage and management. Thank you Jonty for openning and helping with the issue!
• 14/09/2019 (v0.4.11) - Bugfixes - masking settings used to not get copied when using assignment between WebsocketClient instances. Also handshake validation is now case insensitive. Thank you logdog2709 for pointing out the issue.
• 12/10/2019 (v0.4.12) - Patch - Messages are now sent as a single TCP buffer instead of separate messages. Thank you elC0mpa for posting the issue.
• 19/10/2019 (v0.4.13) - Patch - added yield calls in order to prevent software-watchdog resets on esp8266 (on long messages). Thank you elC0mpa for documenting and helping with the issue.
• 22/11/2019 (v0.4.14) - Added rawData and c_str as acccessors in WebsocketsMessage so now the raw data can be acccessed which should solve issue #32 and not break any existing sketch.
• 24/02/20 (v0.4.15) - Added Origin and User-Agent headers to requests sent by the library, this seems to be required by some servers. Thank you imesut for pointing out the issue.
• 21/04/20 (v0.4.16) - Merged pull request by @oofnik which added 2 way SSL auth for ESP32 and ES8266. Thank you very oofnik for the contribuation.
• 25/04/20 (v0.4.17) - Merged pull request by Luka Bodroža (@zastrixarundell) which fixed issue #69 - default headers (like Origin, Host) are now customizable via the addHeader method. Thank you zastrixarundell for the contribution.
• 23/07/20 (v0.4.18) - Merged pull request by Adelin U (@adelin-mcbsoft) which fixed issue #84 - SSL bug-fixing, implemented public-key certificate validation & EC Certificates for client-side. Thank you Adelin!