Skip to content

Latest commit

 

History

History
323 lines (232 loc) · 7.1 KB

linux-pipx.md

File metadata and controls

323 lines (232 loc) · 7.1 KB
Raw

PyRadio pipx installation on Linux

Table of contents

[ Return to PyRadio Build Instructions ]

Preface

This document will help you install PyRadio within a virtual environment using pipx.

In order to install PyRadio to your system you will:

  1. Install a media player
  2. Download the installation script
  3. Install the basic python system and PyRadio installation dependencies
  4. Choose the type of PyRadio installation
  5. Perform the installation

In order to decide which type of installation to perform, here are a couple of things you have to consider.

There are two installation types you can use for PyRadio:

  1. Fully isolated installation
    This type of installation will install all PyRadio dependencies inside a virtual environment.

    The advantage is that the system's python installation is not cluttered with the package's dependencies.

    The disadvantage is that installing the dependencies in a virtual environment may fail.

  2. System dependent installation
    This type of installation requires that all PyRadio dependencies are installed outside the virtual environment used by PyRadio. All dependencies must be provided by the distribution (i.e. exist in the distribution repositories).

Install a media player

PyRadio relies on the existence of at least one of the following media players: mpv, mplayer or vlc.

Please install at least one of them beforehand:

# on Debian
sudo apt-get install [ mpv / mplayer / vlc ]

# on Fedora
sudo dnf install [ mpv / mplayer / vlc ]

# on openSUSE
sudo zypper install [ mpv / mplayer / vlc ]

Get the installation script

Open a terminal and execute:

cd
wget https://raw.githubusercontent.com/coderholic/pyradio/master/pyradio/install.py

or using curl:

cd
curl -L \
    https://raw.githubusercontent.com/coderholic/pyradio/master/pyradio/install.py \
    -o install.py

Please follow the instructions that match/suit your distribution.

Debian and derivatives

Note: The following instructions were tested on a freshly installed Debian Testing.

Install the requirements for the installation script:

sudo apt-get install \
    python3-full \
    python3-pip \
    python3-rich \
    python3-requests \
    python3-netifaces \
    libpython3-all-dev

Then install pipx:

sudo apt-get install pipx

If that fails, execute:

python3 -m pip install pipx

Finally, execute:

python3 -m pipx ensurepath

and exit the terminal.

Fully isolated installation - Debian

Open a terminal and execute:

cd
python3 install.py -i

System dependent installation - Debian

Install dependencies:

sudo apt-get install \
    python3-dnspython \
    python3-psutil \
    python3-netifaces \
    python3-dateutil

Install PyRadio:

cd
python3 install.py

Fedora and derivatives

Note: The following instructions were tested on a freshly installed Fedora 38 Workstation.

Execute:

sudo dnf install \
    python3-pip \
    python3-wheel \
    python3-rich \
    python3-requests \
    python3-netifaces \
    pipx

And

python3 -m pipx ensurepath

and exit the terminal.

Fully isolated installation - fedora

Open a terminal and execute:

sudo dnf install gcc python3-devel

And finally:

cd
python install.py -i

System dependent installation - fedora

Open a terminal and execute:

sudo dnf install \
    python3-netifaces \
    python3-psutil \
    python3-dns \
    python3-dateutil

Install PyRadio:

cd
python install.py

openSUSE and derivatives

Note: The following instructions were tested on a freshly installed openSUSE Tumbleweed 20230427.

Execute:

sudo zypper install \
    python310-requests \
    python310-rich
# install pipx through pip to get the latest version (1.1.0+)
# at the time of writing this, a very old pipx version (0.14.0.0)
# was available on the openSUSE Tumbleweed repositories
python3 -m pip install --user pipx
python3 -m pipx ensurepath

and close the terminal.

Fully isolated installation - openSUSE

Open a terminal and execute:

sudo zypper install \
    gcc \
    python310-dev

Install PyRadio:

cd
python3 install.py -i

System dependent installation - openSUSE

Open a terminal and install PyRadio dependencies:

sudo zypper install \
    python3-psutil \
    python3-dnspython \
    python3-dateutil \
    python3-netifaces

Finally, install PyRadio:

cd
python3 install.py

PyRadio Cache

Using pipx (a third party package) to deploy PyRadio on a system, may cause problems by itself.

pipx is able to correct some of these issues (according to its documentation), by executing:

pipx list

Furthermore, issues can also be resolved by reinstalling a package:

pipx reinstall pyradio

or even all pipx installed packages:

pipx reinstall-all

For these last commands to work, PyRadio source code must be available and present at the location it receded when the original installation took place.

PyRadio will keep a cache of ZIP files and a folder called pyradio-source in its cache folder (typically ~/.cache/pyradio) or in its data folder, on Windows; all files will be kept in a folder called _cache.

Normally, just one ZIP file has to be present in the cache; the ZIP with the latest PyRadio version code. If more ZIP files are present in the cache, they can safely be deleted.

To see the contents of the cache (provided you have downloaded the latest install.py), execute:

python install.py -sc

To open the cache folder, execute:

python install.py -oc

To clear the cache (delete all ZIP files but the latest), execute:

python install.py -cc

If for some reason the cache has been lost, or got corrupted, you can just:

python install.py -oc

Delete all file and then:

python install.py -gc

This will download the latest stable ZIP file and unzip it into the pyradio-source folder.

And of course, if you have a working PyRadio installation, you can execute:

pyradio -sc
pyradio -oc
pyradio -cc
pyradio -gc