Coinkite Tap Protocol and Helper Program

This Python library enables easy communication with TAPSIGNER^™, SATSCARD^™ and SATSCHIP^™.

Repository contents:

The protocol specification
Python library for speaking the protocol
Supporting documentation

Examples/Libraries in other languages:

C++ https://github.com/nunchuk-io/tap-protocol
React Native https://github.com/bithyve/cktap-protocol-react-native
ffi https://github.com/thunderbiscuit/cktap-ffi
Rust https://github.com/notmandatory/rust-cktap

Documentation Links

Docs and Spec subdirectory (./docs)
Emulator README
Testing README

Install

Setup For Everyday Use

First update pip to latest version and install wheel (otherwise legacy setup.py install will be used)

pip install -U pip wheel

Install cktap, our helpful command-line program, with just:

pip install 'coinkite-tap-protocol[cli]'

OR

If you just want the Python library by itself, use: pip install coinkite-tap-protocol

Setup If You Might Change the Code

Do a git checkout
Make a fresh virtualenv (suggested)
Run:

# only library
pip install --editable .
# or with cktap cmdline utility
pip install --editable '.[cli]'
# for testing purposes
pip install --editable '.[test]'

This installs cktap and any changes you make will be immediately reflected in the installed version.

Requirements

Python 3.6 or higher
pyscard for access to smart card readers
A supported smart card reader. In theory, all smart card USB CCID class-compliant devices should work. Our observations:
- ACS ACR1252U - okay and widely available, and for sale by Coinkite
- Identiv uTrust 3700F - reliable and looks nice
- HID Omnikey 5022 CL (not 5021) - fast, cute, and small
- HID OmniKey 5427 CK - tested Gen1 device, fast, reliable, must disable keyboard wedge via EEM interface on device at http://192.168.63.99/, when correct will identify as VID:PID 076b:5427
- NOT recommended: ACS ACR122U. It can work, and is widely available, but is not reliable.
See requirements.txt file for python packages needed.

Ubuntu/Debian Notes

Installing pyscard require SWIG and libpcsclite:

# run below before installing dependencies with pip
# tested on Ubuntu 20.04 (only)
sudo apt-get install swig
sudo apt-get install libpcsclite-dev

# some newer debian-based distros (ubuntu24) require:
sudo apt-get install pcscd
sudo systemctl enable pcscd

Fedora/Red Hat Notes

Installing pyscard requires SWIG and the pcsc-lite library:

# run below before installing dependencies with pip
# tested on Fedora 37 (only)
sudo dnf install swig pcsc-lite-devel

Windows Notes

Installing pyscard may require SWIG:

Download .zip from http://swig.org.
Extract and move into C:\Program Files.
Add that to system PATH.
Test: swig at command prompt should work.
Run pip install pyscard.

FreeBSD Notes

Tested against 13.0-RELEASE.

pkg install py38-pyscard py38-coincurve
- follow devfs.conf instructions
- install usr/ports/devel/libccid
- add pcscd_enable="YES" to rc.conf
pip install base58
pip install -e git+https://github.com/coinkite/python-bip32.git@iss27#egg=bip32
Make your virtualenv with: virtualenv ENV --system-site-packages
pkg install py38-secp256k1 (pulls a tragic set of dependencies)

NOTE: SWIG is needed to build wheel for pyscard. You may need to run pkg install swig.

Emulator

Python code for an emulator which communicates with cktap via a local Unix socket. It's provided without warranty and isn't installed by default. cktap prefers to speak to the emulator if it is running.

See README for emulator.

Using the Library

SATSCARD

>>> from cktap.transport import find_first
>>> card = find_first()
>>> print(card)
<CKTapCard SATSCARD via NFC: 26NKY-RWPK4-65YR7-BU4WL>
>>> card.address()
'bc1q7h0u5yn8y4pajn94ze4gnhz487c8ysvekusqj5'

TAPSIGNER

>>> from cktap.transport import find_first
>>> card = find_first()
>>> print(card)
<CKTapCard TAPSIGNER via EMU: 2LNJA-NIGMW-Q5AKC-KD5Q2> 
>>> card.get_xpub('123456')
'xpub6DXuQW17LykdXFyEtRrq9Z3MAegRPLAwFovT34afzK6NNHkwJrWCs4Knhrjf1U22QSSbykyzpfRsDZc9ryk9b6VUfGp89vkQw6YjY4CaEQ3'

Using the CLI

Providing CVC

Any command which reveals private key info or changes the state of the card requires the 6-digit numeric code from the back of the card (called CVC, spend code, or Starting PIN Code on TAPSIGNER). You can provide this on the command line, or omit it. Commands requiring the CVC but entered without it will prompt you for the CVC. Some commands display limited information without the CVC. To see more detail, include the CVC on the command line.

Most Useful Commands

cktap library

cktap --version

Get the version of cktap library

cktap list

List all cards detected on any reader attached

cktap certs

Check this card was made by Coinkite

For both SATSCARD and TAPSIGNER

cktap status

Shows status info.

cktap setup

Tells card to pick private key. Chain code can be provided by user. User can verify that provided chain code was used.
called only once on TAPSIGNER, and for each slot setup on SATSCARD

For SATSCARD

cktap open

Opens Bitcoin Core or your other wallet by activating the BITCOIN:addr URL scheme for the current slot of the card.

cktap qr

Displays deposit QR code.

cktap unseal

Unseals the current slot and shows the WIF for funds sweeping.
WIF must be imported into a blockchain-aware wallet.

cktap balance

Calls a web service to get UTXO and show current Bitcoin balance.
Uses tord (if running locally) to proxy the request.

For TAPSIGNER

cktap xpub

Shows the XPUB in effect.

cktap backup

Saves the card's XPRV into an AES-128-CTR encrypted file with the current date.

cktap change OLDPINCODE NEWPINCODE

Use to change the PIN on the card

cktap path

Shows the derivation path in effect, by default: m/84h/0h/0h

For SATSCHIP

cktap upload -i /path/to/image.jpg

collects artwork meta data (title, description, etc) and uploads signed result to public server

Detailed Examples

% cktap
Usage: cktap [OPTIONS] COMMAND [ARGS]...

  Interact with SATSCARD and TAPSIGNER cards via NFC tap.

  Command marked [TS] are only for TAPSIGNER and [SC] only for SATSCARD. All
  [TS] command also work on SATSCHIP (for artwork).

  You can use "bal", or "b" for "balance": any distinct prefix for all
  commands.

Options:
  -i, --card-ident BLAHZ-  Operate on specific card (any substring is enough)
  -w, --wait               Waits until a card is in place.
  -v, --verbose            Show traffic with card.
  --pdb                    Prepare patient for surgery to remove bugs.
  -e, --emulator-cert      Use root cert key generated by emulator
  --root-cert-pubkey TEXT  Provide alternate root cert key for  certificate
                           checks (testing only)
  --version                Show the version and exit.
  --help                   Show this message and exit.

Commands:
  address  [SC] Show current deposit address
  backup   [TS] Backup private key from card into AES-128-CTR encrypted file
  balance  [SC] Show the balance held on all slots
  certs    Check this card was made by Coinkite: Verifies a certificate...
  chain    Get which blockchain (Bitcoin/Testnet) is configured.
  change   [TS] Change the CVC code (PIN code)
  check    Verify you have the spending code (CVC) correct.
  core     [SC] Show JSON needed to import keys into Bitcoin Core
  debug    Start interactive (local) debug session.
  derive   [TS] Change the subkey derivation path to use (shows xpub)
  dump     [SC] Show state of slot number indicated.
  json     [TS] Dump wallet values in JSON format similar to Coldcard...
  list     List all cards detected on any reader attached.
  msg      Sign a short text message
  open     [SC] Get address and open associated local Bitcoin app to...
  path     [TS] Show the subkey derivation path in effect
  qr       [SC] Show current deposit address as a QR (or private key if...
  setup    Setup with a fresh private key.
  status   Show a few things about status of card
  unlock   Clear login delay (takes 15 seconds)
  unseal   [SC] Unseal current slot and reveal private key.
  upload   [SATSCHIP] Upload an image and artwork's metadata to public...
  url      Get website URL used for NFC verification, and optionally open it
  usage    [SC] Show slots usage so far.
  version  Get the version of the card's firmware installed (but not...
  wif      [SC] Show WIF for last unsealed slot, or give slot number
  xpub     [TS] Show the xpub in use


% cktap list
<CKTapCard SATSCARD: 26NKY-RWPK4-65YR7-BU4WL>
<CKTapCard TAPSIGNER: RUIXK-5XI6U-G55IQ-DVGVI>

% cktap -i RUIXK status
-- TAPSIGNER Card --
Card ident: RUIXK-5XI6U-G55IQ-DVGVI
Birth Height: 723471
Number of backups: 25
Current derivation: m/84h/0h/0h

% cktap -i 26NKY status
-- SATSCARD --
Card ident: XDXKQ-W6VW6-GEQI3-ATSC2
Birth Height: 700001
Active Slot: 7
Address: tb1q779z3npw49qs3rhyk8zhh7l0sgyr9uphm6jlp0

SATSCARD

% cktap usage
SLOT# |  STATUS  | ADDRESS
------+----------+-------------
  1   | UNSEALED | (use spend code to view)
  2   | UNSEALED | (use spend code to view)
  3   | UNSEALED | (use spend code to view)
  4   | sealed   | bc1qu4vsv2jqgl0y30ehrs4d0dg23xazpgnxdwuqum
  5   | unused   |
  6   | unused   |
  7   | unused   |
  8   | unused   |
  9   | unused   |
 10   | unused   |

% cktap usage 123456
SLOT# |  STATUS  | ADDRESS
------+----------+-------------
  1   | UNSEALED | bc1q4rdps7e8xkaat4ewmmv0hmunsu20s329tf8pdm
  2   | UNSEALED | bc1qe8q7zjtj7utsjlgsq9vn7dl6gqf7kj02tuuec6
  3   | UNSEALED | bc1q9n97zn2nwp7cdhujsgqpgqpv0z49f70lxz9ns2
  4   | sealed   | bc1qu4vsv2jqgl0y30ehrs4d0dg23xazpgnxdwuqum
  5   | unused   |
  6   | unused   |
  7   | unused   |
  8   | unused   |
  9   | unused   |
 10   | unused   |

% cktap qr -o today.svg
(SVG of QR is saved to file)

% cktap addr
bc1qu4vsv2jqgl0y30ehrs4d0dg23xazpgnxdwuqum

% cktap wif -s 1
Enter spending code (6 digits):
p2wpkh:L16cgmhZJWD7fq3eDi3gL7Yko6WYixxZi4f5T3XxxDCF2HnZdHJa

TAPSIGNER

% cktap status
-- TAPSIGNER Card --
Card ident: RUIXK-5XI6U-G55IQ-DVGVI
Birth Height: 723471
Number of backups: 25
Current derivation: m/84h/0h/0h

% cktap backup 347634
Wrote 109 bytes to: backup-RUIXK-2022-02-16T0926.aes

% hd backup-RUIXK-2022-02-16T0926.aes
00000000  d6 3e 40 59 f0 fd 7a 3d  06 67 a5 94 0b 5d 01 09  |.>@Y..z=.g...]..|
00000010  27 58 c3 2a 1f c1 66 d9  84 84 25 96 af 71 23 a1  |'X.*..f...%..q#.|
00000020  0b bc aa ba c1 a3 98 6d  f2 cd 9c 24 51 8c f7 bf  |.......m...$Q...|
00000030  09 ad 53 0d 9b 07 2b 8e  12 be 73 24 3a 09 a9 3d  |..S...+...s$:..=|
00000040  26 6c 98 59 34 95 aa 78  a1 0b 7a 2b 77 98 1f 7a  |&l.Y4..x..z+w..z|
00000050  d1 cf d6 e6 fd 31 b3 88  1a d9 df 68 03 a3 8b 06  |.....1.....h....|
00000060  db 66 ef d6 ea 5f 5f 08  9a ed f2 2a 71           |.f...__....*q|
0000006d

For more information about specific cktap commands check docs/cli.md

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

README.md

README.md

Coinkite Tap Protocol and Helper Program

Documentation Links

Install

Setup For Everyday Use

Setup If You Might Change the Code

Requirements

Ubuntu/Debian Notes

Fedora/Red Hat Notes

Windows Notes

FreeBSD Notes

Emulator

Using the Library

SATSCARD

TAPSIGNER

Using the CLI

Providing CVC

Most Useful Commands

cktap library

For both SATSCARD and TAPSIGNER

For SATSCARD

For TAPSIGNER

For SATSCHIP

Detailed Examples

SATSCARD

TAPSIGNER

Files

README.md

Latest commit

History

README.md

File metadata and controls

Coinkite Tap Protocol and Helper Program

Documentation Links

Install

Setup For Everyday Use

Setup If You Might Change the Code

Requirements

Ubuntu/Debian Notes

Fedora/Red Hat Notes

Windows Notes

FreeBSD Notes

Emulator

Using the Library

SATSCARD

TAPSIGNER

Using the CLI

Providing CVC

Most Useful Commands

cktap library

For both SATSCARD and TAPSIGNER

For SATSCARD

For TAPSIGNER

For SATSCHIP

Detailed Examples

SATSCARD

TAPSIGNER