Fates 3d case

What this is:

• This is a 3d printed case for "fates" designed in fusion 360
• It has built in standoffs and supports so you don't need to purchase any extra
• The case more or less snaps together

What is missing:

• No consideration was given to cooling/air flow
• There is no USB-C slot at the back of the case
• There no hole for the 4th encoder
• (the above two items were added thanks to james everitt)

Before you print this please know that:

• This is not perfect
• I'd recommend getting it printed by a friend with a 3d printer, or at a local hackerspace instead of spending a lot of money getting it printed using an online service
• The tolerances are really tight. Once you install your Rpi + fates shield it will be a little difficult to remove. You might need a little spudger/pry tools to remove it

Licence

• Creative Commons: Attribution-NonCommercial-ShareAlike 4.0 International
• In other words: you cannot sell this, and if you modify the design you cannot sell that either. Otherwise do whatever your heart desires