WIFI-MQTT-Bridge for Poolstar R32 Pool heat pump f.e.
and maybe others. Please open an issue if you think yours may be compatible so we can check together.
Control and query our new heat pump and later integrate it to the spa controller (will be seperate repo)
for other pictures, please check out the images directory.
- Reverse engineer up to a usable state
- Complete Hardware
- Make docs readable ;-)
Currently, the sensors in the unit are published to MQTT. Target temperature and modes can be set (Auto, Heat, Cool, on/off) but show some inconsistency still to be fixed.
- ESP8266
- RS485 Interface
- Wires & Connectors
- Wire TX/GPIO1 to DI
- Wire RX/GPIO3 to RO
- Wire GPIO2 to DE and RE (Connect all three together)
- Hook up 3.3V Supply to ESP8266
- Hook up 5V Supply to MAX485 Board
- Connect A/Yellow Wire and B/Green wire to MAX485 module (if no proper data is received, try to swap the wires)