chips_lib.v

//IEEE Floating Point Adder (Single Precision)
//Copyright (C) Jonathan P Dawson 2013
//2013-12-12

module adder(
        input_a,
        input_b,
        input_a_stb,
        input_b_stb,
        output_z_ack,
        clk,
        rst,
        output_z,
        output_z_stb,
        input_a_ack,
        input_b_ack);

  input     clk;
  input     rst;

  input     [31:0] input_a;
  input     input_a_stb;
  output    input_a_ack;

  input     [31:0] input_b;
  input     input_b_stb;
  output    input_b_ack;

  output    [31:0] output_z;
  output    output_z_stb;
  input     output_z_ack;

  reg       s_output_z_stb;
  reg       [31:0] s_output_z;
  reg       s_input_a_ack;
  reg       s_input_b_ack;

  reg       [3:0] state;
  parameter get_a         = 4'd0,
            get_b         = 4'd1,
            unpack        = 4'd2,
            special_cases = 4'd3,
            align         = 4'd4,
            add_0         = 4'd5,
            add_1         = 4'd6,
            normalise_1   = 4'd7,
            normalise_2   = 4'd8,
            round         = 4'd9,
            pack          = 4'd10,
            put_z         = 4'd11;

  reg       [31:0] a, b, z;
  reg       [26:0] a_m, b_m;
  reg       [23:0] z_m;
  reg       [9:0] a_e, b_e, z_e;
  reg       a_s, b_s, z_s;
  reg       guard, round_bit, sticky;
  reg       [27:0] sum;

  always @(posedge clk)
  begin

    case(state)

      get_a:
      begin
        s_input_a_ack <= 1;
        if (s_input_a_ack && input_a_stb) begin
          a <= input_a;
          s_input_a_ack <= 0;
          state <= get_b;
        end
      end

      get_b:
      begin
        s_input_b_ack <= 1;
        if (s_input_b_ack && input_b_stb) begin
          b <= input_b;
          s_input_b_ack <= 0;
          state <= unpack;
        end
      end

      unpack:
      begin
        a_m <= {a[22 : 0], 3'd0};
        b_m <= {b[22 : 0], 3'd0};
        a_e <= a[30 : 23] - 127;
        b_e <= b[30 : 23] - 127;
        a_s <= a[31];
        b_s <= b[31];
        state <= special_cases;
      end

      special_cases:
      begin
        //if a is NaN or b is NaN return NaN
        if ((a_e == 128 && a_m != 0) || (b_e == 128 && b_m != 0)) begin
          z[31] <= 1;
          z[30:23] <= 255;
          z[22] <= 1;
          z[21:0] <= 0;
          state <= put_z;
        //if a is inf return inf
        end else if (a_e == 128) begin
          z[31] <= a_s;
          z[30:23] <= 255;
          z[22:0] <= 0;
          state <= put_z;
        //if b is inf return inf
        end else if (b_e == 128) begin
          z[31] <= b_s;
          z[30:23] <= 255;
          z[22:0] <= 0;
          state <= put_z;
        //if a is zero return b
        end else if ((($signed(a_e) == -127) && (a_m == 0)) && (($signed(b_e) == -127) && (b_m == 0))) begin
          z[31] <= a_s & b_s;
          z[30:23] <= b_e[7:0] + 127;
          z[22:0] <= b_m[26:3];
          state <= put_z;
        //if a is zero return b
        end else if (($signed(a_e) == -127) && (a_m == 0)) begin
          z[31] <= b_s;
          z[30:23] <= b_e[7:0] + 127;
          z[22:0] <= b_m[26:3];
          state <= put_z;
        //if b is zero return a
        end else if (($signed(b_e) == -127) && (b_m == 0)) begin
          z[31] <= a_s;
          z[30:23] <= a_e[7:0] + 127;
          z[22:0] <= a_m[26:3];
          state <= put_z;
        end else begin
          //Denormalised Number
          if ($signed(a_e) == -127) begin
            a_e <= -126;
          end else begin
            a_m[26] <= 1;
          end
          //Denormalised Number
          if ($signed(b_e) == -127) begin
            b_e <= -126;
          end else begin
            b_m[26] <= 1;
          end
          state <= align;
        end
      end

      align:
      begin
        if ($signed(a_e) > $signed(b_e)) begin
          b_e <= b_e + 1;
          b_m <= b_m >> 1;
          b_m[0] <= b_m[0] | b_m[1];
        end else if ($signed(a_e) < $signed(b_e)) begin
          a_e <= a_e + 1;
          a_m <= a_m >> 1;
          a_m[0] <= a_m[0] | a_m[1];
        end else begin
          state <= add_0;
        end
      end

      add_0:
      begin
        z_e <= a_e;
        if (a_s == b_s) begin
          sum <= a_m + b_m;
          z_s <= a_s;
        end else begin
          if (a_m >= b_m) begin
            sum <= a_m - b_m;
            z_s <= a_s;
          end else begin
            sum <= b_m - a_m;
            z_s <= b_s;
          end
        end
        state <= add_1;
      end

      add_1:
      begin
        if (sum[27]) begin
          z_m <= sum[27:4];
          guard <= sum[3];
          round_bit <= sum[2];
          sticky <= sum[1] | sum[0];
          z_e <= z_e + 1;
        end else begin
          z_m <= sum[26:3];
          guard <= sum[2];
          round_bit <= sum[1];
          sticky <= sum[0];
        end
        state <= normalise_1;
      end

      normalise_1:
      begin
        if (z_m[23] == 0 && $signed(z_e) > -126) begin
          z_e <= z_e - 1;
          z_m <= z_m << 1;
          z_m[0] <= guard;
          guard <= round_bit;
          round_bit <= 0;
        end else begin
          state <= normalise_2;
        end
      end

      normalise_2:
      begin
        if ($signed(z_e) < -126) begin
          z_e <= z_e + 1;
          z_m <= z_m >> 1;
          guard <= z_m[0];
          round_bit <= guard;
          sticky <= sticky | round_bit;
        end else begin
          state <= round;
        end
      end

      round:
      begin
        if (guard && (round_bit | sticky | z_m[0])) begin
          z_m <= z_m + 1;
          if (z_m == 24'hffffff) begin
            z_e <=z_e + 1;
          end
        end
        state <= pack;
      end

      pack:
      begin
        z[22 : 0] <= z_m[22:0];
        z[30 : 23] <= z_e[7:0] + 127;
        z[31] <= z_s;
        if ($signed(z_e) == -126 && z_m[23] == 0) begin
          z[30 : 23] <= 0;
        end
        //if overflow occurs, return inf
        if ($signed(z_e) > 127) begin
          z[22 : 0] <= 0;
          z[30 : 23] <= 255;
          z[31] <= z_s;
        end
        state <= put_z;
      end

      put_z:
      begin
        s_output_z_stb <= 1;
        s_output_z <= z;
        if (s_output_z_stb && output_z_ack) begin
          s_output_z_stb <= 0;
          state <= get_a;
        end
      end

    endcase

    if (rst == 1) begin
      state <= get_a;
      s_input_a_ack <= 0;
      s_input_b_ack <= 0;
      s_output_z_stb <= 0;
    end

  end
  assign input_a_ack = s_input_a_ack;
  assign input_b_ack = s_input_b_ack;
  assign output_z_stb = s_output_z_stb;
  assign output_z = s_output_z;

endmodule

//IEEE Floating Point Divider (Single Precision)
//Copyright (C) Jonathan P Dawson 2013
//2013-12-12
//
module divider(
        input_a,
        input_b,
        input_a_stb,
        input_b_stb,
        output_z_ack,
        clk,
        rst,
        output_z,
        output_z_stb,
        input_a_ack,
        input_b_ack);

  input     clk;
  input     rst;

  input     [31:0] input_a;
  input     input_a_stb;
  output    input_a_ack;

  input     [31:0] input_b;
  input     input_b_stb;
  output    input_b_ack;

  output    [31:0] output_z;
  output    output_z_stb;
  input     output_z_ack;

  reg       s_output_z_stb;
  reg       [31:0] s_output_z;
  reg       s_input_a_ack;
  reg       s_input_b_ack;

  reg       [3:0] state;
  parameter get_a         = 4'd0,
            get_b         = 4'd1,
            unpack        = 4'd2,
            special_cases = 4'd3,
            normalise_a   = 4'd4,
            normalise_b   = 4'd5,
            divide_0      = 4'd6,
            divide_1      = 4'd7,
            divide_2      = 4'd8,
            divide_3      = 4'd9,
            normalise_1   = 4'd10,
            normalise_2   = 4'd11,
            round         = 4'd12,
            pack          = 4'd13,
            put_z         = 4'd14;

  reg       [31:0] a, b, z;
  reg       [23:0] a_m, b_m, z_m;
  reg       [9:0] a_e, b_e, z_e;
  reg       a_s, b_s, z_s;
  reg       guard, round_bit, sticky;
  reg       [50:0] quotient, divisor, dividend, remainder;
  reg       [5:0] count;

  always @(posedge clk)
  begin

    case(state)

      get_a:
      begin
        s_input_a_ack <= 1;
        if (s_input_a_ack && input_a_stb) begin
          a <= input_a;
          s_input_a_ack <= 0;
          state <= get_b;
        end
      end

      get_b:
      begin
        s_input_b_ack <= 1;
        if (s_input_b_ack && input_b_stb) begin
          b <= input_b;
          s_input_b_ack <= 0;
          state <= unpack;
        end
      end

      unpack:
      begin
        a_m <= a[22 : 0];
        b_m <= b[22 : 0];
        a_e <= a[30 : 23] - 127;
        b_e <= b[30 : 23] - 127;
        a_s <= a[31];
        b_s <= b[31];
        state <= special_cases;
      end

      special_cases:
      begin
        //if a is NaN or b is NaN return NaN
        if ((a_e == 128 && a_m != 0) || (b_e == 128 && b_m != 0)) begin
          z[31] <= 1;
          z[30:23] <= 255;
          z[22] <= 1;
          z[21:0] <= 0;
          state <= put_z;
          //if a is inf and b is inf return NaN
        end else if ((a_e == 128) && (b_e == 128)) begin
          z[31] <= 1;
          z[30:23] <= 255;
          z[22] <= 1;
          z[21:0] <= 0;
          state <= put_z;
        //if a is inf return inf
        end else if (a_e == 128) begin
          z[31] <= a_s ^ b_s;
          z[30:23] <= 255;
          z[22:0] <= 0;
          state <= put_z;
           //if b is zero return NaN
          if ($signed(b_e == -127) && (b_m == 0)) begin
            z[31] <= 1;
            z[30:23] <= 255;
            z[22] <= 1;
            z[21:0] <= 0;
            state <= put_z;
          end
        //if b is inf return zero
        end else if (b_e == 128) begin
          z[31] <= a_s ^ b_s;
          z[30:23] <= 0;
          z[22:0] <= 0;
          state <= put_z;
        //if a is zero return zero
        end else if (($signed(a_e) == -127) && (a_m == 0)) begin
          z[31] <= a_s ^ b_s;
          z[30:23] <= 0;
          z[22:0] <= 0;
          state <= put_z;
           //if b is zero return NaN
          if (($signed(b_e) == -127) && (b_m == 0)) begin
            z[31] <= 1;
            z[30:23] <= 255;
            z[22] <= 1;
            z[21:0] <= 0;
            state <= put_z;
          end
        //if b is zero return inf
        end else if (($signed(b_e) == -127) && (b_m == 0)) begin
          z[31] <= a_s ^ b_s;
          z[30:23] <= 255;
          z[22:0] <= 0;
          state <= put_z;
        end else begin
          //Denormalised Number
          if ($signed(a_e) == -127) begin
            a_e <= -126;
          end else begin
            a_m[23] <= 1;
          end
          //Denormalised Number
          if ($signed(b_e) == -127) begin
            b_e <= -126;
          end else begin
            b_m[23] <= 1;
          end
          state <= normalise_a;
        end
      end

      normalise_a:
      begin
        if (a_m[23]) begin
          state <= normalise_b;
        end else begin
          a_m <= a_m << 1;
          a_e <= a_e - 1;
        end
      end

      normalise_b:
      begin
        if (b_m[23]) begin
          state <= divide_0;
        end else begin
          b_m <= b_m << 1;
          b_e <= b_e - 1;
        end
      end

      divide_0:
      begin
        z_s <= a_s ^ b_s;
        z_e <= a_e - b_e;
        quotient <= 0;
        remainder <= 0;
        count <= 0;
        dividend <= a_m << 27;
        divisor <= b_m;
        state <= divide_1;
      end

      divide_1:
      begin
        quotient <= quotient << 1;
        remainder <= remainder << 1;
        remainder[0] <= dividend[50];
        dividend <= dividend << 1;
        state <= divide_2;
      end

      divide_2:
      begin
        if (remainder >= divisor) begin
          quotient[0] <= 1;
          remainder <= remainder - divisor;
        end
        if (count == 49) begin
          state <= divide_3;
        end else begin
          count <= count + 1;
          state <= divide_1;
        end
      end

      divide_3:
      begin
        z_m <= quotient[26:3];
        guard <= quotient[2];
        round_bit <= quotient[1];
        sticky <= quotient[0] | (remainder != 0);
        state <= normalise_1;
      end

      normalise_1:
      begin
        if (z_m[23] == 0 && $signed(z_e) > -126) begin
          z_e <= z_e - 1;
          z_m <= z_m << 1;
          z_m[0] <= guard;
          guard <= round_bit;
          round_bit <= 0;
        end else begin
          state <= normalise_2;
        end
      end

      normalise_2:
      begin
        if ($signed(z_e) < -126) begin
          z_e <= z_e + 1;
          z_m <= z_m >> 1;
          guard <= z_m[0];
          round_bit <= guard;
          sticky <= sticky | round_bit;
        end else begin
          state <= round;
        end
      end

      round:
      begin
        if (guard && (round_bit | sticky | z_m[0])) begin
          z_m <= z_m + 1;
          if (z_m == 24'hffffff) begin
            z_e <=z_e + 1;
          end
        end
        state <= pack;
      end

      pack:
      begin
        z[22 : 0] <= z_m[22:0];
        z[30 : 23] <= z_e[7:0] + 127;
        z[31] <= z_s;
        if ($signed(z_e) == -126 && z_m[23] == 0) begin
          z[30 : 23] <= 0;
        end
        //if overflow occurs, return inf
        if ($signed(z_e) > 127) begin
          z[22 : 0] <= 0;
          z[30 : 23] <= 255;
          z[31] <= z_s;
        end
        state <= put_z;
      end

      put_z:
      begin
        s_output_z_stb <= 1;
        s_output_z <= z;
        if (s_output_z_stb && output_z_ack) begin
          s_output_z_stb <= 0;
          state <= get_a;
        end
      end

    endcase

    if (rst == 1) begin
      state <= get_a;
      s_input_a_ack <= 0;
      s_input_b_ack <= 0;
      s_output_z_stb <= 0;
    end

  end
  assign input_a_ack = s_input_a_ack;
  assign input_b_ack = s_input_b_ack;
  assign output_z_stb = s_output_z_stb;
  assign output_z = s_output_z;

endmodule

//IEEE Floating Point Multiplier (Single Precision)
//Copyright (C) Jonathan P Dawson 2013
//2013-12-12
module multiplier(
        input_a,
        input_b,
        input_a_stb,
        input_b_stb,
        output_z_ack,
        clk,
        rst,
        output_z,
        output_z_stb,
        input_a_ack,
        input_b_ack);

  input     clk;
  input     rst;

  input     [31:0] input_a;
  input     input_a_stb;
  output    input_a_ack;

  input     [31:0] input_b;
  input     input_b_stb;
  output    input_b_ack;

  output    [31:0] output_z;
  output    output_z_stb;
  input     output_z_ack;

  reg       s_output_z_stb;
  reg       [31:0] s_output_z;
  reg       s_input_a_ack;
  reg       s_input_b_ack;

  reg       [3:0] state;
  parameter get_a         = 4'd0,
            get_b         = 4'd1,
            unpack        = 4'd2,
            special_cases = 4'd3,
            normalise_a   = 4'd4,
            normalise_b   = 4'd5,
            multiply_0    = 4'd6,
            multiply_1    = 4'd7,
            normalise_1   = 4'd8,
            normalise_2   = 4'd9,
            round         = 4'd10,
            pack          = 4'd11,
            put_z         = 4'd12;

  reg       [31:0] a, b, z;
  reg       [23:0] a_m, b_m, z_m;
  reg       [9:0] a_e, b_e, z_e;
  reg       a_s, b_s, z_s;
  reg       guard, round_bit, sticky;
  reg       [49:0] product;

  always @(posedge clk)
  begin

    case(state)

      get_a:
      begin
        s_input_a_ack <= 1;
        if (s_input_a_ack && input_a_stb) begin
          a <= input_a;
          s_input_a_ack <= 0;
          state <= get_b;
        end
      end

      get_b:
      begin
        s_input_b_ack <= 1;
        if (s_input_b_ack && input_b_stb) begin
          b <= input_b;
          s_input_b_ack <= 0;
          state <= unpack;
        end
      end

      unpack:
      begin
        a_m <= a[22 : 0];
        b_m <= b[22 : 0];
        a_e <= a[30 : 23] - 127;
        b_e <= b[30 : 23] - 127;
        a_s <= a[31];
        b_s <= b[31];
        state <= special_cases;
      end

      special_cases:
      begin
        //if a is NaN or b is NaN return NaN
        if ((a_e == 128 && a_m != 0) || (b_e == 128 && b_m != 0)) begin
          z[31] <= 1;
          z[30:23] <= 255;
          z[22] <= 1;
          z[21:0] <= 0;
          state <= put_z;
        //if a is inf return inf
        end else if (a_e == 128) begin
          z[31] <= a_s ^ b_s;
          z[30:23] <= 255;
          z[22:0] <= 0;
          state <= put_z;
           //if b is zero return NaN
          if ($signed(b_e == -127) && (b_m == 0)) begin
            z[31] <= 1;
            z[30:23] <= 255;
            z[22] <= 1;
            z[21:0] <= 0;
            state <= put_z;
          end
        //if b is inf return inf
        end else if (b_e == 128) begin
          z[31] <= a_s ^ b_s;
          z[30:23] <= 255;
          z[22:0] <= 0;
          state <= put_z;
        //if a is zero return zero
        end else if (($signed(a_e) == -127) && (a_m == 0)) begin
          z[31] <= a_s ^ b_s;
          z[30:23] <= 0;
          z[22:0] <= 0;
          state <= put_z;
        //if b is zero return zero
        end else if (($signed(b_e) == -127) && (b_m == 0)) begin
          z[31] <= a_s ^ b_s;
          z[30:23] <= 0;
          z[22:0] <= 0;
          state <= put_z;
        end else begin
          //Denormalised Number
          if ($signed(a_e) == -127) begin
            a_e <= -126;
          end else begin
            a_m[23] <= 1;
          end
          //Denormalised Number
          if ($signed(b_e) == -127) begin
            b_e <= -126;
          end else begin
            b_m[23] <= 1;
          end
          state <= normalise_a;
        end
      end

      normalise_a:
      begin
        if (a_m[23]) begin
          state <= normalise_b;
        end else begin
          a_m <= a_m << 1;
          a_e <= a_e - 1;
        end
      end

      normalise_b:
      begin
        if (b_m[23]) begin
          state <= multiply_0;
        end else begin
          b_m <= b_m << 1;
          b_e <= b_e - 1;
        end
      end

      multiply_0:
      begin
        z_s <= a_s ^ b_s;
        z_e <= a_e + b_e + 1;
        product <= a_m * b_m * 4;
        state <= multiply_1;
      end

      multiply_1:
      begin
        z_m <= product[49:26];
        guard <= product[25];
        round_bit <= product[24];
        sticky <= (product[23:0] != 0);
        state <= normalise_1;
      end

      normalise_1:
      begin
        if (z_m[23] == 0) begin
          z_e <= z_e - 1;
          z_m <= z_m << 1;
          z_m[0] <= guard;
          guard <= round_bit;
          round_bit <= 0;
        end else begin
          state <= normalise_2;
        end
      end

      normalise_2:
      begin
        if ($signed(z_e) < -126) begin
          z_e <= z_e + 1;
          z_m <= z_m >> 1;
          guard <= z_m[0];
          round_bit <= guard;
          sticky <= sticky | round_bit;
        end else begin
          state <= round;
        end
      end

      round:
      begin
        if (guard && (round_bit | sticky | z_m[0])) begin
          z_m <= z_m + 1;
          if (z_m == 24'hffffff) begin
            z_e <=z_e + 1;
          end
        end
        state <= pack;
      end

      pack:
      begin
        z[22 : 0] <= z_m[22:0];
        z[30 : 23] <= z_e[7:0] + 127;
        z[31] <= z_s;
        if ($signed(z_e) == -126 && z_m[23] == 0) begin
          z[30 : 23] <= 0;
        end
        //if overflow occurs, return inf
        if ($signed(z_e) > 127) begin
          z[22 : 0] <= 0;
          z[30 : 23] <= 255;
          z[31] <= z_s;
        end
        state <= put_z;
      end

      put_z:
      begin
        s_output_z_stb <= 1;
        s_output_z <= z;
        if (s_output_z_stb && output_z_ack) begin
          s_output_z_stb <= 0;
          state <= get_a;
        end
      end

    endcase

    if (rst == 1) begin
      state <= get_a;
      s_input_a_ack <= 0;
      s_input_b_ack <= 0;
      s_output_z_stb <= 0;
    end

  end
  assign input_a_ack = s_input_a_ack;
  assign input_b_ack = s_input_b_ack;
  assign output_z_stb = s_output_z_stb;
  assign output_z = s_output_z;

endmodule

//IEEE Floating Point Divider (Double Precision)
//Copyright (C) Jonathan P Dawson 2014
//2014-01-11
//
module double_divider(
        input_a,
        input_b,
        input_a_stb,
        input_b_stb,
        output_z_ack,
        clk,
        rst,
        output_z,
        output_z_stb,
        input_a_ack,
        input_b_ack);

  input     clk;
  input     rst;

  input     [63:0] input_a;
  input     input_a_stb;
  output    input_a_ack;

  input     [63:0] input_b;
  input     input_b_stb;
  output    input_b_ack;

  output    [63:0] output_z;
  output    output_z_stb;
  input     output_z_ack;

  reg       s_output_z_stb;
  reg       [63:0] s_output_z;
  reg       s_input_a_ack;
  reg       s_input_b_ack;

  reg       [3:0] state;
  parameter get_a         = 4'd0,
            get_b         = 4'd1,
            unpack        = 4'd2,
            special_cases = 4'd3,
            normalise_a   = 4'd4,
            normalise_b   = 4'd5,
            divide_0      = 4'd6,
            divide_1      = 4'd7,
            divide_2      = 4'd8,
            divide_3      = 4'd9,
            normalise_1   = 4'd10,
            normalise_2   = 4'd11,
            round         = 4'd12,
            pack          = 4'd13,
            put_z         = 4'd14;

  reg       [63:0] a, b, z;
  reg       [52:0] a_m, b_m, z_m;
  reg       [12:0] a_e, b_e, z_e;
  reg       a_s, b_s, z_s;
  reg       guard, round_bit, sticky;
  reg       [108:0] quotient, divisor, dividend, remainder;
  reg       [6:0] count;

  always @(posedge clk)
  begin

    case(state)

      get_a:
      begin
        s_input_a_ack <= 1;
        if (s_input_a_ack && input_a_stb) begin
          a <= input_a;
          s_input_a_ack <= 0;
          state <= get_b;
        end
      end

      get_b:
      begin
        s_input_b_ack <= 1;
        if (s_input_b_ack && input_b_stb) begin
          b <= input_b;
          s_input_b_ack <= 0;
          state <= unpack;
        end
      end

      unpack:
      begin
        a_m <= a[51 : 0];
        b_m <= b[51 : 0];
        a_e <= a[62 : 52] - 1023;
        b_e <= b[62 : 52] - 1023;
        a_s <= a[63];
        b_s <= b[63];
        state <= special_cases;
      end

      special_cases:
      begin
        //if a is NaN or b is NaN return NaN
        if ((a_e == 1024 && a_m != 0) || (b_e == 1024 && b_m != 0)) begin
          z[63] <= 1;
          z[62:52] <= 2047;
          z[51] <= 1;
          z[50:0] <= 0;
          state <= put_z;
          //if a is inf and b is inf return NaN
        end else if ((a_e == 1024) && (b_e == 1024)) begin
          z[63] <= 1;
          z[62:52] <= 2047;
          z[51] <= 1;
          z[50:0] <= 0;
          state <= put_z;
        //if a is inf return inf
        end else if (a_e == 1024) begin
          z[63] <= a_s ^ b_s;
          z[62:52] <= 2047;
          z[51:0] <= 0;
          state <= put_z;
           //if b is zero return NaN
          if ($signed(b_e == -1023) && (b_m == 0)) begin
            z[63] <= 1;
            z[62:52] <= 2047;
            z[51] <= 1;
            z[50:0] <= 0;
            state <= put_z;
          end
        //if b is inf return zero
        end else if (b_e == 1024) begin
          z[63] <= a_s ^ b_s;
          z[62:52] <= 0;
          z[51:0] <= 0;
          state <= put_z;
        //if a is zero return zero
        end else if (($signed(a_e) == -1023) && (a_m == 0)) begin
          z[63] <= a_s ^ b_s;
          z[62:52] <= 0;
          z[51:0] <= 0;
          state <= put_z;
           //if b is zero return NaN
          if (($signed(b_e) == -1023) && (b_m == 0)) begin
            z[63] <= 1;
            z[62:52] <= 2047;
            z[51] <= 1;
            z[50:0] <= 0;
            state <= put_z;
          end
        //if b is zero return inf
        end else if (($signed(b_e) == -1023) && (b_m == 0)) begin
          z[63] <= a_s ^ b_s;
          z[62:52] <= 2047;
          z[51:0] <= 0;
          state <= put_z;
        end else begin
          //Denormalised Number
          if ($signed(a_e) == -1023) begin
            a_e <= -1022;
          end else begin
            a_m[52] <= 1;
          end
          //Denormalised Number
          if ($signed(b_e) == -1023) begin
            b_e <= -1022;
          end else begin
            b_m[52] <= 1;
          end
          state <= normalise_a;
        end
      end

      normalise_a:
      begin
        if (a_m[52]) begin
          state <= normalise_b;
        end else begin
          a_m <= a_m << 1;
          a_e <= a_e - 1;
        end
      end

      normalise_b:
      begin
        if (b_m[52]) begin
          state <= divide_0;
        end else begin
          b_m <= b_m << 1;
          b_e <= b_e - 1;
        end
      end

      divide_0:
      begin
        z_s <= a_s ^ b_s;
        z_e <= a_e - b_e;
        quotient <= 0;
        remainder <= 0;
        count <= 0;
        dividend <= a_m << 56;
        divisor <= b_m;
        state <= divide_1;
      end

      divide_1:
      begin
        quotient <= quotient << 1;
        remainder <= remainder << 1;
        remainder[0] <= dividend[108];
        dividend <= dividend << 1;
        state <= divide_2;
      end

      divide_2:
      begin
        if (remainder >= divisor) begin
          quotient[0] <= 1;
          remainder <= remainder - divisor;
        end
        if (count == 107) begin
          state <= divide_3;
        end else begin
          count <= count + 1;
          state <= divide_1;
        end
      end

      divide_3:
      begin
        z_m <= quotient[55:3];
        guard <= quotient[2];
        round_bit <= quotient[1];
        sticky <= quotient[0] | (remainder != 0);
        state <= normalise_1;
      end

      normalise_1:
      begin
        if (z_m[52] == 0 && $signed(z_e) > -1022) begin
          z_e <= z_e - 1;
          z_m <= z_m << 1;
          z_m[0] <= guard;
          guard <= round_bit;
          round_bit <= 0;
        end else begin
          state <= normalise_2;
        end
      end

      normalise_2:
      begin
        if ($signed(z_e) < -1022) begin
          z_e <= z_e + 1;
          z_m <= z_m >> 1;
          guard <= z_m[0];
          round_bit <= guard;
          sticky <= sticky | round_bit;
        end else begin
          state <= round;
        end
      end

      round:
      begin
        if (guard && (round_bit | sticky | z_m[0])) begin
          z_m <= z_m + 1;
          if (z_m == 53'hffffff) begin
            z_e <=z_e + 1;
          end
        end
        state <= pack;
      end

      pack:
      begin
        z[51 : 0] <= z_m[51:0];
        z[62 : 52] <= z_e[10:0] + 1023;
        z[63] <= z_s;
        if ($signed(z_e) == -1022 && z_m[52] == 0) begin
          z[62 : 52] <= 0;
        end
        //if overflow occurs, return inf
        if ($signed(z_e) > 1023) begin
          z[51 : 0] <= 0;
          z[62 : 52] <= 2047;
          z[63] <= z_s;
        end
        state <= put_z;
      end

      put_z:
      begin
        s_output_z_stb <= 1;
        s_output_z <= z;
        if (s_output_z_stb && output_z_ack) begin
          s_output_z_stb <= 0;
          state <= get_a;
        end
      end

    endcase

    if (rst == 1) begin
      state <= get_a;
      s_input_a_ack <= 0;
      s_input_b_ack <= 0;
      s_output_z_stb <= 0;
    end

  end
  assign input_a_ack = s_input_a_ack;
  assign input_b_ack = s_input_b_ack;
  assign output_z_stb = s_output_z_stb;
  assign output_z = s_output_z;

endmodule

//IEEE Floating Point Multiplier (Double Precision)
//Copyright (C) Jonathan P Dawson 2014
//2014-01-10
module double_multiplier(
        input_a,
        input_b,
        input_a_stb,
        input_b_stb,
        output_z_ack,
        clk,
        rst,
        output_z,
        output_z_stb,
        input_a_ack,
        input_b_ack);

  input     clk;
  input     rst;

  input     [63:0] input_a;
  input     input_a_stb;
  output    input_a_ack;

  input     [63:0] input_b;
  input     input_b_stb;
  output    input_b_ack;

  output    [63:0] output_z;
  output    output_z_stb;
  input     output_z_ack;

  reg       s_output_z_stb;
  reg       [63:0] s_output_z;
  reg       s_input_a_ack;
  reg       s_input_b_ack;

  reg       [3:0] state;
  parameter get_a         = 4'd0,
            get_b         = 4'd1,
            unpack        = 4'd2,
            special_cases = 4'd3,
            normalise_a   = 4'd4,
            normalise_b   = 4'd5,
            multiply_0    = 4'd6,
            multiply_1    = 4'd7,
            normalise_1   = 4'd8,
            normalise_2   = 4'd9,
            round         = 4'd10,
            pack          = 4'd11,
            put_z         = 4'd12;

  reg       [63:0] a, b, z;
  reg       [52:0] a_m, b_m, z_m;
  reg       [12:0] a_e, b_e, z_e;
  reg       a_s, b_s, z_s;
  reg       guard, round_bit, sticky;
  reg       [107:0] product;

  always @(posedge clk)
  begin

    case(state)

      get_a:
      begin
        s_input_a_ack <= 1;
        if (s_input_a_ack && input_a_stb) begin
          a <= input_a;
          s_input_a_ack <= 0;
          state <= get_b;
        end
      end

      get_b:
      begin
        s_input_b_ack <= 1;
        if (s_input_b_ack && input_b_stb) begin
          b <= input_b;
          s_input_b_ack <= 0;
          state <= unpack;
        end
      end

      unpack:
      begin
        a_m <= a[51 : 0];
        b_m <= b[51 : 0];
        a_e <= a[62 : 52] - 1023;
        b_e <= b[62 : 52] - 1023;
        a_s <= a[63];
        b_s <= b[63];
        state <= special_cases;
      end

      special_cases:
      begin
        //if a is NaN or b is NaN return NaN
        if ((a_e == 1024 && a_m != 0) || (b_e == 1024 && b_m != 0)) begin
          z[63] <= 1;
          z[62:52] <= 2047;
          z[51] <= 1;
          z[50:0] <= 0;
          state <= put_z;
        //if a is inf return inf
        end else if (a_e == 1024) begin
          z[63] <= a_s ^ b_s;
          z[62:52] <= 2047;
          z[51:0] <= 0;
          state <= put_z;
           //if b is zero return NaN
          if ($signed(b_e == -1023) && (b_m == 0)) begin
            z[63] <= 1;
            z[62:52] <= 2047;
            z[51] <= 1;
            z[50:0] <= 0;
            state <= put_z;
          end
        //if b is inf return inf
        end else if (b_e == 1024) begin
          z[63] <= a_s ^ b_s;
          z[62:52] <= 2047;
          z[51:0] <= 0;
          state <= put_z;
        //if a is zero return zero
        end else if (($signed(a_e) == -1023) && (a_m == 0)) begin
          z[63] <= a_s ^ b_s;
          z[62:52] <= 0;
          z[51:0] <= 0;
          state <= put_z;
        //if b is zero return zero
        end else if (($signed(b_e) == -1023) && (b_m == 0)) begin
          z[63] <= a_s ^ b_s;
          z[62:52] <= 0;
          z[51:0] <= 0;
          state <= put_z;
        end else begin
          //Denormalised Number
          if ($signed(a_e) == -1023) begin
            a_e <= -1022;
          end else begin
            a_m[52] <= 1;
          end
          //Denormalised Number
          if ($signed(b_e) == -1023) begin
            b_e <= -1022;
          end else begin
            b_m[52] <= 1;
          end
          state <= normalise_a;
        end
      end

      normalise_a:
      begin
        if (a_m[52]) begin
          state <= normalise_b;
        end else begin
          a_m <= a_m << 1;
          a_e <= a_e - 1;
        end
      end

      normalise_b:
      begin
        if (b_m[52]) begin
          state <= multiply_0;
        end else begin
          b_m <= b_m << 1;
          b_e <= b_e - 1;
        end
      end

      multiply_0:
      begin
        z_s <= a_s ^ b_s;
        z_e <= a_e + b_e + 1;
        product <= a_m * b_m * 4;
        state <= multiply_1;
      end

      multiply_1:
      begin
        z_m <= product[107:55];
        guard <= product[54];
        round_bit <= product[53];
        sticky <= (product[52:0] != 0);
        state <= normalise_1;
      end

      normalise_1:
      begin
        if (z_m[52] == 0) begin
          z_e <= z_e - 1;
          z_m <= z_m << 1;
          z_m[0] <= guard;
          guard <= round_bit;
          round_bit <= 0;
        end else begin
          state <= normalise_2;
        end
      end

      normalise_2:
      begin
        if ($signed(z_e) < -1022) begin
          z_e <= z_e + 1;
          z_m <= z_m >> 1;
          guard <= z_m[0];
          round_bit <= guard;
          sticky <= sticky | round_bit;
        end else begin
          state <= round;
        end
      end

      round:
      begin
        if (guard && (round_bit | sticky | z_m[0])) begin
          z_m <= z_m + 1;
          if (z_m == 53'hffffff) begin
            z_e <=z_e + 1;
          end
        end
        state <= pack;
      end

      pack:
      begin
        z[51 : 0] <= z_m[51:0];
        z[62 : 52] <= z_e[11:0] + 1023;
        z[63] <= z_s;
        if ($signed(z_e) == -1022 && z_m[52] == 0) begin
          z[62 : 52] <= 0;
        end
        //if overflow occurs, return inf
        if ($signed(z_e) > 1023) begin
          z[51 : 0] <= 0;
          z[62 : 52] <= 2047;
          z[63] <= z_s;
        end
        state <= put_z;
      end

      put_z:
      begin
        s_output_z_stb <= 1;
        s_output_z <= z;
        if (s_output_z_stb && output_z_ack) begin
          s_output_z_stb <= 0;
          state <= get_a;
        end
      end

    endcase

    if (rst == 1) begin
      state <= get_a;
      s_input_a_ack <= 0;
      s_input_b_ack <= 0;
      s_output_z_stb <= 0;
    end

  end
  assign input_a_ack = s_input_a_ack;
  assign input_b_ack = s_input_b_ack;
  assign output_z_stb = s_output_z_stb;
  assign output_z = s_output_z;

endmodule

//IEEE Floating Point Adder (Double Precision)
//Copyright (C) Jonathan P Dawson 2013
//2013-12-12

module double_adder(
        input_a,
        input_b,
        input_a_stb,
        input_b_stb,
        output_z_ack,
        clk,
        rst,
        output_z,
        output_z_stb,
        input_a_ack,
        input_b_ack);

  input     clk;
  input     rst;

  input     [63:0] input_a;
  input     input_a_stb;
  output    input_a_ack;

  input     [63:0] input_b;
  input     input_b_stb;
  output    input_b_ack;

  output    [63:0] output_z;
  output    output_z_stb;
  input     output_z_ack;

  reg       s_output_z_stb;
  reg       [63:0] s_output_z;
  reg       s_input_a_ack;
  reg       s_input_b_ack;

  reg       [3:0] state;
  parameter get_a         = 4'd0,
            get_b         = 4'd1,
            unpack        = 4'd2,
            special_cases = 4'd3,
            align         = 4'd4,
            add_0         = 4'd5,
            add_1         = 4'd6,
            normalise_1   = 4'd7,
            normalise_2   = 4'd8,
            round         = 4'd9,
            pack          = 4'd10,
            put_z         = 4'd11;

  reg       [63:0] a, b, z;
  reg       [55:0] a_m, b_m;
  reg       [52:0] z_m;
  reg       [12:0] a_e, b_e, z_e;
  reg       a_s, b_s, z_s;
  reg       guard, round_bit, sticky;
  reg       [56:0] sum;

  always @(posedge clk)
  begin

    case(state)

      get_a:
      begin
        s_input_a_ack <= 1;
        if (s_input_a_ack && input_a_stb) begin
          a <= input_a;
          s_input_a_ack <= 0;
          state <= get_b;
        end
      end

      get_b:
      begin
        s_input_b_ack <= 1;
        if (s_input_b_ack && input_b_stb) begin
          b <= input_b;
          s_input_b_ack <= 0;
          state <= unpack;
        end
      end

      unpack:
      begin
        a_m <= {a[51 : 0], 3'd0};
        b_m <= {b[51 : 0], 3'd0};
        a_e <= a[62 : 52] - 1023;
        b_e <= b[62 : 52] - 1023;
        a_s <= a[63];
        b_s <= b[63];
        state <= special_cases;
      end

      special_cases:
      begin
        //if a is NaN or b is NaN return NaN
        if ((a_e == 1024 && a_m != 0) || (b_e == 1024 && b_m != 0)) begin
          z[63] <= 1;
          z[62:52] <= 2047;
          z[51] <= 1;
          z[50:0] <= 0;
          state <= put_z;
        //if a is inf return inf
        end else if (a_e == 1024) begin
          z[63] <= a_s;
          z[62:52] <= 2047;
          z[51:0] <= 0;
          state <= put_z;
        //if b is inf return inf
        end else if (b_e == 1024) begin
          z[63] <= b_s;
          z[62:52] <= 2047;
          z[51:0] <= 0;
          state <= put_z;
        //if a is zero return b
        end else if ((($signed(a_e) == -1023) && (a_m == 0)) && (($signed(b_e) == -1023) && (b_m == 0))) begin
          z[63] <= a_s & b_s;
          z[62:52] <= b_e[10:0] + 1023;
          z[51:0] <= b_m[55:3];
          state <= put_z;
        //if a is zero return b
        end else if (($signed(a_e) == -1023) && (a_m == 0)) begin
          z[63] <= b_s;
          z[62:52] <= b_e[10:0] + 1023;
          z[51:0] <= b_m[55:3];
          state <= put_z;
        //if b is zero return a
        end else if (($signed(b_e) == -1023) && (b_m == 0)) begin
          z[63] <= a_s;
          z[62:52] <= a_e[10:0] + 1023;
          z[51:0] <= a_m[55:3];
          state <= put_z;
        end else begin
          //Denormalised Number
          if ($signed(a_e) == -1023) begin
            a_e <= -1022;
          end else begin
            a_m[55] <= 1;
          end
          //Denormalised Number
          if ($signed(b_e) == -1023) begin
            b_e <= -1022;
          end else begin
            b_m[55] <= 1;
          end
          state <= align;
        end
      end

      align:
      begin
        if ($signed(a_e) > $signed(b_e)) begin
          b_e <= b_e + 1;
          b_m <= b_m >> 1;
          b_m[0] <= b_m[0] | b_m[1];
        end else if ($signed(a_e) < $signed(b_e)) begin
          a_e <= a_e + 1;
          a_m <= a_m >> 1;
          a_m[0] <= a_m[0] | a_m[1];
        end else begin
          state <= add_0;
        end
      end

      add_0:
      begin
        z_e <= a_e;
        if (a_s == b_s) begin
          sum <= {1'd0, a_m} + b_m;
          z_s <= a_s;
        end else begin
          if (a_m > b_m) begin
            sum <= {1'd0, a_m} - b_m;
            z_s <= a_s;
          end else begin
            sum <= {1'd0, b_m} - a_m;
            z_s <= b_s;
          end
        end
        state <= add_1;
      end

      add_1:
      begin
        if (sum[56]) begin
          z_m <= sum[56:4];
          guard <= sum[3];
          round_bit <= sum[2];
          sticky <= sum[1] | sum[0];
          z_e <= z_e + 1;
        end else begin
          z_m <= sum[55:3];
          guard <= sum[2];
          round_bit <= sum[1];
          sticky <= sum[0];
        end
        state <= normalise_1;
      end

      normalise_1:
      begin
        if (z_m[52] == 0 && $signed(z_e) > -1022) begin
          z_e <= z_e - 1;
          z_m <= z_m << 1;
          z_m[0] <= guard;
          guard <= round_bit;
          round_bit <= 0;
        end else begin
          state <= normalise_2;
        end
      end

      normalise_2:
      begin
        if ($signed(z_e) < -1022) begin
          z_e <= z_e + 1;
          z_m <= z_m >> 1;
          guard <= z_m[0];
          round_bit <= guard;
          sticky <= sticky | round_bit;
        end else begin
          state <= round;
        end
      end

      round:
      begin
        if (guard && (round_bit | sticky | z_m[0])) begin
          z_m <= z_m + 1;
          if (z_m == 53'h1fffffffffffff) begin
            z_e <=z_e + 1;
          end
        end
        state <= pack;
      end

      pack:
      begin
        z[51 : 0] <= z_m[51:0];
        z[62 : 52] <= z_e[10:0] + 1023;
        z[63] <= z_s;
        if ($signed(z_e) == -1022 && z_m[52] == 0) begin
          z[62 : 52] <= 0;
        end
        //if overflow occurs, return inf
        if ($signed(z_e) > 1023) begin
          z[51 : 0] <= 0;
          z[62 : 52] <= 2047;
          z[63] <= z_s;
        end
        state <= put_z;
      end

      put_z:
      begin
        s_output_z_stb <= 1;
        s_output_z <= z;
        if (s_output_z_stb && output_z_ack) begin
          s_output_z_stb <= 0;
          state <= get_a;
        end
      end

    endcase

    if (rst == 1) begin
      state <= get_a;
      s_input_a_ack <= 0;
      s_input_b_ack <= 0;
      s_output_z_stb <= 0;
    end

  end
  assign input_a_ack = s_input_a_ack;
  assign input_b_ack = s_input_b_ack;
  assign output_z_stb = s_output_z_stb;
  assign output_z = s_output_z;

endmodule

//Integer to IEEE Floating Point Converter (Single Precision)
//Copyright (C) Jonathan P Dawson 2013
//2013-12-12
module int_to_float(
        input_a,
        input_a_stb,
        output_z_ack,
        clk,
        rst,
        output_z,
        output_z_stb,
        input_a_ack);

  input     clk;
  input     rst;

  input     [31:0] input_a;
  input     input_a_stb;
  output    input_a_ack;

  output    [31:0] output_z;
  output    output_z_stb;
  input     output_z_ack;

  reg       s_output_z_stb;
  reg       [31:0] s_output_z;
  reg       s_input_a_ack;
  reg       s_input_b_ack;

  reg       [2:0] state;
  parameter get_a         = 3'd0,
            convert_0     = 3'd1,
            convert_1     = 3'd2,
            convert_2     = 3'd3,
            round         = 3'd4,
            pack          = 3'd5,
            put_z         = 3'd6;

  reg [31:0] a, z, value;
  reg [23:0] z_m;
  reg [7:0] z_r;
  reg [7:0] z_e;
  reg z_s;
  reg guard, round_bit, sticky;

  always @(posedge clk)
  begin

    case(state)

      get_a:
      begin
        s_input_a_ack <= 1;
        if (s_input_a_ack && input_a_stb) begin
          a <= input_a;
          s_input_a_ack <= 0;
          state <= convert_0;
        end
      end

      convert_0:
      begin
        if ( a == 0 ) begin
          z_s <= 0;
          z_m <= 0;
          z_e <= -127;
          state <= pack;
        end else begin
          value <= a[31] ? -a : a;
          z_s <= a[31];
          state <= convert_1;
        end
      end

      convert_1:
      begin
        z_e <= 31;
        z_m <= value[31:8];
        z_r <= value[7:0];
        state <= convert_2;
      end

      convert_2:
      begin
        if (!z_m[23]) begin
          z_e <= z_e - 1;
          z_m <= z_m << 1;
          z_m[0] <= z_r[7];
          z_r <= z_r << 1;
        end else begin
          guard <= z_r[7];
          round_bit <= z_r[6];
          sticky <= z_r[5:0] != 0;
          state <= round;
        end
      end

      round:
      begin
        if (guard && (round_bit || sticky || z_m[0])) begin
          z_m <= z_m + 1;
          if (z_m == 24'hffffff) begin
            z_e <=z_e + 1;
          end
        end
        state <= pack;
      end

      pack:
      begin
        z[22 : 0] <= z_m[22:0];
        z[30 : 23] <= z_e + 127;
        z[31] <= z_s;
        state <= put_z;
      end

      put_z:
      begin
        s_output_z_stb <= 1;
        s_output_z <= z;
        if (s_output_z_stb && output_z_ack) begin
          s_output_z_stb <= 0;
          state <= get_a;
        end
      end

    endcase

    if (rst == 1) begin
      state <= get_a;
      s_input_a_ack <= 0;
      s_output_z_stb <= 0;
    end

  end
  assign input_a_ack = s_input_a_ack;
  assign output_z_stb = s_output_z_stb;
  assign output_z = s_output_z;

endmodule

//IEEE Floating Point to Integer Converter (Single Precision)
//Copyright (C) Jonathan P Dawson 2013
//2013-12-12
module float_to_int(
        input_a,
        input_a_stb,
        output_z_ack,
        clk,
        rst,
        output_z,
        output_z_stb,
        input_a_ack);

  input     clk;
  input     rst;

  input     [31:0] input_a;
  input     input_a_stb;
  output    input_a_ack;

  output    [31:0] output_z;
  output    output_z_stb;
  input     output_z_ack;

  reg       s_output_z_stb;
  reg       [31:0] s_output_z;
  reg       s_input_a_ack;

  reg       [2:0] state;
  parameter get_a         = 3'd0,
            special_cases = 3'd1,
            unpack        = 3'd2,
            convert       = 3'd3,
            put_z         = 3'd4;

  reg [31:0] a_m, a, z;
  reg [8:0] a_e;
  reg a_s;

  always @(posedge clk)
  begin

    case(state)

      get_a:
      begin
        s_input_a_ack <= 1;
        if (s_input_a_ack && input_a_stb) begin
          a <= input_a;
          s_input_a_ack <= 0;
          state <= unpack;
        end
      end

      unpack:
      begin
        a_m[31:8] <= {1'b1, a[22 : 0]};
        a_m[7:0] <= 0;
        a_e <= a[30 : 23] - 127;
        a_s <= a[31];
        state <= special_cases;
      end

      special_cases:
      begin
        if ($signed(a_e) == -127) begin
          z <= 0;
          state <= put_z;
        end else if ($signed(a_e) > 31) begin
          z <= 32'h80000000;
          state <= put_z;
        end else begin
          state <= convert;
        end
      end

      convert:
      begin
        if ($signed(a_e) < 31 && a_m) begin
          a_e <= a_e + 1;
          a_m <= a_m >> 1;
        end else begin
          if (a_m[31]) begin
            z <= 32'h80000000;
          end else begin
            z <= a_s ? -a_m : a_m;
          end
          state <= put_z;
        end
      end

      put_z:
      begin
        s_output_z_stb <= 1;
        s_output_z <= z;
        if (s_output_z_stb && output_z_ack) begin
          s_output_z_stb <= 0;
          state <= get_a;
        end
      end

    endcase

    if (rst == 1) begin
      state <= get_a;
      s_input_a_ack <= 0;
      s_output_z_stb <= 0;
    end

  end
  assign input_a_ack = s_input_a_ack;
  assign output_z_stb = s_output_z_stb;
  assign output_z = s_output_z;

endmodule

//Integer to IEEE Floating Point Converter (Double Precision)
//Copyright (C) Jonathan P Dawson 2013
//2013-12-12
module long_to_double(
        input_a,
        input_a_stb,
        output_z_ack,
        clk,
        rst,
        output_z,
        output_z_stb,
        input_a_ack);

  input     clk;
  input     rst;

  input     [63:0] input_a;
  input     input_a_stb;
  output    input_a_ack;

  output    [63:0] output_z;
  output    output_z_stb;
  input     output_z_ack;

  reg       s_output_z_stb;
  reg       [63:0] s_output_z;
  reg       s_input_a_ack;
  reg       s_input_b_ack;

  reg       [2:0] state;
  parameter get_a         = 3'd0,
            convert_0     = 3'd1,
            convert_1     = 3'd2,
            convert_2     = 3'd3,
            round         = 3'd4,
            pack          = 3'd5,
            put_z         = 3'd6;

  reg [63:0] a, z, value;
  reg [52:0] z_m;
  reg [10:0] z_r;
  reg [10:0] z_e;
  reg z_s;
  reg guard, round_bit, sticky;

  always @(posedge clk)
  begin

    case(state)

      get_a:
      begin
        s_input_a_ack <= 1;
        if (s_input_a_ack && input_a_stb) begin
          a <= input_a;
          s_input_a_ack <= 0;
          state <= convert_0;
        end
      end

      convert_0:
      begin
        if ( a == 0 ) begin
          z_s <= 0;
          z_m <= 0;
          z_e <= -1023;
          state <= pack;
        end else begin
          value <= a[63] ? -a : a;
          z_s <= a[63];
          state <= convert_1;
        end
      end

      convert_1:
      begin
        z_e <= 63;
        z_m <= value[63:11];
        z_r <= value[10:0];
        state <= convert_2;
      end

      convert_2:
      begin
        if (!z_m[52]) begin
          z_e <= z_e - 1;
          z_m <= z_m << 1;
          z_m[0] <= z_r[10];
          z_r <= z_r << 1;
        end else begin
          guard <= z_r[10];
          round_bit <= z_r[9];
          sticky <= z_r[8:0] != 0;
          state <= round;
        end
      end

      round:
      begin
        if (guard && (round_bit || sticky || z_m[0])) begin
          z_m <= z_m + 1;
          if (z_m == 53'h1fffffffffffff) begin
            z_e <=z_e + 1;
          end
        end
        state <= pack;
      end

      pack:
      begin
        z[51 : 0] <= z_m[51:0];
        z[62 : 52] <= z_e + 1023;
        z[63] <= z_s;
        state <= put_z;
      end

      put_z:
      begin
        s_output_z_stb <= 1;
        s_output_z <= z;
        if (s_output_z_stb && output_z_ack) begin
          s_output_z_stb <= 0;
          state <= get_a;
        end
      end

    endcase

    if (rst == 1) begin
      state <= get_a;
      s_input_a_ack <= 0;
      s_output_z_stb <= 0;
    end

  end
  assign input_a_ack = s_input_a_ack;
  assign output_z_stb = s_output_z_stb;
  assign output_z = s_output_z;

endmodule

//IEEE Floating Point to Integer Converter (Double Precision)
//Copyright (C) Jonathan P Dawson 2014
//2014-01-11
module double_to_long(
        input_a,
        input_a_stb,
        output_z_ack,
        clk,
        rst,
        output_z,
        output_z_stb,
        input_a_ack);

  input     clk;
  input     rst;

  input     [63:0] input_a;
  input     input_a_stb;
  output    input_a_ack;

  output    [63:0] output_z;
  output    output_z_stb;
  input     output_z_ack;

  reg       s_output_z_stb;
  reg       [63:0] s_output_z;
  reg       s_input_a_ack;

  reg       [2:0] state;
  parameter get_a         = 3'd0,
            special_cases = 3'd1,
            unpack        = 3'd2,
            convert       = 3'd3,
            put_z         = 3'd4;

  reg [63:0] a_m, a, z;
  reg [11:0] a_e;
  reg a_s;

  always @(posedge clk)
  begin

    case(state)

      get_a:
      begin
        s_input_a_ack <= 1;
        if (s_input_a_ack && input_a_stb) begin
          a <= input_a;
          s_input_a_ack <= 0;
          state <= unpack;
        end
      end

      unpack:
      begin
        a_m[63:11] <= {1'b1, a[51 : 0]};
        a_m[10:0] <= 0;
        a_e <= a[62 : 52] - 1023;
        a_s <= a[63];
        state <= special_cases;
      end

      special_cases:
      begin
        if ($signed(a_e) == -1023) begin
          //zero
          z <= 0;
          state <= put_z;
        end else if ($signed(a_e) == 1024 && a[51:0] != 0) begin
          //nan
          z <= 64'h8000000000000000;
          state <= put_z;
        end else if ($signed(a_e) > 63) begin
          //too big
          if (a_s) begin
              z <= 64'h8000000000000000;
          end else begin
              z <= 64'h0000000000000000;
          end
          state <= put_z;
        end else begin
          state <= convert;
        end
      end

      convert:
      begin
        if ($signed(a_e) < 63 && a_m) begin
          a_e <= a_e + 1;
          a_m <= a_m >> 1;
        end else begin
          if (a_m[63] && a_s) begin
            z <= 64'h8000000000000000;
          end else begin
            z <= a_s ? -a_m : a_m;
          end
          state <= put_z;
        end
      end

      put_z:
      begin
        s_output_z_stb <= 1;
        s_output_z <= z;
        if (s_output_z_stb && output_z_ack) begin
          s_output_z_stb <= 0;
          state <= get_a;
        end
      end

    endcase

    if (rst == 1) begin
      state <= get_a;
      s_input_a_ack <= 0;
      s_output_z_stb <= 0;
    end

  end
  assign input_a_ack = s_input_a_ack;
  assign output_z_stb = s_output_z_stb;
  assign output_z = s_output_z;

endmodule

//Integer to IEEE Floating Point Converter (Double Precision)
//Copyright (C) Jonathan P Dawson 2013
//2013-12-12
module float_to_double(
        input_a,
        input_a_stb,
        output_z_ack,
        clk,
        rst,
        output_z,
        output_z_stb,
        input_a_ack);

  input     clk;
  input     rst;

  input     [31:0] input_a;
  input     input_a_stb;
  output    input_a_ack;

  output    [63:0] output_z;
  output    output_z_stb;
  input     output_z_ack;

  reg       s_output_z_stb;
  reg       [63:0] s_output_z;
  reg       s_input_a_ack;
  reg       s_input_b_ack;

  reg       [1:0] state;
  parameter get_a         = 3'd0,
            convert_0     = 3'd1,
            normalise_0   = 3'd2,
            put_z         = 3'd3;

  reg [63:0] z;
  reg [10:0] z_e;
  reg [52:0] z_m;
  reg [31:0] a;

  always @(posedge clk)
  begin

    case(state)

      get_a:
      begin
        s_input_a_ack <= 1;
        if (s_input_a_ack && input_a_stb) begin
          a <= input_a;
          s_input_a_ack <= 0;
          state <= convert_0;
        end
      end

      convert_0:
      begin
        z[63] <= a[31];
        z[62:52] <= (a[30:23] - 127) + 1023;
        z[51:0] <= {a[22:0], 29'd0};
        if (a[30:23] == 255) begin
            z[62:52] <= 2047;
        end
        state <= put_z;
        if (a[30:23] == 0) begin
            if (a[23:0]) begin
                state <= normalise_0;
                z_e <= 897;
                z_m <= {1'd0, a[22:0], 29'd0};
            end
            z[62:52] <= 0;
        end
      end

      normalise_0:
      begin
        if (z_m[52]) begin
          z[62:52] <= z_e;
          z[51:0] <= z_m[51:0];
          state <= put_z;
        end else begin
          z_m <= {z_m[51:0], 1'd0};
          z_e <= z_e - 1;
        end
      end

      put_z:
      begin
        s_output_z_stb <= 1;
        s_output_z <= z;
        if (s_output_z_stb && output_z_ack) begin
          s_output_z_stb <= 0;
          state <= get_a;
        end
      end

    endcase

    if (rst == 1) begin
      state <= get_a;
      s_input_a_ack <= 0;
      s_output_z_stb <= 0;
    end

  end
  assign input_a_ack = s_input_a_ack;
  assign output_z_stb = s_output_z_stb;
  assign output_z = s_output_z;

endmodule

//IEEE Floating Point to Integer Converter (Double Precision)
//Copyright (C) Jonathan P Dawson 2014
//2014-01-11
module double_to_float(
        input_a,
        input_a_stb,
        output_z_ack,
        clk,
        rst,
        output_z,
        output_z_stb,
        input_a_ack);

  input     clk;
  input     rst;

  input     [63:0] input_a;
  input     input_a_stb;
  output    input_a_ack;

  output    [31:0] output_z;
  output    output_z_stb;
  input     output_z_ack;

  reg       s_output_z_stb;
  reg       [31:0] s_output_z;
  reg       s_input_a_ack;

  reg       [1:0] state;
  parameter get_a         = 3'd0,
            unpack        = 3'd1,
            denormalise   = 3'd2,
            put_z         = 3'd3;

  reg [63:0] a;
  reg [31:0] z;
  reg [10:0] z_e;
  reg [23:0] z_m;
  reg guard;
  reg round;
  reg sticky;

  always @(posedge clk)
  begin

    case(state)

      get_a:
      begin
        s_input_a_ack <= 1;
        if (s_input_a_ack && input_a_stb) begin
          a <= input_a;
          s_input_a_ack <= 0;
          state <= unpack;
        end
      end

      unpack:
      begin
        z[31] <= a[63];
        state <= put_z;
        if (a[62:52] == 0) begin
            z[30:23] <= 0;
            z[22:0] <= 0;
        end else if (a[62:52] < 897) begin
            z[30:23] <= 0;
            z_m <= {1'd1, a[51:29]};
            z_e <= a[62:52];
            guard <= a[28];
            round <= a[27];
            sticky <= a[26:0] != 0;
            state <= denormalise;
        end else if (a[62:52] == 2047) begin
            z[30:23] <= 255;
            z[22:0] <= 0;
            if (a[51:0]) begin
                z[22] <= 1;
            end
        end else if (a[62:52] > 1150) begin
            z[30:23] <= 255;
            z[22:0] <= 0;
        end else begin
            z[30:23] <= (a[62:52] - 1023) + 127;
            if (a[28] && (a[27] || a[26:0])) begin
                z[22:0] <= a[51:29] + 1;
            end else begin
                z[22:0] <= a[51:29];
            end
        end
      end

      denormalise:
      begin
        if (z_e == 897 || (z_m == 0 && guard == 0)) begin
            state <= put_z;
            z[22:0] <= z_m;
            if (guard && (round || sticky)) begin
                z[22:0] <= z_m + 1;
            end
        end else begin
            z_e <= z_e + 1;
            z_m <= {1'd0, z_m[23:1]};
            guard <= z_m[0];
            round <= guard;
            sticky <= sticky | round;
        end
      end

      put_z:
      begin
        s_output_z_stb <= 1;
        s_output_z <= z;
        if (s_output_z_stb && output_z_ack) begin
          s_output_z_stb <= 0;
          state <= get_a;
        end
      end

    endcase

    if (rst == 1) begin
      state <= get_a;
      s_input_a_ack <= 0;
      s_output_z_stb <= 0;
    end

  end
  assign input_a_ack = s_input_a_ack;
  assign output_z_stb = s_output_z_stb;
  assign output_z = s_output_z;

endmodule