Skip to content
Build image, lint, and run tests

Run install_settings script on boot #419

Sign in to view logs

Run install_settings script on boot

Run install_settings script on boot #419

Workflow file for this run

.github/workflows/build.yml at 62eee1c
name: Build image, lint, and run tests
on: [push]
jobs:
build:
runs-on: ubuntu-latest
strategy:
matrix:
python-version: [3.9]
steps:
- uses: actions/checkout@v4
- name: Set up Python ${{ matrix.python-version }}
uses: actions/setup-python@v5
with:
python-version: ${{ matrix.python-version }}
- name: Install Python dependencies
run: |
python -m pip install uv
python -m uv venv
python -m uv pip install .[test]
- name: Lint with ruff
run: |
source .venv/bin/activate
python -m ruff check .
- name: Test with pytest
run: |
source .venv/bin/activate
python -m pytest
build_image:
runs-on: ubuntu-latest
steps:
- uses: pguyot/arm-runner-action@v2
id: build_image
with:
base_image: https://downloads.raspberrypi.com/raspios_armhf/images/raspios_armhf-2024-03-15/2024-03-15-raspios-bookworm-armhf.img.xz
bootpartition: 1
rootpartition: 2
image_additional_mb: 4000
commands: |
echo "Updating!"
sudo apt update
echo "Installing dependencies!"
sudo apt install -y git firefox-esr xvfb portaudio19-dev libatlas-base-dev redis-server espeak rustc python3-dev libopenblas-dev
echo "Installing Go Note Go!"
mkdir -p /home/pi/code/github/dbieber
cd /home/pi/code/github/dbieber
git clone https://github.com/dbieber/GoNoteGo.git
cd GoNoteGo
# Checkout the specific commit
git checkout $GITHUB_SHA
echo "Setting up Python environment"
python3 -m venv env
./env/bin/pip install -e . # Install Python dependencies
echo "Start on boot"
sudo cat /etc/rc.local
sudo sed '/^exit 0/i \
bash /home/pi/code/github/dbieber/GoNoteGo/scripts/install_settings.sh
/home/pi/code/github/dbieber/GoNoteGo/env/bin/supervisord -c /home/pi/code/github/dbieber/GoNoteGo/gonotego/supervisord.conf
' /etc/rc.local > ./rc.local.modified && mv ./rc.local.modified /etc/rc.local
echo "Setting up Go Note Go:"
cp gonotego/settings/secure_settings_template.py gonotego/settings/secure_settings.py
echo "Manually edit secure_settings.py to configure your settings."
mkdir /home/pi/secrets
echo "Manually transfer secrets to /home/pi/secrets."
echo "Install geckodriver to known location"
cd
wget https://github.com/mozilla/geckodriver/releases/download/v0.23.0/geckodriver-v0.23.0-arm7hf.tar.gz
tar -xvf geckodriver-v0.23.0-arm7hf.tar.gz
rm geckodriver-v0.23.0-arm7hf.tar.gz
sudo mv geckodriver /usr/local/bin
echo "Set up a wifi access point"
sudo apt install -y rng-tools hostapd dnsmasq
cat <<EOF > /etc/dhcpcd.conf
# Allow users of this group to interact with dhcpcd via the control socket.
#controlgroup wheel
# Inform the DHCP server of our hostname for DDNS.
hostname
# Use the hardware address of the interface for the Client ID.
clientid
# or
# Use the same DUID + IAID as set in DHCPv6 for DHCPv4 ClientID as per RFC4361.
# Some non-RFC compliant DHCP servers do not reply with this set.
# In this case, comment out duid and enable clientid above.
#duid
# Persist interface configuration when dhcpcd exits.
persistent
# Rapid commit support.
# Safe to enable by default because it requires the equivalent option set
# on the server to actually work.
option rapid_commit
# A list of options to request from the DHCP server.
option domain_name_servers, domain_name, domain_search, host_name
option classless_static_routes
# Respect the network MTU. This is applied to DHCP routes.
option interface_mtu
# Most distributions have NTP support.
#option ntp_servers
# A ServerID is required by RFC2131.
require dhcp_server_identifier
# Generate SLAAC address using the Hardware Address of the interface
#slaac hwaddr
# OR generate Stable Private IPv6 Addresses based from the DUID
slaac private
# Example static IP configuration:
#interface eth0
#static ip_address=192.168.0.10/24
#static ip6_address=fd51:42f8:caae:d92e::ff/64
#static routers=192.168.0.1
#static domain_name_servers=192.168.0.1 8.8.8.8 fd51:42f8:caae:d92e::1
# It is possible to fall back to a static IP if DHCP fails:
# define static profile
#profile static_eth0
#static ip_address=192.168.1.23/24
#static routers=192.168.1.1
#static domain_name_servers=192.168.1.1
# fallback to static profile on eth0
#interface eth0
#fallback static_eth0
# Interface for Go Note Go Access Point
interface uap0
static ip_address=192.168.4.1/24
nohook wpa_supplicant
EOF
cat <<EOF >> /etc/dnsmasq.conf
interface=uap0
dhcp-range=192.168.4.2,192.168.4.20,255.255.255.0,24h
EOF
cat <<EOF >> /etc/systemd/system/uap0.service
[Unit]
Description=Create uap0 interface
After=sys-subsystem-net-devices-wlan0.device
[Service]
Type=oneshot
RemainAfterExit=true
ExecStart=/sbin/iw phy phy0 interface add uap0 type __ap
ExecStartPost=/usr/bin/ip link set dev uap0 address d8:3a:dd:06:5e:ca
ExecStartPost=/sbin/ifconfig uap0 up
ExecStop=/sbin/iw dev uap0 del
[Install]
WantedBy=multi-user.target
EOF
sudo systemctl daemon-reload
sudo systemctl start uap0.service
sudo systemctl enable uap0.service
cat <<EOF >> /etc/hostapd/hostapd.conf
interface=uap0
ssid=GoNoteGo-Wifi
hw_mode=g
channel=4
wmm_enabled=0
macaddr_acl=0
auth_algs=1
ignore_broadcast_ssid=0
wpa=2
wpa_passphrase=swingset
wpa_key_mgmt=WPA-PSK
wpa_pairwise=TKIP
rsn_pairwise=CCMP
EOF
cat <<EOF >> /etc/default/hostapd
DAEMON_CONF="/etc/hostapd/hostapd.conf"
EOF
sudo systemctl start hostapd
sudo systemctl start dnsmasq
sudo systemctl enable hostapd
sudo systemctl enable dnsmasq
cat <<EOF >> /etc/sysctl.conf
net.ipv4.ip_forward=1
EOF
# Attempt to not run config on first boot
sudo apt purge piwiz -y
sudo raspi-config nonint do_wifi_country US
touch /boot/ssh
echo "pi:$(echo 'raspberry' | openssl passwd -6 -stdin)" | sudo tee /boot/userconf > /dev/null
# Enable ssh
ssh-keygen -A &&
update-rc.d ssh enable
# Add commands to the bash history for debugging purposes
cat << EOF >> /home/pi/.bash_history
sudo reboot now
sudo systemctl daemon-reload
sudo systemctl status uap0.service
sudo systemctl status dnsmasq.service
sudo systemctl status hostapd.service
sudo journalctl -u uap0.service
sudo journalctl -u dnsmasq.service
sudo journalctl -u hostapd.service
ip addr show uap0
cat /etc/rc.local
cat /etc/default/hostapd
cat /etc/hostapd/hostapd.conf
cat /etc/systemd/system/uap0.service
cat /etc/sysctl.conf
cat /etc/dhcpcd.conf
cat /etc/dnsmasq.conf
sudo cat /etc/wpa_supplicant/wpa_supplicant.conf
sudo nano /etc/wpa_supplicant/wpa_supplicant.conf
nano /home/pi/code/github/dbieber/GoNoteGo/gonotego/settings/secure_settings.py
/home/pi/code/github/dbieber/GoNoteGo/env/bin/python
/home/pi/code/github/dbieber/GoNoteGo/env/bin/supervisord -c /home/pi/code/github/dbieber/GoNoteGo/gonotego/supervisord.conf
/home/pi/code/github/dbieber/GoNoteGo/env/bin/supervisorctl -u go -p notego status
/home/pi/code/github/dbieber/GoNoteGo/env/bin/supervisorctl -u go -p notego restart all
cd /home/pi/code/github/dbieber/GoNoteGo/
EOF
- name: Compress the release image
run: |
sudo fdisk -l
sudo ls /etc/xdg/autostart/
mv ${{ steps.build_image.outputs.image }} go-note-go.img
xz -0 -T 0 -v go-note-go.img
- name: Upload release image
uses: actions/upload-artifact@v4
with:
name: Release image
path: go-note-go.img.xz