reactor-opensprinkler

OpenSprinkler Controller for Reactor - Multi-Hub Automation.

Installation

OpenSprinkler Controller must be installed separately. Just download all the files from this repo.

Create, if it does not already exist, a directory called ext in your Reactor install directory (so it should be at the same level as config, storage, etc.).

cd /path/to/reactor
mkdir ext

If you are running Reactor in a docker container, the ext directory should be created in the data directory, where your config and storage directories live as indicated above.

Change directory into the new ext directory:

cd ext
mdkir OpenSprinklerController

Copy all the files in the new directory named OpenSprinklerController. Your final path should be /path/to/reactor/ext/OpenSprinklerController. Now you're ready to run your new controller, since no external packages are required.

From here, proceed to Basic Configuration below.

Basic Configuration

In order to use OpenSprinklerController, you have to add an entry for it to the controllers section of your reactor.yaml file.

controllers:
  # Your existing controllers will be below the above line.
  # Add the following after the last "- id" line in this
  # section.
  - id: opensprinkler
    name: OpenSprinkler
    implementation: OpenSprinklerController
    enabled: true
    config:
      # Replace the IP with that of your OpenSprinkler host below.
      host: "192.168.1.41"

      # default hash for opendoor
      password: "a6d82bced638de3def1e9bbb4983225c"

      # MSR MQTT Controller ID for MQTT integration
      #mqtt_controller: mqtt

      # interval for refresh: default 5 secs
      #interval: 5000

      # timeout: default 15 secs
      #timeout: 15000

      # error_interval: default 10 secs
      #error_interval: 10000

      # default_zone_duration: default 60 secs
      #default_zone_duration: 60

      # default_raindelay_duration: default 1 hour
      #default_raindelay_duration: 1

Restart Reactor to make the changes take effect. After that, you should be able to refresh the UI, go the Entities list, clear any existing filters, and choose "OpenSprinkler" from the controllers filter selector. That should then show you two entities: the OpenSprinkler controller system entity, and its default group entity. If you don't see this, check the log for errors.

Capabilities

If MQTT is configured under Open Sprinkler, after a first update from the controller, it will get all the updates via MQTT. It will refresh the status in particular cases (ie when rain delay is triggered).

At the moment, you can:

• operate zones and programs
• enable/disable the controller (via power_switch)
• enable/disable programs and zones
• see rain delay
• set rain delay programmatically (ie: from your own rain sensors/weather station)
• see water level
• see additional sensors status (if present)
• set rain delay to a personalized amount of hours (added in 20221101)
• MQTT support (added in 20221102, needs last version of both MSR and MQTTController)

On my TODO list:

• get programs status in a more reliable way (WIP)
• handle missing actions from irrigation_zone and return to the UI (?)
• move programs from irrigation_zone to a custom capability (?)
• add more custom actions

Support

This is beta software, so expect quirks and bugs. Support is provided via https://smarthome.community/.