Skip to content

Latest commit

 

History

History
173 lines (118 loc) · 5.14 KB

re-installation.md

File metadata and controls

173 lines (118 loc) · 5.14 KB

Re-Installation

This page details steps to take prior to starting new installation, these pages assume that all the NCNs have been deployed (e.g. there is no more PIT node).

Topics

  1. Quiesce compute and application nodes
  2. Disable DHCP service
  3. Set IPMI credentials
  4. Power off booted nodes
  5. Set node BMCs to DHCP
  6. Power off the PIT node
  7. Configure DNS
  8. Check disk space

Quiesce application and compute nodes

NOTE Skip this section if compute nodes and application nodes are not booted.

The application and compute nodes must be shutdown prior to a reinstallation. If they are left on, then they will potentially end up in an undesirable state.

See Shut Down and Power Off Compute and User Access Nodes.

Disable DHCP service

NOTE Skip this section if the CSM install was incomplete or not started.

The DHCP service running in Kubernetes needs to be disabled or it will conflict with the PIT's DHCP services.

(ncn-mw#) Disable cray-dhcp-kea

kubectl scale -n services --replicas=0 deployment cray-dhcp-kea

Set IPMI credentials

The upcoming procedures use ipmitool. Set IPMI credentials for the BMCs of the NCNs.

read -s is used in order to prevent the credentials from being displayed on the screen or recorded in the shell history.

  1. (ncn# or pit#) Set the username and IPMI password:

    username=root
    read -r -s -p "NCN BMC ${username} password: " IPMI_PASSWORD
  2. (ncn# or pit#) Export IPMI_PASSWORD for the -E option to work on ipmitool:

    export IPMI_PASSWORD

Power off booted nodes

NOTE Skip this section if none of the management nodes are booted.

Power each NCN off using ipmitool from ncn-m001 (or the PIT node, if reinstalling an incomplete install).

  1. Get the inventory of BMCs.

    • (pit#) From the PIT:

      readarray -t BMCS < <(conman -q | grep -v m001 | sort -u)
    • (ncn#) From an NCN (e.g. ncn-m001):

      readarray BMCS < <(grep mgmt /etc/hosts | awk '{print $NF}' | grep -v m001 | sort -u)
  2. (ncn# or pit#) Power off NCNs.

    printf "%s\n" ${BMCS[@]} | xargs -t -i ipmitool -I lanplus -U "${username}" -E -H {} power off
  3. (ncn# or pit#) Check the power status to confirm that the nodes have powered off.

    printf "%s\n" ${BMCS[@]} | xargs -t -i ipmitool -I lanplus -U "${username}" -E -H {} power status

Set node BMCs to DHCP

During the install of the management nodes, their BMCs get set to static IP addresses. The installation expects these BMCs to be set back to DHCP before proceeding.

NOTE These steps require that the Set IPMI credentials steps have been performed.

  1. Get the inventory of BMCs.

    • (pit#) From the PIT:

      readarray -t BMCS < <(conman -q | grep -v m001 | sort -u)
    • (ncn#) From an NCN (e.g. ncn-m001):

      readarray BMCS < <(grep mgmt /etc/hosts | awk '{print $NF}' | grep -v m001 | sort -u)
  2. Set the BMCs to DHCP.

    function bmcs_set_dhcp {
       local lan=1
       for bmc in ${BMCS[@]}; do
          # by default the LAN for the BMC is lan channel 1, except on Intel systems.
          if ipmitool -I lanplus -U "${username}" -E -H "${bmc}" lan print 3 2>/dev/null; then
             lan=3
          fi
          printf "Setting %s to DHCP ... " "${bmc}"
          if ipmitool -I lanplus -U "${username}" -E -H "${bmc}" lan set "${lan}" ipsrc dhcp; then
             echo "Done"
          else
             echo "Failed!"
          fi
       done
    }
    bmcs_set_dhcp
  3. Perform a cold reset of any BMCs which are still reachable.

    function bmcs_cold_reset {
      for bmc in ${BMCS[@]}; do
         printf "Setting %s to DHCP ... " "${bmc}"
         if ipmitool -I lanplus -U "${username}" -E -H "${bmc}" mc reset cold; then
            echo "Done"
         else
            echo "Failed!"
         fi
      done
    }
    bmcs_cold_reset

    NOTE As long as every BMC is either not reachable or receives a cold reset, this step is successful.

Power off PIT node

NOTE Skip this step if planning to use this node as a staging area to create the USB LiveCD.

  1. (ncn-m001# or pit#) Shut down the LiveCD or ncn-m001 node.

    poweroff

The process is now done; the NCNs are ready for a new deployment.

Configure DNS

If ncn-m001 is being used to prepare the USB LiveCD, then remove the Kubernetes IP addresses from /etc/resolv.conf and add a valid external DNS server.

Check disk space

If ncn-m001 is being used to prepare the USB LiveCD, then ensure that there is enough free disk space for the CSM tar archive to be downloaded and unpacked.

Next topic

See Boot installation environment.