Skip to content

Hacking the RAVPower Filehub to automate SD card transfers and harddrive backups

License

Notifications You must be signed in to change notification settings

digidem/filehub-config

Repository files navigation

RAVPower Automation

This collection of scripts automate functionality for copying and backing up files using a RAVPower Filehub.

  • Change the default password
  • Block external network access
  • Copy files from SD Card to USB drive automatically
  • Rename & organize files using EXIF data
  • Backup / sync between two USB drives
  • Add a swap file on a USB drive
  • Allow import of ODK Collect data from smart phones over USB
  • Allow import of ODK Collect data from smart phones over wifi

How to hack the Filehub embedded Linux

The RAVPower Filehub runs embedded Linux, which is a cut-down version of Linux with a low memory footprint. Most of the filesystem is read-only apart from the contents of /etc and /tmp, but changes are not persisted across reboots.

The easiest way to "hack" / modify the configuration of the embedded Linux is to create a script EnterRouterMode.sh on an SD card and put the card in the Filehub. The current firmware (2.000.004) will execute a script with this name with root permissions when the SD card is mounted.

The EnterRouterMode.sh script modifies scripts within /etc and persists changes by running /usr/sbin/etc_tools p.

To use, download the EnterRouterMode.sh script, copy it to the top-level folder of an SD card, and insert it into the filehub device.

Building from source

git clone https://github.com/digidem/filehub-config.git
make

Change the default password

The default root password on RAVPower Filehub devices is 20080826. This is available on several online forums. Best change it. You can do this by telnet (username: root password: 20080826):

telnet 10.10.10.254
passwd

or create a file EnterRouterMode.sh on an SD card and insert it into the Filehub:

#!/bin/sh
passwd <<'EOF'
newpassword
newpassword
EOF
/usr/sbin/etc_tools p

Block external network access

By default it is possible to telnet into the Filehub from an external network if you know what you are doing. This script adds iptables rules to /etc/rc.local (source)

Copy files from SD card automatically

The script runs when any USB device is attached. It checks whether an SD card is present, and it looks for an external USB drive (can be a thumb drive or a USB disk drive) with a folder /monitoreo/config which contains an rsync binary built for embedded linux. There is not enough memory on the filehub device to store the rsync binary on the device itself.

The script uses rsync to copy files, which should be resilient to interuption mid-copy and resume where it left off. Source files are removed from the SD card as they are copied to the external drive.

A folder is created for each SD card, identified by a UUID. It would be ideal to use the serial number for an SD card for the UUID, but unfortunately it is not possible to access this. udevadm info -a -p $(udevadm info -q path -n /dev/sda) | grep -m 1 "ATTRS{serial}" | cut -d'"' -f2 returns the serial number for the card reader, rather than the SD card. Instead we generate a UUID using cat /proc/sys/kernel/random/uuid and store that on the SD card. Bear in mind if an SD card is re-formatted in the camera then this UUID will be lost, so the card will appear as a new card next time it is inserted. Using a UUID allows for transfers to be interupted and resumed later.

If more than 9999 photos are taken with a camera, filenames will be reused. Similarly if an SD card is used in a different camera, filenames will be repeated. This would lead to overwriting files if we just stored all photos from each SD card in a single folder. Instead we create a subfolder for each import. Ideally this would be named with the date of the import, but the clock on the RavPower device cannot be relied upon without internet access. Instead we use the date of the most recent photo on the SD Card as the name of the subfolder.

When the SD card or USB drive is removed, we kill the rsync process, otherwise it hangs around.

Backup between two USB hard drives

If a second drive is attached with a folder "Backup" then an automatic backup process will begin. Each backup drive is linked to the original drive via the original drive serial number. e.g. if you have two drives with original files and one backup drive for each, it will not backup to the wrong drive because it will detect the serial. The link is created the first time you create the backup, by writing a file ".backup_id" to the backup folder.

At this stage older versions and deleted files are not kept. The backup drive is an exact mirror of the original drive. Backups are created via rsync with the following command:

rsync -vrm --size-only --delete-during --exclude ".?*" --partial-dir "$partial_dir" --exclude "swapfile" --log-file /tmp/rsync_log "$source_dir"/ "$target_dir"

Comments and suggestions for the rsync options are most welcome!

Swap file

The RavPower Filehub only has 28Mb of memory, and about 2Mb of free memory. Rsync needs around 100 bytes for each file. To avoid out of memory issues we create a 64Mb swapfile on the USB drive when it is connected. This appears to speed up rsync and should avoid memory issues. I have not yet tested with thousands of files.

Renaming with EXIF

I would like photo filenames to be unique, so we can use them as a UUID. The best way would be to read the EXIF capture date, and prepend that to the filename. Although it might be possible to do that with just the file creation date and time. To use EXIF we would need to cross-compile an EXIF utility for the MIPS architecture used in the RavPower.

ODK Collect Imports

We are using ODK Collect for data collection. This Android app stores data in a folder on the phone storage, and allows for sending that info via a multi-part form submission. There are 3 options for getting that data onto the filehub:

  1. Modify the form submission code in ODK collect so that instead of a multipart form upload, it uploads the form as an XML file to the WebDav server on the RavPower. The Ravpower can be configured so that the ODK server address will redirect locally when no internet connection is present.

  2. Write a small CGI script that can run on the RavPower to accept a multi-part form submission (containing form XML and associated media/photos). It would need to rename the files with the form submission UUID. Could face memory and processing speed limitations.

  3. Transfer the data via a USB connection. Android >4.0 only connects via MTP, which varies in implmentation in Android. The best seems to be go-mtpfs which would need to be cross-compiled with GO for MIPS architecture, which seems is possible. All libraries would need to be statically linked. This is potentially the most reliable solution.

About

Hacking the RAVPower Filehub to automate SD card transfers and harddrive backups

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published