problem building pytorch with jetson tx2

[phojjat]

Hello,

make gave me the following error. cmake ../ seemed to have finished fine. I am using jetson TX2 L4T 28.2.0 with Ubuntu 16.04 and CUDA 9.0252

Scanning dependencies of target jetson-reinforcement
[ 40%] Building CXX object CMakeFiles/jetson-reinforcement.dir/c/pyTensor.cpp.o
In file included from /home/nvidia/jetson-reinforcement/c/pyTensor.cpp:6:0:
/home/nvidia/jetson-reinforcement/c/pyTorch.h:14:19: fatal error: TH/TH.h: No such file or directory
compilation terminated.
CMakeFiles/jetson-reinforcement.dir/build.make:69: recipe for target 'CMakeFiles/jetson-reinforcement.dir/c/pyTensor.cpp.o' failed
make[2]: *** [CMakeFiles/jetson-reinforcement.dir/c/pyTensor.cpp.o] Error 1
CMakeFiles/Makefile2:67: recipe for target 'CMakeFiles/jetson-reinforcement.dir/all' failed
make[1]: *** [CMakeFiles/jetson-reinforcement.dir/all] Error 2
Makefile:83: recipe for target 'all' failed
make: *** [all] Error 2

[yonger001]

@phojjat Have u fix the problem? I met the same one, waiting for ur reply!
thank u so much!

[Victorsoukhov]

Have the same problem... Any suggestions?

[T-Si]

Jetson TX1 with JetPack 3.3 and L4T 28.2:

[ 8%] Building NVCC (Device) object CMakeFiles/THC.dir/generated/THC_generated_THCTensorMaskedByte.cu.o
Killed
CMake Error at THC_generated_THCTensorMode.cu.o.cmake:267 (message):
Error generating file
/home/nvidia/jetson-reinforcement/build/pytorch/torch/lib/build/THC/CMakeFiles/THC.dir//./THC_generated_THCTensorMode.cu.o

CMakeFiles/THC.dir/build.make:11356: recipe for target 'CMakeFiles/THC.dir/THC_generated_THCTensorMode.cu.o' failed
make[2]: *** [CMakeFiles/THC.dir/THC_generated_THCTensorMode.cu.o] Error 1
make[2]: *** Waiting for unfinished jobs....
CMakeFiles/Makefile2:67: recipe for target 'CMakeFiles/THC.dir/all' failed
make[1]: *** [CMakeFiles/THC.dir/all] Error 2
Makefile:127: recipe for target 'all' failed
make: *** [all] Error 2

During the build of PyTorch, this is the error that I receive. Looking at the code referenced,

if(CUDA_result)

Since nvcc can sometimes leave half done files make sure that we delete the output file.

cuda_execute_process(
"Removing ${generated_file}"
COMMAND "${CMAKE_COMMAND}" -E remove "${generated_file}"
)
message(FATAL_ERROR "Error generating file ${generated_file}")
else()
...

Is there something I can do to allow PyTorch to continue?
After flashing the TX1, I did install arduino, if that might have caused an issue.

[dusty-nv]

It looks like Linux is killing the compiler because TX1 ran out of memory. Can you try mounting a swap file? https://support.rackspace.com/how-to/create-a-linux-swap-file/

…

________________________________ From: T-Si <notifications@github.com> Sent: Sunday, March 3, 2019 4:22:03 PM To: dusty-nv/jetson-reinforcement Cc: Subscribed Subject: Re: [dusty-nv/jetson-reinforcement] problem building pytorch with jetson tx2 (#31) Jetson TX1 with JetPack 3.3 and L4T 28.2: [ 8%] Building NVCC (Device) object CMakeFiles/THC.dir/generated/THC_generated_THCTensorMaskedByte.cu.o Killed CMake Error at THC_generated_THCTensorMode.cu.o.cmake:267 (message): Error generating file /home/nvidia/jetson-reinforcement/build/pytorch/torch/lib/build/THC/CMakeFiles/THC.dir//./THC_generated_THCTensorMode.cu.o CMakeFiles/THC.dir/build.make:11356: recipe for target 'CMakeFiles/THC.dir/THC_generated_THCTensorMode.cu.o' failed make[2]: *** [CMakeFiles/THC.dir/THC_generated_THCTensorMode.cu.o] Error 1 make[2]: *** Waiting for unfinished jobs.... CMakeFiles/Makefile2:67: recipe for target 'CMakeFiles/THC.dir/all' failed make[1]: *** [CMakeFiles/THC.dir/all] Error 2 Makefile:127: recipe for target 'all' failed make: *** [all] Error 2 During the build of PyTorch, this is the error that I receive. Looking at the code referenced, if(CUDA_result) Since nvcc can sometimes leave half done files make sure that we delete the output file. cuda_execute_process( "Removing ${generated_file}" COMMAND "${CMAKE_COMMAND}" -E remove "${generated_file}" ) message(FATAL_ERROR "Error generating file ${generated_file}") else() ... Is there something I can do to allow PyTorch to continue? After flashing the TX1, I did install arduino, if that might have caused an issue. — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub<#31 (comment)>, or mute the thread<https://github.com/notifications/unsubscribe-auth/AOpDK5lEg4YNxIh25FvQw3FHKGHHw-swks5vTDz7gaJpZM4YAEyD>.

----------------------------------------------------------------------------------- This email message is for the sole use of the intended recipient(s) and may contain confidential information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message. -----------------------------------------------------------------------------------

[qwertypo888]

I am having the same problem on TX2. I tried mounting a swap file following the instruction, but I am still having the same error. Any suggestions? Thanks!
'''
[ 36%] Built target jetson-utils
[ 38%] Building CXX object CMakeFiles/jetson-reinforcement.dir/c/pyTensor.cpp.o
In file included from /home/nvidia/Documents/../jetson-reinforcement/c/pyTensor.cpp:6:0:
/home/nvidia/Documents/../jetson-reinforcement/c/pyTorch.h:14:19: fatal error: TH/TH.h: No such file or directory
compilation terminated.
CMakeFiles/jetson-reinforcement.dir/build.make:251: recipe for target 'CMakeFiles/jetson-reinforcement.dir/c/pyTensor.cpp.o' failed
make[2]: *** [CMakeFiles/jetson-reinforcement.dir/c/pyTensor.cpp.o] Error 1
CMakeFiles/Makefile2:67: recipe for target 'CMakeFiles/jetson-reinforcement.dir/all' failed
make[1]: *** [CMakeFiles/jetson-reinforcement.dir/all] Error 2
Makefile:83: recipe for target 'all' failed
make: *** [all] Error 2
'''

[brunoeducsantos]

I am having the same issue. Anyone sorted out?

[brunoeducsantos]

I guess everyone found the solution , but here it goes:

1. Install pytorch0.3.01 first
2. Move to opt/ dir
3. make on build of project