Skip to content

ebi-gene-expression-group/atlas-web-single-cell

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Single Cell Expression Atlas

Prepare your development environment

TL;DR

./docker/prepare-dev-environment/gradle-cache/run.sh -r -l gradle-cache.log && \
./docker/prepare-dev-environment/volumes/run.sh -r -l volumes.log && \
./docker/prepare-dev-environment/postgres/run.sh -r -l pg-anndata.log && \
./docker/prepare-dev-environment/postgres/run.sh -r -a -l pg-no-anndata.log && \
./docker/prepare-dev-environment/solr/run.sh -r -l solr.log &&
./build-and-deploy-webapp.sh

Point your browser at http://localhost:8080/gxa/sc and voilà!

Requirements

  • Docker v20+ with the Compose plugin
  • 60 GB of available storage for the following Docker volumes:
    • Experiment files
    • Bioentity properties (i.e. gene annotations)
    • PostgreSQL
    • SolrCloud and ZooKeeper
    • Tomcat configuration files

Files written by Solr, PostgreSQL and Tomcat are kept in volumes which will be reused even if the containers are removed (e.g. when running docker compose down). If you want to start afresh each script can remove all volumes if you add the -r option . You can find the volume names used by each service in the volumes section of its Docker Compose YAML file.

The full list of volumes is:

  • scxa_gradle-wrapper-dists
  • scxa_gradle-ro-dep-cache
  • scxa_atlas-data-bioentity-properties
  • scxa_atlas-data-exp
  • scxa_atlas-data-scxa-expdesign
  • scxa_postgres-11-pgdata-18
  • scxa_postgres-11-pgdata-latest
  • scxa_solrcloud-0-data-solr-8.7
  • scxa_solrcloud-1-data-solr-8.7
  • scxa_solrcloud-zookeeper-0-data-solr-8.7
  • scxa_solrcloud-zookeeper-0-datalog-solr-8.7
  • scxa_solrcloud-zookeeper-1-data-solr-8.7
  • scxa_solrcloud-zookeeper-1-datalog-solr-8.7
  • scxa_solrcloud-zookeeper-2-data-solr-8.7
  • scxa_solrcloud-zookeeper-2-datalog-solr-8.7
  • scxa_tomcat-conf

Code

Clone this repository with submodules:

git clone --recurse-submodules https://github.com/ebi-gene-expression-group/atlas-web-single-cell.git

If you have already cloned the project ensure it’s up-to-date:

git pull
git submodule update --remote

Create a Gradle read-only dependency cache

To speed up builds and tests it is strongly encouraged to create a Docker volume to back a Gradle read-only dependency cache.

./docker/prepare-dev-environment/gradle-cache/run.sh -r -l gradle-cache.log

Prepare volumes

In order to run integration tests and a development instance of Single Cell Expression Atlas you will need a few Docker Compose volumes first. They will be populated with data that will be indexed in Solr and Postgres. Single Cell Expression Atlas needs all three of: file bundles in the volumes, Solr collections and Postgres data. This step takes care of the first requirement:

./docker/prepare-dev-environment/volumes/run.sh -r -l volumes.log

You can get detailed information about which volumes are created if you run the script with the -h flag.

This script, unless it’s run with the -r flag, can be interrupted without losing any data. The container mirrors directories via FTP, and can resume after cancellation. It can be re-run to update the data in the volumes should the contents of the source directories change. This is especially useful when experiments are re-analysed/re-annotated, or the bioentity properties directory is updated after a release of Ensembl, WormBase ParaSite, Reactome, Gene Ontoloy, Plant Ontology or InterPro.

PostgreSQL

To enable easy switching between anndata support and earlier versions of the database, the script sets the environment variable SCHEMA_VERSION to either latest or 18 (latest version before anndata was introduced), respectively. The value is appended to the volume name mounted by the Postgres service.

Run the script twice and then choose later the appropriate version:

./docker/prepare-dev-environment/postgres/run.sh -r -l pg-anndata.log       # anndata support
./docker/prepare-dev-environment/postgres/run.sh -a -r -l pg-no-anndata.log  # no anndata support

To run the Postgres service with support for anndata experiments:

SCHEMA_VERSION=latest \
docker compose --env-file ./docker/dev.env \
-f ./docker/docker-compose-postgres.yml \
up

To run the Postgres service without support for anndata experiments:

SCHEMA_VERSION=18 \
docker compose --env-file ./docker/dev.env \
-f ./docker/docker-compose-postgres.yml \
up

Solr

The Solr script can optionally be given a location for the Single Cell Expression Atlas ontology OWL file. Otherwise, it will download the published scatlas.owl file in the EBI SPOT repository. It will also generate an RSA keypair to sign and verify Solr packages that you can keep for reference and to sign other packages (or later versions of BioSolr). Be aware that Solr can store multiple keys, so they are not strictly necessary; it is possible to generate a new keypair and store its public key every time you add a package. Run the script with the -h flag for more details.

./docker/prepare-dev-environment/solr/run.sh -r -l solr.log

You may want to speed up the process by raising the value of the environment variable NUM_DOCS_PER_BATCH (L126 of the run.sh script). On a fairly powerful laptop at the time of
writing
20,000 has been found to be a reliable number via painstaking trail and error, but your mileage may vary. Ensure that there are no errors in the script logs. Some tests may fail due to incomplete annotations; grep for DistributedUpdatesAsyncException in particular, which signals a problem storing the document batch, which in turn stops processing the current file. If found, try again with a lower value for NUM_DOCS_PER_BATCH.

Update test data

Add or change the necessary species names and experiment accessions in the test-data.env file and rebuild the development environment.

Testing

TL;DR

./execute-all-tests.sh 18      # For non-anndata DB
./execute-all-tests.sh latest  # For anndata DB
./execute-single-test.sh TEST_NAME [ 18 ]
./debug-single-test.sh TEST_NAME [ 18 ]
./stop-and-remove-containers.sh

Execute all tests

The scxa-gradle service in docker/docker-compose-gradle.yml executes all tests and writes reports to atlas-web-core/build and app/build in the host machine. It requires the SolrCloud service described earlier, and a Postgres container with the following differences compared to the development service, scxa-postgres: it doesn’t use named volumes to ensure the database is clean before running any tests, and its name (as well as the dependency declared in docker-compose-gradle.yml) has been changed to scxa-postgres-test. We don’t want to use scxa-postgres by mistake and wipe the tables from the dev instance when cleaning fixtures... such an unfortunate accident is known to have happened.

The job is split in the following six phases:

  1. Clean build directory
  2. Compile test classes
  3. Run unit tests
  4. Run integration tests
  5. Run end-to-end tests
  6. Generate JaCoCo reports

You should specify which SCHEMA_VERSION you want to test against (i.e. anndata or non-anndata database, see the PostgreSQL section above).

For non-anndata:

SCHEMA_VERSION=18 \
docker compose \
--env-file ./docker/dev.env \
-f ./docker/docker-compose-gradle.yml \
-f ./docker/docker-compose-postgres-test.yml \
-f ./docker/docker-compose-solrcloud.yml \
up

For anndata:

SCHEMA_VERSION=latest \
docker compose \
--env-file ./docker/dev.env \
-f ./docker/docker-compose-gradle.yml \
-f ./docker/docker-compose-postgres-test.yml \
-f ./docker/docker-compose-solrcloud.yml \
up

You will eventually see these log messages:

scxa-gradle         | BUILD SUCCESSFUL in 2s
scxa-gradle         | 3 actionable tasks: 1 executed, 2 up-to-date
scxa-gradle exited with code 0

Press Ctrl+C to stop the container and clean any leftovers:

SCHEMA_VERSION=18 \
docker compose \
--env-file ./docker/dev.env \
-f ./docker/docker-compose-gradle.yml \
-f ./docker/docker-compose-postgres-test.yml \
-f ./docker/docker-compose-solrcloud.yml \
down

Or run ./stop-and-remove-containers.sh.

You will find very convenient to use the script execute-all-tests.sh. By default, it runs the anndata database, but the schema version can be provided as an argument. E.g.:

./execute-all-tests.sh [ 18 ]

The script uses docker compose run, and control returns to your shell once the tasks have finished.

Execute a single test

Many times you will find yourself working in a specific test case or class. Running all tests in such cases is impractical. In such situations you can use Gradle’s continuous build execution. See the example below for e.g. ExperimentFileLocationServiceIT.java:

docker compose \
--env-file ./docker/dev.env \
-f ./docker/docker-compose-gradle.yml \
-f ./docker/docker-compose-postgres-test.yml \
-f ./docker/docker-compose-solrcloud.yml \
run --rm --service-ports \
scxa-gradle bash -c '
./gradlew :app:clean &&
./gradlew \
-PdataFilesLocation=/atlas-data \
-PexperimentFilesLocation=/atlas-data/scxa \
-PexperimentDesignLocation=/atlas-data/expdesign \
-PjdbcUrl=jdbc:postgresql://${POSTGRES_HOST}:5432/${POSTGRES_DB} \
-PjdbcUsername=${POSTGRES_USER} \
-PjdbcPassword=${POSTGRES_PASSWORD} \
-PzkHosts=${SOLR_CLOUD_ZK_CONTAINER_1_NAME}:2181,${SOLR_CLOUD_ZK_CONTAINER_2_NAME}:2181,${SOLR_CLOUD_ZK_CONTAINER_3_NAME}:2181 \
-PsolrHosts=http://${SOLR_CLOUD_CONTAINER_1_NAME}:8983/solr,http://${SOLR_CLOUD_CONTAINER_2_NAME}:8983/solr \
app:testClasses &&
./gradlew --continuous :app:test --tests ExperimentFileLocationServiceIT
'

After running the test Gradle stays idle and waits for any changes in the code. When it detects that the files in your project have been updated it will recompile them and run the specified test again. Notice that you can specify multiple test files after --tests (by name or with wildcards).

Again, a convenience script can be used:

./execute-single-test.sh TEST_NAME [ 18 ]

The second argument is optional and can be used to specify a database version. As before, if unspecified it defaults to latest.

Debug tests

If you want to use a debugger, add the option -PremoteDebug to the task test line. For instance:

./gradlew -PremoteDebug :app:test --tests CellPlotDaoIT

Be aware that Gradle won’t execute the tests until you attach a remote debugger to port 5005. It will notify you when it’s ready with the following message:

> Task :app:test
Listening for transport dt_socket at address: 5005
<===========--> 90% EXECUTING [5s]
> IDLE
> IDLE
> IDLE
> IDLE
> IDLE
> IDLE
> IDLE
> :app:test > 0 tests completed
> IDLE
> IDLE
> IDLE
> IDLE

You can combine --continuous with -PremoteDebug, but the debugger will be disconnected at the end of the test. You will need to start and attach the remote debugger every time Gradle compiles and runs the specified test.

The script debug-single-test.sh is a shortcut for this task. It takes the same arguments as executing a single test.

Run web application

The web application is compiled in two stages:

  1. Front end JavaScript packages are transpiled into “bundles” with Webpack
  2. Bundles and back end Java code are built as a WAR file

Lastly, Tomcat deploys the WAR file according to app/src/main/webapp/META-INF/context.xml; other Java EE web servers might work but no testing has been carried out in this regard.

For the first step you can run the following script:

 ./compile-front-end-packages.sh -iu

The sceond step is simply:

./gradlew :app:war

The script build-and-deploy-webapp.sh puts it altogether and will eventually launch a Tomcat container with a running dev instance of Single Cell Expression Atlas. The script before launching the web application can build only the back-end or front-end component or both.

Here is the usage of this script:

  • -f Use this flag if you would like to build the front-end javascript packages.
  • -b Use this flag if you would like to build the back-end of the web application.
  • -h Displaying the help file of this script.

If you don't give any flags, or you add both then the script is going to build both front and back-end part of the web application.

Gradle shell

It also creates a service with one Gradle container that you can attach to your terminal:

docker attach scxa-gradle-shell-1

You can run tests within and any Gradle task in that container (a running Gradle daemon is provided). Every time you re-run the war task (e.g. in the Gradle shell container) the web app will be automatically re-deployed by Tomcat.

You can also set a Docker Compose Run configuration in IntelliJ IDEA with SCHEMA_VERSION in environment variables and dev.env in environment files.