debianx64-installer.sh

#!/bin/bash

red='\033[0;31m'
green='\033[0;32m'
yellow='\033[0;33m'
plain='\033[0m'

cur_dir=$(pwd)

# check root
[[ $EUID -ne 0 ]] && echo -e "${red}mistake：${plain} This script must be run with the root user！\n" && exit 1

# check os
if [[ -f /etc/redhat-release ]]; then
  release="centos"
elif cat /etc/issue | grep -Eqi "debian"; then
  release="debian"
elif cat /etc/issue | grep -Eqi "ubuntu"; then
  release="ubuntu"
elif cat /etc/issue | grep -Eqi "centos|red hat|redhat"; then
  release="centos"
elif cat /proc/version | grep -Eqi "debian"; then
  release="debian"
elif cat /proc/version | grep -Eqi "ubuntu"; then
  release="ubuntu"
elif cat /proc/version | grep -Eqi "centos|red hat|redhat"; then
  release="centos"
else
  echo -e "${red}System version not detected, please contact the script author! Prof.Shafiei@gmail.com ${plain}\n" && exit 1
fi

arch=$(arch)

if [[ $arch == "x86_64" || $arch == "x64" || $arch == "amd64" ]]; then
  arch="amd64"
elif [[ $arch == "aarch64" || $arch == "arm64" ]]; then
  arch="arm64"
elif [[ $arch == "s390x" ]]; then
  arch="s390x"
else
  arch="amd64"
  echo -e "${red}Detect schema failed, use default schema:${arch}${plain}"
fi

echo "Architecture: ${arch}"

if [ $(getconf WORD_BIT) != '32' ] && [ $(getconf LONG_BIT) != '64' ]; then
  echo "This software does not support 32-bit system (x86), please use 64-bit system (x86_64), if the detection is wrong, please contact the:  Prof.Shafiei@Gmail.com"
  exit -1
fi

os_version=""

# os version
if [[ -f /etc/os-release ]]; then
  os_version=$(awk -F'[= ."]' '/VERSION_ID/{print $3}' /etc/os-release)
fi
if [[ -z "$os_version" && -f /etc/lsb-release ]]; then
  os_version=$(awk -F'[= ."]+' '/DISTRIB_RELEASE/{print $2}' /etc/lsb-release)
fi

if [[ x"${release}" == x"centos" ]]; then
  if [[ ${os_version} -le 6 ]]; then
    echo -e "${red}please use CentOS 7 or later system！${plain}\n" && exit 1
  fi
elif [[ x"${release}" == x"ubuntu" ]]; then
  if [[ ${os_version} -lt 16 ]]; then
    echo -e "${red}please use Ubuntu 16 or later system！${plain}\n" && exit 1
  fi
elif [[ x"${release}" == x"debian" ]]; then
  if [[ ${os_version} -lt 8 ]]; then
    echo -e "${red}please use Debian 8 or later system！${plain}\n" && exit 1
  fi
fi

install_base() {
  if [[ x"${release}" == x"centos" ]]; then
    yum install wget curl tar zip unzip -y
  else
    apt install wget curl tar zip unzip -y
  fi
}

#This function will be called when user installed x-ui out of sercurity
config_after_install() {
  echo -e "${yellow}For security reasons, port and account passwords must be changed after installation/update${plain}"
  read -p "confirm whether to continue?[y/n]": config_confirm
  if [[ x"${config_confirm}" == x"y" || x"${config_confirm}" == x"Y" ]]; then
    read -p "Please set your account name:" config_account
    echo -e "${yellow}Your account name will be set to:${config_account}${plain}"
    read -p "Please set your account password:" config_password
    echo -e "${yellow}Your account password will be set to:${config_password}${plain}"
    read -p "Please set the panel access port:" config_port
    echo -e "${yellow}Your panel access port will be set to:${config_port}${plain}"
    echo -e "${yellow}Confirm the setting, setting${plain}"
    /usr/local/x-ui-persian/x-ui setting -username ${config_account} -password ${config_password}
    echo -e "${yellow}The account password is set${plain}"
    /usr/local/x-ui-persian/x-ui setting -port ${config_port}
    echo -e "${yellow}Panel port setting completed${plain}"
  else
    echo -e "${red}Canceled, all setting items are default settings, please modify in time${plain}"
  fi
}

install_x-ui() {
  systemctl stop x-ui
  systemctl stop x-ui-persian
  x-ui-persian stop
  rm -f /etc/systemd/system/x-ui.service
  rm -rf /usr/local/x-ui-persian/
  rm -rf /usr/local/x-ui/

  cd /usr/local/
  rm -f x-ui-persian-linux-debian-amd64.zip
  if [[ -e /usr/local/x-ui-persian/ ]]; then
    rm /usr/local/x-ui-persian/ -rf
  fi
  url_zip_file="https://raw.githubusercontent.com/abdal-security-group/persian-x-ui/main/x-ui-persian-linux-debian-amd64.zip"
  wget -N --no-check-certificate -O /usr/local/x-ui-persian-linux-debian-amd64.zip ${url_zip_file}
  unzip x-ui-persian-linux-debian-amd64.zip
  rm -f x-ui-persian-linux-debian-amd64.zip
  cd x-ui-persian
  chmod +x x-ui bin/xray-linux-amd64
  cp -f x-ui.service /etc/systemd/system/
  chmod +x /usr/local/x-ui-persian/x-ui-persian.sh
  cp -f /usr/local/x-ui-persian/x-ui-persian.sh /usr/bin/x-ui-persian
  chmod +x /usr/bin/x-ui-persian

  /usr/local/x-ui-persian/x-ui setting -username ebrasha -password ebrasha
  /usr/local/x-ui-persian/x-ui setting -port 1366

  echo "# Created By persian-x-ui : start" >>/etc/sysctl.conf
  echo "net.ipv4.ip_forward=1" >>/etc/sysctl.conf
  echo "net.ipv4.conf.all.accept_redirects = 0" >>/etc/sysctl.conf
  echo "# Created By persian-x-ui : End" >>/etc/sysctl.conf
  sysctl -p
  clear

  config_after_install

  echo -e "If it is a fresh installation, the default web port is ${green}1366${plain}，The default username and password are ${green}ebrasha${plain}"
  echo -e "Please make sure that this port is not occupied by other programs，${yellow}And make sure port 1366 is released${plain}"
  echo -e "If you want to modify 1366 to other ports, enter the x-ui command to modify, and also make sure that the port you modify is also allowed"
  echo -e ""
  echo -e "If updating the panel, access the panel as you did before"
  echo -e ""
  systemctl daemon-reload
  systemctl enable x-ui
  systemctl start x-ui

  echo -e "${green}persian-x-ui installation is complete, the panel is activated, "
  echo -e ""
  echo -e "x-ui How to use the management script: "
  echo -e "****** Farsi development By Ebrahim Shafiei  ******"
  echo -e ""
  echo -e "----------------------------------------------"
  echo -e "x-ui-persian              - Show admin menu (more features)"
  echo -e "x-ui-persian start        - Start the x-ui-persian panel"
  echo -e "x-ui-persian stop         - stop x-ui-persian panel"
  echo -e "x-ui-persian restart      - Restart the x-ui-persian panel"
  echo -e "x-ui-persian status       - View x-ui-persian status"
  echo -e "x-ui-persian enable       - Set x-ui-persian to start automatically at boot"
  echo -e "x-ui-persian disable      - cancel x-ui-persian autostart"
  echo -e "x-ui-persian log          - View x-ui-persian logs"
  echo -e "x-ui-persian v2-ui        - Migrate the v2-ui account data of this machine to x-ui-persian"
  echo -e "x-ui-persian update       - update x-ui-persian panel"
  echo -e "x-ui-persian install      - Install the x-ui-persian panel"
  echo -e "x-ui-persian uninstall    - Uninstall the x-ui-persian panel"
  echo -e "----------------------------------------------${plain}"

}

echo -e "${green}start installation${plain}"
install_base
install_x-ui $1