weenect

Homeassistant Custom Component for https://my.weenect.com/.

This component will set up the following platforms.

Platform	Description
binary_sensor	Adds sensors to show the connection status of your trackers.
button	Shortcuts to service. Activate Super Live Mode, Ring, Vibrate and Request a Location Update.
device_tracker	Adds your trackers as device_trackers so they appear on the map.
select	Select the update interval.
sensor	Adds sensors like signal and battery strength of your trackers.

Services

weenect.set_update_interval

Set the tracker update interval. Disable tracking by setting interval to 0S.

Name	Description	Example
update_interval	The GPS update interval. Possible values are 0S, 30S, 1M, 2M, 3M, 5M, 10M. 0S disables tracking. Battery life will be low for 30S and 1M, high for 2M and 3M and medium for 5M and 10M.	10M

weenect.activate_super_live

Activate the super live mode.

weenect.refresh_location

Request a location update.

weenect.ring

Let the tracker ring.

weenect.vibrate

Let the tracker vibrate.

Installation

HACS

The easiest way to add this to your Homeassistant installation is using HACS.

Manual

1. Using the tool of choice open the directory (folder) for your HA configuration (where you find configuration.yaml).
2. If you do not have a custom_components directory (folder) there, you need to create it.
3. In the custom_components directory (folder) create a new folder called weenect.
4. Download all the files from the custom_components/weenect/ directory (folder) in this repository.
5. Place the files you downloaded in the new directory (folder) you created.
6. Restart Home Assistant
7. In the HA UI go to "Configuration" -> "Integrations" click "+" and search for "Blueprint"

Using your HA configuration directory (folder) as a starting point you should now also have this:

custom_components/weenect/__init__.py
custom_components/weenect/button.py
custom_components/weenect/binary_sensor.py
custom_components/weenect/config_flow.py
custom_components/weenect/const.py
custom_components/weenect/device_tracker.py
custom_components/weenect/entity.py
custom_components/weenect/manifest.json
custom_components/weenect/select.py
custom_components/weenect/sensor.py
custom_components/weenect/services.py
custom_components/weenect/services.yaml
custom_components/weenect/translations/en.json

Automations

I have configured the following two automations to save battery on the tracker without having it to turn on/off by hand:

---
automation:
  - id: 743b7e7d-ffa8-4fa3-9c1c-62d9ada9ced8
    alias: "Setze Nayas Tracker Updaterate auf 1M wenn wir unterwegs sind"
    description: "Set Nayas tracker update rate to 1m when we are not at home"
    mode: single
    initial_state: true
    trigger:
      - platform: state
        entity_id: input_boolean.is_home
        from: "on"
        to: "off"
    action:
      - service: weenect.set_update_interval
        target:
            entity_id: device_tracker.naya
        data:
          update_interval: "1M"
  - id: 652b4b69-c951-4861-8b7d-3cbb15fc8b79
    alias: "Setze Nayas Tracker Updaterate auf 0S wenn wir zu Hause sind"
    description: "Set Nayas tracker update rate to 0s (disable tracking) when we are at home"
    mode: single
    initial_state: true
    trigger:
      - platform: state
        entity_id: input_boolean.is_home
        from: "off"
        to: "on"
    action:
      - service: weenect.set_update_interval
        target:
          entity_id: device_tracker.naya
        data:
          update_interval: "0S"