Skip to content

A Django middleware forwarding context-enhanced access logs to a standard logger, in a JSON-friendly way.

License

Notifications You must be signed in to change notification settings

elafarge/django-access-logger

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

11 Commits
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Access logging for Django, the right way

Introduction

A Django middleware that logs requests to the django.advanced_access_logs logger, with configurable request/response body logging policies and the ability to add custom adapters to alter your JSON payload before it is sent to the django.advanced_access_logs logger.

You can really use that logger as you would with any other logger built atop the official logging module from Python's standard library.

You can use this middleware to send exhaustive access logs as JSON to the log aggregation of your choice, would it be Fluentd (over http or by simply sending your logs to stdout and have fluentd parse them from here), Logstash, logmatic/datadog, Splunk, Sumologic, etc.

Have fun collecting and analysing your logs !

Features

  • Complete: headers, bodies (if configured to do so), duration are all logged, once installed, you get 100% visibility on what happens (or happened) in your Django applications.
  • Configurable: you can send specific request at the DEBUG level (for instance to remove health checks & other sources of noise from your logs), log bodies (or just log them in case an error occurs), obfuscate sensitive fields, add custom fields to your log entries... read below for details.
  • Pluggable: The middleware simply collects request logs, you decide how you format them and where you send them using the logging module from the standard library.
  • Compatible with Python 2 & 3 (even though you probably should be using Python3 now, in particular because we use the dict.items() method - which is considered inefficiont in Python2). It should also support older versions of Django (tested on 1.9 -> 1.11, I'd be glad to gather feedback on how things go with older/newer versions of Django).
  • Lightweight: the module only relies on standard library (+Django) and is about 300 lines of Python code. It's fast to install and easy to contribute to :)
  • Threadsafe: simply because log emission is deferred to the standard logging library, which is threadsafe. Logs will never overlap on stdout and should therefore always remain parsable.

Installation

1. Enable the middleware

As any other Django middleware, install it first:

pip install django-access-logger           # or update your requirements.txt

And simply add it to your list of enabled middleware in your Django settings:

MIDDLEWARE_CLASSES.insert(0, 'django_access_logger.AccessLogsMiddleware')

2. Configure formatters & handlers

You then need to configure a formatter and handler to tell where these access logs should go. If you need to familiarize yourself with how logging is done in Django, this page may help. Note that Django relies on the standard logging library, you might therefore want to check out this page as well.

Here's an example configuration using the dictConfig method

# in your django project settings file
MIDDLEWARE_CLASSES.insert(0, 'django_access_logger.AccessLogsMiddleware')

LOGGING = {
    'version': 1,
    'disable_existing_loggers': True,
    'formatters': {
        'bare': {
            'format': '%(message)s',
        },
    },
    'handlers': {
        'stdout': {
            'class': 'logging.StreamHandler',
            'formatter': 'bare'
        },
    },
    'loggers': {
        'django.advanced_access_logs': {
            'level': 'INFO',
            'handlers': ['stdout'],
            'propagate': False,
        },
    },
}
Note

Depending on the position of your middleware in the list, some requests might not be logged. In particular, if your middleware is triggered after an authentication middleware, requests that don't pass the authentication middleware will not be collected. It is therefore advised to put the middleware before all other middlewares, hence using insert(0, ...) instead of append().

Advanced access logging configuration

The middleware's configuration belongs to your usual Django settings file(s), in an ACCESS_LOGGER_CONFIG dict whose keys are described below.

Logging levels

4xx requests are logged at the WARNING level, 5xx at the ERROR level and other requests are logged at the INFO level. This is not configurable for now but such a feature could easily be added if required.

Sending specific requests to DEBUG

You can configure the middleware to log predetermined requests at the DEBUG level (for instance your health checks/liveness probes, etc.) and disable DEBUG logging on prod to limit the noice induced by your health checks. Moreover, you'll be able to re-enable them by simply lowering the django.advanced_access_logs logger's level to DEBUG.

# Note: even though we're
ACCESS_LOGS_CONFIG["DEBUG_REQUESTS"] = [
  {"request.path": "^/healthz$"},
  {"request.headers.user-agent", "Datadog", "request.path": "^/$"},
]

In the above example, all requests going to the healthz path will be logged with a DEBUG level, as well as requests whose User-Agent header contains the Datadog Agent string made against the / path.

Regexes and performance

Even though our regexes are precompiled when the middleware starts, Regexes in Python are known to be slow. In case you're targeting high performance (but if you're using Django you probably aren't anyways), it is better to keep the DEBUG_REQUESTS list empty.

Body logging policy

The config can be altered to log bodies depending on the logging level of the request. If BODY_LOG_LEVEL is set to None, no bodies will ever be logged. By default, BODY_LOG_LEVEL = logging.WARNING.

Additionally, you can use the MAX_BODY_SIZE parameter to limit the size of the bodies you are logging (strongly recommended). By default, MAX_BODY_SIZE = 5*1024 # 5 KiB.

ACCESS_LOGS_CONFIG["BODY_LOG_LEVEL"] = logging.DEBUG # Log all bodies
ACCESS_LOGS_CONFIG["MAX_BODY_SIZE"] = 10*1024 # 10KiB
Note

GET, HEAD, DELETE, OPTIONS, TRACE and CONNECT requests should not contain a body, therefore, we're bypassing the request body logging logic for these request types: there will be no attempt to read the request body in such cases, at least not in our middleware logic. (If you're not reading the request body either, nor is any other middleware, then the corresponding views shouldn't be vulnerable to Slowloris attacks).

Limiting the middleware's RAM usage with MAX_BODY_SIZE

In case requests (or responses) contain big bodies (typically, file uploads above a few KiBs), you have to keep in mind that these bodies will be stored in RAM. AFAIK there's no clean way to control that in Django itself, however you can at least control the number of bytes that will be logged (and therefore, copied in RAM) with MAX_BODY_SIZE, at least, you won't load big bodies in RAM twice...

Altering your logs

You might want to remove some fields from your log payload, for that, you can register an adapter that will be called after the log payload has been processed, but before it is sent to the logger. We pass you the log_dict object that contains log fields, you change it (without restrictions), that's all.

Obfuscating sensitive fields (such as basic auth passwords)

The following example shows how to add a custom adapter that removes the authorization header from the log payload after extracting the username from it in a username field (if the Authorization header contained basic auth credentials:

def obsfuscate_auth(request, log_dict):
    auth = log_dict["requests"]["headers"]["authorization"] or None
    # No authorization header could be found ? Abort !
    if auth is None:
        return

    # Let's delete the Authorization header
    del log_dict["requests"]["headers"]["authorization"]

    # If it was a Basic auth header, let's log the username (not the password)
    if auth.startswith("Basic "):
        auth = auth.replace("Basic ", "")
        try:
            auth_creds = base64.b64decode(auth.decode("utf-8")).split(":", 1)
            log_dict["requests"]["headers"]["username"] = auth_creds[0]
        except UnicodeDecodeError:
            pass

ACCESS_LOGS_CONFIG.CONFIG["ADAPTERS"] = [obfuscate_auth]

IMPORTANT NOTE: depending on what you're logging and who has access to these logs, it is your entire responsibility to anonymize/pseudonymize your logs would they contain sensitive data. In the particular context of Basic Auth, it is essential that you never logs your users' passwords!

Sending your custom log lines

You can - obviously - send custom log lines to the django.advanced_access_logs logger if you want to. However, if your message happens it the context of a request, it is probably preferable to add a field to the access log itself rather than emiting a log line that wouldn't carry request metadata. We're providing a helper tool for that: you simply need to create an extra_logs dict in your request.META entry, we'll parse it and add it to the log for you later. Be careful: your keys could overwrite existing fields which might be what you want... or not. Choose you key names with care.

# in your view
request.META["aalm_extra_logs"] = {"event": "long db call", "tag1": "parse_request"}

The event and tag1 fields will be added at the root of your log payload.

Disabling log flattening

Under the hood, your logs are stored and processed as a multilevel dict (the request field contains a dict with a headers field containing a flat dict with all the request headers. However, to be compatible with all formatters, we're flattening your log payload before sending it to our logger:

{
  "request": {
    "headers": {
      "accept": "xxx",
      "content-length": "yyy"
    }
  }
}

becomes

{
  "request.headers.accept": "xxx",
  "request.headers.content-length": "yyy"
}

If that's not the behaviour you desire (because your sending logs to a database that perfectly supports non-flat JSON documents, for instance) you can disable that behaviour with ACCESS_LOGS_CONFIG["FLATTEN"] = False.

Authors

  • Étienne Lafarge <etienne.lafarge at gmail.com>

About

A Django middleware forwarding context-enhanced access logs to a standard logger, in a JSON-friendly way.

Resources

License

Stars

Watchers

Forks

Packages

No packages published

Languages