Skip to content

ESnet SmartNIC hardware design repository.

License

Notifications You must be signed in to change notification settings

esnet/esnet-smartnic-hw

Repository files navigation

Copyright Notice

ESnet SmartNIC Copyright (c) 2024, The Regents of the University of California, through Lawrence Berkeley National Laboratory (subject to receipt of any required approvals from the U.S. Dept. of Energy), 12574861 Canada Inc., Malleable Networks Inc., and Apical Networks, Inc. All rights reserved.

If you have questions about your rights to use or distribute this software, please contact Berkeley Lab's Intellectual Property Office at IPO@lbl.gov.

NOTICE. This Software was developed under funding from the U.S. Department of Energy and the U.S. Government consequently retains certain rights. As such, the U.S. Government has been granted for itself and others acting on its behalf a paid-up, nonexclusive, irrevocable, worldwide license in the Software to reproduce, distribute copies to the public, prepare derivative works, and perform publicly and display publicly, and to permit others to do so.

ESnet SmartNIC Hardware Design Repository

This repository contains the hardware design directory for the ESnet SmartNIC platform.

The ESnet SmartNIC Platform is based on the AMD (Xilinx) OpenNIC Shell, which provides an FPGA-based NIC shell with 100Gbps Ethernet ports, and runs on the AMD (Xilinx) Alveo family of hardware boards. More information about the OpenNIC shell can be found at: https://github.com/esnet/open-nic-shell

The ESnet SmartNIC platform implements a P4-programmable packet processing core within the OpenNIC shell. The P4 processor is implemented with the AMD (Xilinx) VitisNetP4 IP core. More information about the VitisNetP4 core is available at the AMD (Xilinx) Vitis Networking P4 Secure Site (once access privileges are approved and granted). Further questions can be directed to vitisnetp4@xilinx.com.

The SmartNIC platform provides the necessary hardware datapath and control features to operate the custom VitisNetP4 processor core.

The esnet-smartnic-hw repository includes the RTL source files, verification test suites and build scripts for compiling a user P4 file into a downloadable bitfile, as well as the software artifacts necessary for seamless integration with the SmartNIC runtime firmware, which is located in a companion github repository at: https://github.com/esnet/esnet-smartnic-fw

The OpenNIC shell and SmartNIC designs are built with the AMD (Xilinx) Vivado software tool suite. The current release supports development with Vivado version 2023.2.2, running on Ubuntu 20.04 LTS. Furthermore, while the ESnet SmartNIC Platform, the AMD (Xilinx) OpenNIC shell and the AMD (Xilinx) Vivado tool suite are all public and openly available, note that the AMD (Xilinx) VitisNetP4 IP core is a commercially licensed feature that requires a site-specific license file.

The ESnet SmartNIC platform is made available in the hope that it will be useful to the networking community. Users should note that it is made available on an "as-is" basis, and should not expect any technical support or other assistance with building or using this software. For more information, please refer to the LICENSE.md file in each of the source code repositories.

The developers of the ESnet SmartNIC platform can be reached by email at smartnic@es.net.

Repository Structure and Dependencies

The ESnet SmartNIC platform is comprised of a collection of separate modular components, each maintained in their own git repository.

The platform includes the following repositories:

All dependent repositories are instantiated in the parent repository as a submodule, as depicted below:

esnet-smartnic-hw/ (parent repository)
├── esnet-fpga-library/ (submodule)
│   └── tools/
│       ├── regio/ (submodule)
│       └── svunit/ (submodule)
└── open-nic-shell/ (submodule)

esnet-smartnic-fw/ (parent repository)

Directory Structure

The directory structure for the ESnet SmartNIC hardware design repository is captured and described below.

esnet-smartnic-hw/
├── cfg/
├── config.mk
├── docs/
├── esnet-fpga-library/
├── examples/
├── LICENSE.md
├── Makefile
├── makefile.esnet
├── open-nic-shell/
├── paths.mk
├── README.md
├── scripts/
├── src/
└── test/

cfg/
  Contains global configuration files for the SmartNIC project.

config.mk
  Sets environment variables for the SmartNIC project.

docs/
  Contains documentation files for the SmartNIC platform.

esnet-fpga-library/
  Contains the ESnet FPGA Design Library (imported as a git submodule).
  This library contains general-purpose FPGA design content.

examples/
  Contains SmartNIC application design exaples.  A new application directory can be started
  by copying one of the provided example directories, or by modeling portions of the example
  directory structure.

LICENSE.md
  Contains the licensing terms and copyright notice for this repository.

Makefile
  SmartNIC platform Makefile.  Used to build the FPGA bitfile for the target application,
  as well as generate all artifacts necessary for firmware integration on the hardware platform.

makefile.esnet
  OpenNIC shell Makefile.
  Used to build the AMD (Xilinx) open-nic-shell for the target application.

open-nic_shell/
  Contains the AMD (Xilinx) OpenNIC Shell repository (imported as a git submodule).
  OpenNIC shell delivers an FPGA-based NIC shell with 100Gbps Ethernet ports,
  for use on the AMD (Xilinx) Alveo platform.

paths.mk
  Describes paths to resources provided by the SmartNIC project.

README.md
  This README file.

scripts/
  Contains SmartNIC platform scripts, for application configuration.

src/
  Contains RTL source and verification code for SmartNIC platform FPGA design components,
  captured in System Verilog.

test/
  Contains Robot Framework test suite files and Python library code for SmartNIC platform FPGA
  functional testing on hardware. Tests are executed within containers built by esnet-smartnic-fw.

Getting Started

Installing the SmartNIC Hardware Design Repository

The following steps guide a new user through the installation of the SmartNIC Hardware Design Repository, beginning with a suitably-configured host running Ubuntu 20.04 LTS Linux.

  1. Install the esnet-smartnic-hw respository by creating a clone from github into a local directory:

    > git clone https://github.com/esnet/esnet-smartnic-hw.git
    
  2. Initialize all submodules within the esnet-smartnic-hw/ design directory:

    > cd esnet-smartnic-hw
    > git submodule update --init --recursive
    
  3. Install the prerequisites required to run the esnet regio tools:

    > sudo apt install python3-yaml python3-jinja2 python3-click
    > pip3 install -r esnet-fpga-library/tools/regio/requirements.txt
    

    Note: The above instructions and more details about the regio tools can be found in the README file at: esnet-fpga-library/tools/regio/README.md

Installing and Configuring the Vivado Runtime Environment

  1. Install the AMD (Xilinx) Vivado tool suite, including the VitisNetP4 option.

  2. Configure the runtime environment by executing the settings64.sh script located in the Vivado installation directory:

    > source /tools/Xilinx/Vivado/2023.2/settings64.sh
    

    where the Vivado installation directory is located at /tools/Xilinx/Vivado/2023.2/ in this example.

  3. Set the XILINXD_LICENSE_FILE environment variable accordingly to resolve the site-specific license for the AMD (Xilinx) VitisNetp4 IP core. This can be done with a .flexlmrc file in the users home directory, or in a BASH script file (such as a .bashrc in the users home directory). The example BASH shell command is:

    > export XILINXD_LICENSE_FILE=<filename>
    

Building the SmartNIC p4_only Example Design

Build the p4_only example design by executing the p4_only application Makefile. From the esnet-smartnic-hw directory:

   > cd examples/p4_only
   > make

Upon completion, the above step creates an artifact zipfile with the default pathname: artifacts/<BUILD_NAME>/artifacts.<BOARD>.<BUILD_NAME>.0.zip

This artifact zipfile contains all of the necessary h/w artifacts to integrate with the firmware. In addition to the bitfile, it includes firmware driver files, regmap yaml files, the source p4 file, and any wireshark .lua files.

For more details about the p4_only design, as well as simulating the P4 program, refer to examples/p4_only/README.md.

Building a New P4 Application

The following steps can be taken by a new user to setup a local application design directory for building the bitfile and artifacts for a custom P4-based SmartNIC application.

  1. Install the esnet-smartnic-hw respository (as described above).

    Or, alternatively, add the esnet-smartnic-hw respository to an existing git repository as a sub-module:

    > git submodule add https://github.com/esnet/esnet-smartnic-hw.git
    
  2. Initialize all submodules within the esnet-smartnic-hw/ design directory:

    > cd esnet-smartnic-hw
    > git submodule update --init --recursive
    
  3. Install Vivado and configure the runtime environment (as described above).

  4. Return to the local application design directory and then copy the example SmartNIC application Makefile and p4/ sub-directory into the local application design directory:

    > cd ../
    > cp esnet-smartnic-hw/examples/p4_only/Makefile ./
    > cp -r esnet-smartnic-hw/examples/p4_only/p4 ./
    
  5. Using a preferred editor, edit the copied Makefile to update the SMARTNIC_DIR environment variable assignment as follows:

    #SMARTNIC_DIR := ../..
    SMARTNIC_DIR := $(CURDIR)/esnet-smartnic-hw
    
  6. Copy the application p4 file to the following location and filename:

    > cp <p4_filename> p4/`basename $PWD`.p4
    

    Note: By default, the SmartNIC scripts take the basename of the application design directory to be the name of the application, as well as its associated filenames.

  7. Build the design by executing the copied application Makefile:

    > make
    
  8. To simulate the P4 program, refer to the readme file provided in the p4/sim/ directory i.e. p4/sim/README.md

Multi-Processor Support (Ingress and Egress P4 Programs)

The ESnet SmartNIC Platform optionally supports capturing separate ingress and egress P4 programs for packet processing. In the current release, the ingress and egress processors are simply instantiated back-to-back. Application ingress traffic is processed first by the ingress P4 processor and then by the egress P4 processor, prior to being driven through the SmartNIC egress datapath.

The P4 files to be used for building these separate processors are specified in the root-level application Makefile by the P4_IGR_FILE and P4_EGR_FILE variables.

Applications that are implemented with a single P4 program should specify only the P4_IGR_FILE variable and leave the P4_EGR_FILE variable unspecified. If the P4_EGR_FILE variable is unspecified, pass-through logic is implemented instead of an egress processor.

NOTE: By default, legacy designs implementing a single P4 program are automatically mapped onto the ingress processor and implement pass-through egress logic.

In future (TBD), the SmartNIC platform may also incorporate additional support for optional RTL-customizable ingress and egress datapath functions, to augment the processing capabilities supported by the programmable P4 processors in this release.

See the p4_multi_proc example design for reference.

User Extern Function Support

The ESnet SmartNIC Platform optionally supports the integration of custom user extern function(s) that complement an application P4 program. For such a design, in addition to the appliction P4 program, a user must provide a custom C++ (.cpp) model of the extern function(s) for behavioural simulation, as well as the custom system verilog RTL code that implements the function for synthesis (and RTL simulation, if desired).

For compatibility with the automation scripts, the name of the extern top-level module MUST be vitisnetp4_igr_extern or vitisnetp4_egr_extern, depending on which P4 processor it is associated with. Also, the .cpp model MUST be located in a directory located beside the p4 test(s) directory called user_externs/ and the extern Makefile and RTL code MUST be located in a directory called src/vitisnetp4_igr_extern or src/vitisnetp4_egr_extern, again depending on which P4 processor it connects to.

See the p4_with_extern example design for reference.

P4 Programming Requirements

The P4 processing core of the SmartNIC platform is implemented with the AMD (Xilinx) VitisNetP4 IP core. In order to meet the requirements of the VitisNetP4 IP core and the SmartNIC platform, a new P4 program should consider the following guidelines.

AMD (Xilinx) P4 Architecture:

The Vitis Networking P4 compiler supports a specific pipelined datapath architecture that is comprised of 3 customizable stages: A Parser Engine, followed by a Match-Action Engine, followed by a Deparser Engine. User P4 files MUST be structured to comply with this processing architecture, and specify the custom operations desired within each of these processing stages.

More details about the AMD (Xilinx) P4 architecture can be found in the Vitis Networking P4 User Guide, UG1308 (v2023.2) Oct 18, 2023.

Include files:

The P4 program MUST include the following AMD (Xilinx) VitisNetP4 include files:

  #include <core.p4>
  #include <xsa.p4>

These files capture built-in constructs and the standard definitions for the AMD (Xilinx) P4 architecture. They are located in the Vivado installation directory at: $XILINX_VIVADO/data/ip/xilinx/vitis_net_p4_v2_0/include/p4/

Interfaces:

The P4 processing core supports 3 types of interfaces:

  • Packet Ports are the primary interfaces responsible for moving packets in and out of the core, as well as between engines. Engines can only contain a single input packet port and a single output packet port.

  • Metadata Ports carry sideband data related to a packet. Metadata can only correspond to a single packet and is processed in parallel with the packet. More on Metadata below.

  • Register IO Ports (axi4l) are used to control the contents of the Look-up engines.

Metadata Definitions:

The VitisNetP4 core supports both Standard Metadata (defined and set by the P4 core), and User Metadata (defined and set by the SmartNIC platform). Both types of metadata can be read and/or written by the P4 program.

For more details about the Standard Metadata definitions, see Vitis Networking P4 User Guide, UG1308 (v2023.2) Oct 18, 2023.

In order for the compiled VitisNetP4 core to match the SmartNIC application interface, a user P4 program MUST define the User Metadata structure as follows:

struct smartnic_metadata {
    bit<64> timestamp_ns;    // 64b timestamp (in nanoseconds). Set at packet arrival time.
    bit<16> pid;             // 16b packet id used by platform (READ ONLY - DO NOT EDIT).
    bit<3>  ingress_port;    // 3b ingress port (0:CMAC0, 1:CMAC1, 2:HOST0, 3:HOST1).
    bit<3>  egress_port;     // 3b egress port  (0:CMAC0, 1:CMAC1, 2:HOST0, 3:HOST1).
    bit<1>  truncate_enable; // 1b set to 1 to enable truncation of egress packet to 'truncate_length'.
    bit<16> truncate_length; // 16b set to desired length of egress packet (used when 'truncate_enable' == 1).
    bit<1>  rss_enable;      // 1b set to 1 to override open-nic-shell rss hash result with 'rss_entropy' value.
    bit<12> rss_entropy;     // 12b set to rss_entropy hash value (used for open-nic-shell qdma qid selection).
    bit<4>  drop_reason;     // reserved (tied to 0).
    bit<32> scratch;         // reserved (tied to 0).
}

Lookup Engines:

In order for the compiled VitisNetP4 core to match the SmartNIC application interface, a user Program MUST have:

  • One (or more) Look-up Engines.
  • No HBM BCAMs.

Support for these features may be added in a future release.

Reference Documents:

The following reference documents can be accessed from the AMD (Xilinx) Vitis Networking P4 Secure Site (once access priveleges are approved and granted):

  • Vitis Networking P4 Installation Guide and Release Notes, UG1307 (v2023.2) Oct 18, 2023.

  • Vitis Networking P4 User Guide, UG1308 (v2023.2) Oct 18, 2023.

  • Vitis Networking P4 Getting Started Guide, UG1373 (v2023.2) Oct 18, 2023.

Users may also be interested in the information at https://p4.org/.

Known Issues

  • None to date.