QSPI

Supported ESP SoCs	ESP32	ESP32-C3	ESP32-C6	ESP32-H2	ESP32-S2	ESP32-S3

Supported LCD Controllers	GC9B71	SH8601	SPD2010	ST77916	ST77922

QSPI LCD Example

The example demonstrates how to develop different model LCDs with QSPI interface using standalone drivers and test them by displaying color bars.

How to use

1. Configure drivers if needed.
2. Modify the macros in the example to match the parameters according to your hardware.
3. Navigate to the Tools menu in the Arduino IDE to choose a ESP board and configure its parameters, please refter to Configuring Supported Development Boards
4. Verify and upload the example to your ESP board.

Serial Output

...
QSPI LCD example start
Create QSPI LCD bus
Create LCD device
Draw color bar from top left to bottom right, the order is B - G - R
Draw bitmap finish callback
Draw bitmap finish callback
Draw bitmap finish callback
Draw bitmap finish callback
Draw bitmap finish callback
Draw bitmap finish callback
Draw bitmap finish callback
Draw bitmap finish callback
Draw bitmap finish callback
Draw bitmap finish callback
Draw bitmap finish callback
Draw bitmap finish callback
Draw bitmap finish callback
Draw bitmap finish callback
Draw bitmap finish callback
Draw bitmap finish callback
QSPI LCD example end
IDLE loop
IDLE loop
IDLE loop
...

Troubleshooting

Please check the FAQ first to see if the same question exists. If not, please create a Github issue. We will get back to you as soon as possible.