Skip to content

Latest commit

 

History

History

PanelTest

README.md

Panel Test Example

The example demonstrates how to develop built-in or custom development boards using the ESP_Panel driver and tests by displaying color bars and printing touch point coordinates.

How to Use

Follow the steps below to configure:

  1. For ESP32_Display_Panel:

    • Follow the steps to configure drivers if needed.
    • If using a supported development board, follow the steps to configure it.
    • If using a custom board, follow the steps to configure it.

  2. Navigate to the Tools menu in the Arduino IDE to choose a ESP board and configure its parameters. For supported boards, please refter to Configuring Supported Development Boards

  3. Verify and upload the example to your ESP board.

Serial Output

...
Panel test example start
Initialize display panel
Turn off the backlight
Draw color bar from top to bottom, the order is B - G - R
Turn on the backlight
Panel test example end
Touch point(0): x 141, y 168, strength 47
Touch point(1): x 165, y 288, strength 45
Touch point(2): x 258, y 343, strength 33
Touch point(3): x 371, y 317, strength 24
...

Troubleshooting

Please check the FAQ first to see if the same question exists. If not, please create a Github issue. We will get back to you as soon as possible.